List of publications

Transcription

Publication list
Articles in journals
AR1
AR2
AR3
AR4
AR5
AR6
AR7
AR8
AR9
AR10
AR11
AR12
AR13
AR14
AR15
AR16
AR17
AR18
AR19
AR20
AR21
AR22
AR23
AR24
Probabilistic modelling of microstructure formation in solidification processes
M. Rappaz, Ch.-A. Gandin, Acta metallurgica 41 (1993) 345.
Three-dimensional probabilistic simulation of solidification grain structures: application to superalloy precision
castings
Ch.-A. Gandin, M. Rappaz, R. Tintillier, Metallurgical transactions 24A (1993) 467.
3-Dimensional simulation of the grain formation in investment castings
Ch.-A. Gandin, M. Rappaz, R. Tintillier, Metallurgical transactions 25A (1994) 629.
A coupled finite element - cellular automaton model for the prediction of dendritic grain structures in
solidification processes
Ch.-A. Gandin, M. Rappaz, Acta metallurgica 42 (1994) 2233-46.
Process modelling and microstructure
M. Rappaz, Ch.-A. Gandin, Philosophical transactions of the royal society of London A 351 (1995) 563.
Grain texture evolution during the columnar growth of dendritic alloys
Ch.-A. Gandin, M. Rappaz, D. West, B.L. Adams, Metallurgical transactions 26A (1995) 1543.
TMS Champion H. Mathewson Award 1997.
Prediction of grain structures in various solidification processes
M. Rappaz, Ch.-A. Gandin, J.-L. Desbiolles, Ph. Thévoz, Metallurgical transactions 27A (1996) 695.
Stochastic modelling of solidification grain structures
Ch.-A. Gandin, Ch. Charbon, M. Rappaz, ISIJ international 35 (1995) 651.
Orientation dependence of primary dendrite spacing
Ch.-A. Gandin, M. Eshelman, R. Trivedi, Metallurgical and materials transactions 27A (1996) 2727.
Analytical and numerical predictions of dendritic grain envelopes
Ch.-A. Gandin, R.J. Schaefer, M. Rappaz, Acta materialia 44 (1996) 3339-47.
A 3D cellular automaton algorithm for the prediction of dendritic grain growth
Ch.-A. Gandin, M. Rappaz, Acta materialia 45 (1997) 2187-95.
Prediction of a process window for the investment casting of dendritic single crystals
A. de Bussac, Ch.-A. Gandin, Materials science and engineering A237 (1997) 35-42.
A three-dimensional cellular automaton - finite element model for the prediction of solidification grain structures
Ch.-A. Gandin, J.-L. Desbiolles, M. Rappaz, Ph. Thévoz, Metallurgical and materials transactions 30A (1999)
3153-65.
EBSD characterisation and modelling of columnar dendritic grains growing in the presence of fluid flow
H. Takatani, Ch.-A. Gandin, M. Rappaz, Acta materialia 48 (2000) 675-688.
Process modelling of grain selection during the solidification of single crystal superalloy castings
P. Carter, D. C. Cox, Ch.-A. Gandin, R. C. Reed, Materials science and engineering A280 (2000) 233-246.
From constrained to unconstrained growth during directional solidification
Ch.-A. Gandin, Acta materialia 48 (2000) 2483-2501.
Experimental study of the transition from constrained to unconstrained growth during directional solidification
Ch.-A. Gandin, ISIJ international 40 (2000) 971-979.
Stochastic modeling of dendritic grain structures
Ch.-A. Gandin, Advanced engineering materials 3 (2001) 303-306.
Ch.-A. Gandin, Materials science and technology 17 (2001) 786-789.
Ch.-A. Gandin, La revue de métallurgie (2001) 1073-1077.
Ch.-A. Gandin, ATB métallugie 41 (2001) 40-46.
Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys
Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby, H. Shercliff, La metallurgia italiana 3 (2002) 3738.
Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby, H. Shercliff, Acta materialia 50 (2002) 901-927.
In-situ precipitation in the Al-Mn-Fe-Si alloy during homogeneisation treatment
February 2012
1/16
Charles-André GANDIN
AR25
AR26
AR27
AR28
AR29
AR30
AR31
AR32
AR33
AR34
AR35
AR36
AR37
AR38
AR39
AR40
AR41
AR42
AR43
AR44
AR45
AR46
M. Dehmas, P. Archambault, M. Serrière, E. Gautier, Ch.-A. Gandin, Aluminium 78 (2002) 864-869.
Boundary layer correlation for dendrite tip growth with fluid flow
Ch.-A. Gandin, G. Guillemot, B. Appolaire, N. T. Niane, Materials science and engineering A342 (2003) 44-50,
A354 (2003) 387.
A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification
M. A. Martorano, C. Beckermann, Ch.-A. Gandin, Metallurgical and materials transactions 34A (2003) 16571674, 35A (2004) 1915.
Segregation during solidification with spongy deformation of the mushy zone
G. Lesoult, Ch.-A. Gandin, N. T. Niane, Acta materialia 51 (2003) 5263-5283, 52 (2004) 531.
Experimental and modeling studies of the thermal conditions and magnesium, iron and copper content on the
morphology of the aluminum silicon eutectic in hypoeutectic aluminium silicon alloys
G. Heiberg, Ch.-A. Gandin, H. Goerner, L. Arnberg, Metallurgical and materials transactions 35A (2004) 29812991.
A new cellular automaton - finite element coupling scheme for alloy solidification
G. Guillemot, Ch.-A. Gandin, H. Combeau, R. Heringer, Modelling and simulation in materials science and
engineering 12 (2004) 545-556.
X-ray tomography study of atomized al-cu droplets
A. Prasad, H. Henein, E. Maire, Ch.-A. Gandin, Canadian metallurgical quarterly 43 (2004) 273-282.
Modelling of precipitation in multicomponent alloys. Application to an industrial AA3003 aluminium alloy
M. Serrière, Ch.-A. Gandin, M. Dehmas, E. Gautier, P. Archambault, Aluminium 80 (2004) 592-597.
Evolution of primary precipitates in a AA3003 alloy during isothermal holdings
M. Dehmas, P. Archambault, M. Serrière, E. Gautier, Ch.-A. Gandin, Aluminium 80 (2004) 619-623.
Grain structure and segregation in microgravity castings
Ch.-A. Gandin, B. Billia, G. Zimmermann, D. J. Browne, Y. Fautrelle, in Microgravity Applications Programme Successful Teaming of Science and Industry, European Space Agency publication, SP-1290 (2005) 98-111.
Non-equilibrium solidification in microgravity: microstructure modelling of industrial alloys
D. M. Herlach, Ch.-A. Gandin, A. Garcia-Escorial, H. Henein, in Microgravity Applications Programme Successful Teaming of Science and Industry, European Space Agency publication, SP-1290 (2005) 38-48.
Understanding the rapid solidification of Al-4.3Cu and Al-17Cu using X-Ray Tomography
A. Prasad, H. Henein, E. Maire, Ch.-A. Gandin, Metallurgical and materials transactions 37A (2006) 249-257.
Modeling of macrosegregation and solidification grain structures with a coupled cellular automaton - Finite
element model
G. Guillemot, Ch.-A. Gandin, H. Combeau, ISIJ international 46 (2006) 880-895.
Atomized droplet solidification as an equiaxed growth model
R. Heringer, Ch.-A. Gandin, G. Lesoult, H. Henein, Acta materialia 54 (2006) 4427-4440.
Interaction between single grain solidification and macrosegregation: application of a cellular automaton - finite
element model
G. Guillemot, Ch.-A. Gandin, M. Bellet, Journal of crystal growth 303 (2007) 58-68.
Modeling of precipitate free zone formed upon homogenization in a multi-component alloy
Ch.-A. Gandin, A. Jacot, Acta materialia 55 (2007) 2539-2553.
Experimental and numerical modeling of equiaxed solidification in metallic alloys
Ch.-A. Gandin, S. Mosbah, Th. Volkmann, D. M. Herlach, Acta materialia 56 (2008) 3023-3035.
non-equilibrium and near-equilibrium solidification of undercooled melts of ni- and al-based alloys
D. M. Herlach, R. Lengsdorf, P. Galenko, H. Hartmann, Ch.-A. Gandin, S. Mosbah, A. Garcia-Escorial, H.
Henein, Advanced engineering materials 10 (2008) 444-452.
A comparison of cet prediction methods using simulation of the growing columnar front
S. McFadden, D.J. Browne, Ch.-A. Gandin, Metallurgical transactions 40A (2009) 662-672.
The effect of eutectic undercooling on microsegregation of rapidly solidified al-cu powders
A. Prasad, H. Henein, Ch.-A. Gandin, Journal of the Japan society of microgravity application 25 (2008) 449452.
A generalized segregation model for concurrent dendritic, peritectic and eutectic solidification
D. Tourret, Ch.-A. Gandin, Acta materialia 57 (2009) 2066-2079.
A solidification model for atomization
A. Prasad, S. Mosbah, H. Henein, Ch.-A. Gandin, ISIJ international 49 (2009) 992-999.
Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys
M. Bellet, H. Combeau, Y. Fautrelle, D. Gobin, M. Rady, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A.
Kumar, Ch.-A. Gandin, B. Goyeau, S. Mosbah, M. Založnik, International journal of thermal sciences 48 (2009)
January 2013
2/16
AR47
AR48
AR49
AR50
AR51
AR52
AR53
AR54
AR55
AR56
2013-2016, 49 (2010) 1318.
Numerical modeling of columnar to equiaxed transition – application to microgravity experiments
A. Noeppel, O. Budenkova, G. Zimmermann, L. Sturz, N. Mangelinck-Noël, H. Jung, H. Nguyen-Thi, B. Billia,
Ch.-A. Gandin, Y. Fautrelle, International journal of cast metals research 22 (2009) 34-38.
Experimental and numerical modeling of segregation in metallic alloys
S. Mosbah, M. Bellet, Ch.-A. Gandin, Metallurgical and materials transactions 41 (2010) 651-669.
Prediction of solidification paths for Fe-C-Cr Alloys by a multiphase segregation model coupled to
thermodynamic equilibrium calculations
H. Zhang, Ch.-A. Gandin, H. Ben Hamouda, D. Tourret, K. Nakajima, J. He, ISIJ international 50 (2010) 18591866.
Modeling of solidification: grain structures and segregations in metallic alloys
Ch.-A. Gandin, Compte rendus physique 11 (2010) 216-225.
Droplet solidification of impulse atomized Al-0.61Fe and Al-1.9Fe
H. Henein, V. Buchoud, R.-R. Schmidt, C. Watt, D. Malahof, Ch.-A. Gandin, G. Lesoult, V. Uhlenwinkel,
Canadian metallurgical quarterly 49 (2010) 275-292.
MetSoc best paper award 2011.
Multiple non-equilibrium phase transformations: Modeling versus electro-magnetic levitation experiment
D. Tourret, Ch.-A. Gandin, Th. Volkmann, D. M. Herlach, Acta materialia 59 (2011) 4665-4677.
Gas atomization of Al-Ni powders: solidification modeling and neutron diffraction analysis
D. Tourret, G. Reinhart, Ch.-A. Gandin, G. N. Iles, U. Dahlborg, M. Calvo-Dahlborg, C. M. Bao, Acta materialia
59 (2011) 6658-6669.
3D CAFE modeling of grain structures: Application to primary dendritic and secondary eutectic solidification
T. Carozzani, H. Digonnet, Ch.-A. Gandin, Modeling and simulation in materials science and engineering 20
(2012) 015010.
Direct Simulation of a Solidification Benchmark Experiment
T. Carozzani, Ch.-A. Gandin, H. Digonnet, M. Bellet, K. Zaidat, Y. Fautrelle, Metallurgical and Materials
Transactions A 44 (2013) 873-887.
Prediction of carbide precipitation using partial equilibrium approximation in Fe-C-V-W-Cr-Mo high speed steels
Hongwei Zhang, Keiji Nakajima, Charles-André Gandin, Jicheng He, ISIJ international (2013) in press.
Invited communications with proceedings
IW1
IW2
IW3
IW4
IW5
IW6
Probabilistic modeling of grain formation in solidification processes
Ch.-A. Gandin, Ch. Charbon, M. Rappaz, in Modeling of Casting, Welding and Advanced Solidification
Processes VI, Eds. T.S. Piwonka, V. Voller, L. Katgerman, 21. TMS (Warrendale, US) 1993
VITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Palm Coast, US)
1993
Prediction of grain structures in various solidification processes
M. Rappaz, Ch.-A. Gandin, J.-L. Desbiolles, Ph. Thévoz, Metallurgical transactions 27A (1996) 695
TMS conference (Chicago, US) 1994
Computer simulation of microstructure formation
M. Rappaz, Ch.-A. Gandin, Ch. Charbon, in Solidification and Properties of Cast Alloys, Ed. International
Committee of Foundry Technical Associations, 49. Giesserei-Verlag GMBH (Düsseldorf, D) 1996
Technical Forum of the 61st World Foundry Congress (Beijing, CN) 1995
Process modelling and microstructure
M. Rappaz, Ch.-A. Gandin, Philosophical transactions of the royal society of London A 351 (1995) 563
M. Rappaz, Ch.-A. Gandin, in High Temperature and Structural Materials, Eds. R.W. Cahn, A.G. Evans,
M. McLean, 145. Chapman & Hall (London, GB) 1996
Discussion Meeting High Temperature and Structural Materials (London, GB) 1995
Modeling of microstructure formation
M. Rappaz, Ch.-A. Gandin, A. Jacot, Ch. Charbon, Modeling of Casting, Welding and Advanced Solidification
Processes VII, 501. TMS (Warrendale, US) 1995
VIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (London, GB) 1995
Modelling of as-cast structures
M. Rappaz, X. Doré, Ch.-A. Gandin, A. Jacot, T. Jalanti, in Materials science forum, Eds. H. Driver, B. Dubost,
F. Durand, R. Fougères, P. Guyot, P. Sainfort, M. Suéry, vols 217-222, 7. Trans Tech Publications Ltd
January 2013
3/16
IW7
IW8
IW9
IW10
IW11
IW12
IW13
IW14
IW15
IW16
IW17
IW18
IW19
(Aedermannsdorf, CH) 1996
The 5Th. International Conference on Aluminium Alloys (Grenoble, FR) 1996
Ch.-A. Gandin, T. Jalanti, M. Rappaz, in Solidification Microstructures, CD-ROM editors M. Rappaz, R. Trivedi,
Ecole Polytechnique Fédérale de Lausanne (Lausanne, CH) 1998
2nd Workshop on Solidification Microstructures (Zermatt, CH) 1998
Modeling of dendritic grain structures
Ch.-A. Gandin, T. Jalanti, M. Rappaz, in Modeling of Casting, Welding and Advanced Solidification
Processes VIII, 363. TMS (Warrendale, US) 1998
VIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (San Diego, US)
1998
Growth of columnar dendritic grains with fluid Flow
Ch.-A. Gandin, H. Takatani, M. Rappaz, in Cutting edge of computer simulation of solidification and processes,
37-47 (1999)
(Osaka, JP) 14-16 November 1999
Modélisation de la solidification et des traitements thermiques pour la prédiction de la limite d'elasticité des
alliages de fonderie
Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby, H. Shercliff, in Mécanismes et déformations dans
les matériaux multi-constituants, editors D. Favier, S. Gustave, L. Orgéas, CNRS-UJF-INPG (2002) 8-15
Colloque MECAMAT (Aussois, FR) 21-25 January 2002
Stochastic modelling of columnar solidification grain structures
Ch.-A. Gandin, G. Guillemot, in Computational modelling and simulation of materials II, editor P. Vincenzini,
Techna srl. (2002) pp. 239-250
International Conference on Modern Materials & Technologies (CIMTEC) & 3rd Forum on New Materials
(Firenze, IT) 14-19 July 2002
Modelling of precipitation in multicomponent alloys coupled with ThermoCalc calculations: Application to the
homogenisation heat treatment of an AA3003 alloy
M. Serrière, Ch.-A. Gandin, Q. Du, A. Jacot, E. Gautier, P. Archambault, M. Dehmas, CD-ROM, INPG 2004
CPR precipitation, workshop (Autrans, FR) 6-9 October 2003
Contribution to the knowledge of the formation of the skin in continuous casting of steel
G. Lesoult, J.-M. Jolivet, L. Ladeuille, Ch.-A. Gandin, in Solidification Processes and Microstructures: A
Symposium in Honor of Prof. W. Kurz, editors M. Rappaz, C. Beckermann, R. Trivedi, TMS (2004), pp. 15-26
TMS Annual Meeting (Charlotte, US) 14-18 March 2004
Columnar-to-Equiaxed Transition in SOLidification Processing (CETSOL): a project of the European Space
Agency (ESA) - Microgravity Applications Promotion (MAP) programme
Ch.-A. Gandin, B. Billia, G. Zimmermann, D. J. Browne, M.-D. Dupouy, G. Guillemot, H. Nguyen-Thi,
N. Mangelinck-Noël, G. Reinhart, L. Sturz, S. Mc Fadden, J. Banaszek, Y. Fautrelle, K. Zaidat, A. Ciobanas, in
Solidification and Gravity IV, editors A Roósz, M. Rettenmayr, Z. Gácsi, Materials Science Forum 508 (2006)
393-404. Trans Tech Publications Ltd (Aedermannsdorf, CH)
Solidification and Gravity 04 (Miskolc, HU) 6-9 Septembre 2004
Modelling of grain structure and segregation in casting
Ch.-A. Gandin, G. Guillemot, H. Combeau, in Current advances in materials and processes (CAMP-ISIJ),
Vol.18 (2005), No.4, pp. 884-885
(The 150th Meeting of the Iron and Steel Institute of Japan (Hiroshima, JP) 28-30 September 2005
Modeling of solidification structures with a cellular automaton method
G. Guillemot, Ch.-A. Gandin, M. Bellet, Journal of crystal growth 303 (2007) 58-68
5th International Workshop on Modeling in Crystal Growth (IWMCG-5) (Bamberg, DE) 10-13 September 2006
Modelling microstructure evolution during solidification and heat treatment of aluminium alloys
A. Jacot, Ch.-A. Gandin
8th International Seminar, Numerical Analysis of Weldability (Seggau, AT) 25-27 September 2006
Modelling of heat and solute interactions upon grain structure solidification
Ch.-A. Gandin, J. Blaizot, S. Mosbah, M. Bellet, G. Zimmermann, L. Sturz, D. J. Browne, S. McFadden,
H. Jung, B. Billia, N. Mangelinck, H. Nguyen-Thi, Y. Fautrelle, X. Wang, in Proceedings of the Solidification and
Gravity conference, editors A. Roósz, V. Mertinger, P. Barkóczy, Cs. Hoó, Materials science forum 649 (2010)
pp. 189-198. Trans Tech Publications Ltd (Aedermannsdorf, CH)
Conference Solidification and Gravity 2008 (Miskolc, HU) 31 August - 4 September 2008
A solidification model for atomization
January 2013
4/16
IW20
IW21
IW22
IW23
A. Prasad, S. Mosbah, H. Henein, Ch.-A. Gandin, ISIJ international 49 (2009) 992-999
Solidification forum of the Iron and Steel Institute of Japan (Tokyo, JP) 10-11 November 2008
Prediction of solidification paths for Fe-C-Cr alloys by a multiphase segregation model coupled to
H. Zhang, Ch.-A. Gandin, H. Ben Hamouda, D. Tourret, K. Nakajima, J. He, ISIJ international 50 (2010) 18591866
Computer Simulation of Solidification and Casting (Sapporo, JP) 3-5 February 2010
Formation de macroségrégations pendant la solidification d’un alliage Sn-Pb : Synthèse des premiers résultats
d’un benchmark
H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar,
S. Mosbah, M. Rady, Ch.-A. Gandin, B. Goyeau, M. Založnik, 2010. DVD-Rom published by the Fédération
Française des Matériaux, ISBN 978-2-9528-1403-4 (2010) 9 pages
Matériaux 2010 (Nantes, FR) 18-22 October 2010
Investigation of columnar-to-equiaxed transition in solidification processing of AlSi alloys in microgravity – The
CETSOL project
G. Zimmermann, L. Sturz, B. Billia, N. Mangelinck-Noël, H. Nguyen Thi, Ch.-A. Gandin, D. J. Browne,
W. U. Mirihanage, Journal of physics: conference series 327 (2011) 012003
International Symposium on Physical Sciences in Space (Bonn, DE) 11-15 July 2011
Analysis of a numerical benchmark for columnar solidification of binary alloys
H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Du Terrail, A. Kumar,
Ch.-A. Gandin, B. Goyeau, S. Mosbah, T. Quatravaux, M. Rady, M. Založnik, IOP Conf. Series: Materials
Science and Engineering 33 (2012) 012086.
XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT)
17-22 June 2012
Invited communications without proceedings
IO1
IO2
IO3
IO4
IO5
IO6
IO7
IO8
Structures et textures de grains
M. Rappaz, Ch. Charbon, Ch.-A. Gandin, Journées d'Automne de la SF2M, 39
(Paris, FR) 1995
Columnar grain selection in dendritic alloys
Ch.-A. Gandin, M. Rappaz, 1004
Congrès de la Société Française de Physique (Marseille, FR) 1995
Modeling dendritic structures by means of cellular automata
Ch.-A. Gandin
Workshop on Multiscale Materials Prediction: Fundamentals and Industrial Applications, Massachusetts
Institute of Technology (Cambridge, US) 1997
Solidification and structures
M. Rappaz, S. Henry, Ch.-A. Gandin
Multiscale Modeling and Grand Challenge Problems in Materials Research (Lyon, FR) 1997
Solidification and structures
M. Rappaz, Ch.-A. Gandin, S. Henry
ESAFORM (Sophia Antipolis, FR) 17-20 March 1998
Stochastic modelling of dendritic grain structures
Ch.-A. Gandin, Journées d'Automne de la SF2M, 35
(Paris, FR) 2-3 November 1999
Growth of Columnar Dendritic Grain Structure with Fluid Flow (EBSD and 3D CAFE modeling applied to
continuous casting)
H. Takatani, Ch.-A. Gandin, M. Rappaz
MRS Fall Meeting, Symposium C: Microstructural Modeling of Industrial Metals Processing (Boston, US) 29-30
November 1999
Modélisation par automate cellulaire des structures de grains dendritiques dans les procédés de solidification
Ch.-A. Gandin
Journée thématique CIM-ENSMN/PCMM-UHP Simulation Numérique en Sciences de la Matière et des
Matériaux (Nancy, FR) 16 December 1999
January 2013
5/16
IO9
IO10
IO11
IO12
IO13
IO14
IO15
IO16
IO17
IO18
IO19
IO20
IO21
IO22
IO23
Modelling of solidification structures
M. Rappaz, Ch.-A. Gandin, J.-L. Desbiolles, Ph. Thévoz
DGM Conference (Aachen, DE) 1999
From constrained to unconstrained growth during directional Solidification
Ch.-A. Gandin
MRS Spring Meeting, Symposium O: Materials Computation: Progress Towards Technological Relevance (San
Francisco, US) 24-28 April 2000
Evolution of constituent particles during homogeneisation
E. Gautier, A. Jacot, M. Rappaz, M. Dehmas, M. Serrière, P. Archambault, Ch.-A. Gandin, A.-L. Dons, Y. Li,
L. Arnberg
VIR[*] Conference, CORUS (Ijmuiden, NL) 8-12 April 2002
Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby, H. Shercliff
Conference Junior Euromat 2002, Université de Lausanne (UNIL) (Lausanne, CH) 2-5 September 2002
Segregation during solidification with mushy zone deformation
G. Lesoult, Ch.-A. Gandin, N. T. Niane
Meeting of the EU-network MEBSP, RWTH (Aachen, DE) 25-27 September 2002
Modelling of microstructure evolution
Ch.-A. Gandin
ESF-ESSC Workshop Scientific perspectives of ELIPS - ISS utilisation programmes (Obernai, FR) 5-7 May
2004
Modelling of solidification structures and segregations in casting processes – part i: introduction to cellular
automaton - finite element models
Ch.-A. Gandin
Key Laboratory of National Education Ministry for electromagnetic Processing of Materials, Northeastern
University (Shenyang, CN) 26 September 2005
Modelling of solidification structures and segregations in casting processes – part ii: recent advances of cellular
automaton - finite element models
Ch.-A. Gandin
Key Laboratory of National Education Ministry for electromagnetic Processing of Materials, Northeastern
University (Shenyang, CN) 26 September 2005
Influence of macrosegregation on developing grain structures: a comparison of predictions with experimental
observations
G. Guillemot, Ch.-A. Gandin, M. Bellet
Symposium « Solidification Modelling and Microstructure Formation: A Symposium in Honor of Prof. John Hunt
», part of the TMS Annual Meeting (San Antonio, US) 12-16 March 2006
Modeling of precipitate free zone developing upon heat treatment in industrial aluminum casting
Ch.-A. Gandin, A. Jacot
Symposium « Simulation of Aluminum Shape Casting Processing: From Alloy Design to Mechanical
Properties », part of the TMS Annual Meeting (San Antonio, US) 12-16 March 2006
Modélisation de la précipitation dans un alliage d’aluminium. Couplage avec l’interface TQ et avec des calculs
d’homogénéisation
Réunion des utilisateurs de ThermoCalc (Clermont-Ferrand, FR) 27-28 March 2006
Modelling of solidification microstructures
Ch.-A. Gandin
8th International Summer School on Aluminium Alloys (Trondheim, NO) 21-25 August 2006
Study of samples produced by electromagnetic levitation (EML) as a model for equiaxed solidification
Ch.-A. Gandin, S. Mosbah, J. Brogly, Th. Volkmann, D. Herlach
Symposium « Critical Issues and Future Directions in Solidification Science » in honor of Rohit Trivedi (Ames,
US) 20-22 September 2006
Modeling of precipitate free zone formed upon homogenization in multi-component alloys
A microsegregation model for multiple phase transformations - Application to droplet solidification of aluminiumnickel alloys
D. Tourret, Ch.-A. Gandin
January 2013
6/16
IO24
IO25
IO26
IO27
IO28
IO29
IO30
IO31
IO32
IO33
IO34
IO35
IO36
Microsegregation modelling of multiple phase transformations
Ch.-A. Gandin, D. Tourret
Symposium « Frontiers in Solidification Science III », 2009 TMS Annual Meeting & Exhibition (San Francisco,
US) 15-19 February 2009
Modeling of precipitate-free zone formed upon homogenization in a multi-component alloy
Workshop on Extrusion of Aluminium Alloys, University of British Columbia (Vancouver, CA) 4-5 June 2009
From microstructure to processes – monte carlo / cellular automaton
A. Jacot, Ch.-A. Gandin
Competence Centre for Materials Science and Technology, Summer School Course on Modeling in Materials
Science: Theory and Applications, Ecole Polytechnique Fédérale de Lausanne (Lausanne, CH) 26-28 August
2009
Ingénierie de la structure de grains de matériaux pour le transport et l’énergie solaire
N. Mangelinck, B. Billia, A. Garcia, J.-E. Spinelli, Ch.-A. Gandin
Colloque ARCUS (Sao Paulo, BR) 4-6 October 2009
Modeling of solidification structures and segregations in Al – 7 wt% Si
Ch.-A. Gandin, M. Bellet, S. Mosbah, K. Sabat Da Cruz, N. Mangelinck, B. Billia
4th International Conference on Solidification Science and Processes (Chennai, IN) 20 November 2009
Solidification modelling for aeronautical parts
Ch.-A. Gandin, S. Fargeas, D. Locatelli
23rd 3AF colloquium Materials for Aerospace & Aeronautical Applications (Paris, FR) 7-8 December 2009
Direct simulation of an in-situ real time X-ray solidification experiment
Ch.-A. Gandin, G. Reinhart, N. Mangelinck-Noël, H. Nguyen-Thi, B. Billia, J. Baruchel
DPG-MM meeting (Dresden, DE) 17 March 2011
Influence of convection on the solidification of a refined Al-3.5wt%Ni alloy: comparison between real-time X-ray
observation and direct simulation
G. Reinhart, N. Mangelinck-Noël, Ch.-A. Gandin, H. Nguyen-Thi, J.E. Spinelli, B. Billia
Conference EUROMAT (Montpellier, FR) 12-18 September 2011
Structure and phase competitions during solidification
Ch.-A. Gandin
The John Hunt International Symposium, Brunel University (London, GB) 12-14 December 2011
Solidification Modeling: from ElectroMagnetic Levitation to Atomization Processing
Charles-André Gandin, Damien Tourret, Thomas Volkmann, Dieter Herlach, Arash Ilbagi, Hani Henein
Symposium « Materials Research in Microgravity », 2012 TMS Annual Meeting & Exhibition (Orlando, US) 1115 March 2012
ISS-Experiments of Columnar-to-Equiaxed Transition in Solidification Processing
Laszlo Sturz; Gerhard Zimmermann; Charles-Andre Gandin; Bernard Billia; Nathalie Mangelinck; Henry
Nguyen-Thi; David John Browne; Wajira U. Mirihanage; Daniela Voss; Christoph Beckermann; Alain Karma
Symposium « Materials Research in Microgravity », 2012 TMS Annual Meeting & Exhibition (Orlando, US) 1115 March 2012. NASA/CP-2012-217466.
3D CAFE Simulation of a Macrosegregation Benchmark Experiment
Charles-André Gandin, Tommy Carozzani, Hugues Digonnet, Michel Bellet
Symposium « CFD Modeling and Simulation in Materials Processing », 2012 TMS Annual Meeting & Exhibition
(Orlando, US) 11-15 March 2012
Meso Scale Modeling: Monte Carlo and Cellular Automata
Ch.-A. Gandin
Competence Centre for Materials Science and Technology, Summer School Course on Modeling in Materials
Science: Theory and Applications, Ecole Polytechnique Fédérale de Lausanne (Lausanne, CH) 29-31 August
2012
Communications with proceedings
CW1
Probabilistic modelling of microstructure formation in solidification processes
Ch.-A. Gandin, M. Rappaz, in Computer Aided Innovation of New Materials II, Eds. M. Doyama, J. Kihara,
January 2013
7/16
CW2
CW3
CW4
CW5
CW6
CW7
CW8
CW9
CW10
CW11
CW12
CW13
CW14
M. Tanaka, R. Yamamoto, 359. Elsevier (Amsterdam, NL) 1993
CAMSE'92, Pacifico Yokohama (Yokohama, JP) 1992
Modeling of dendritic single crystal solidification at the macro- and microscopic levels: application to turbine
blades
Th. Imwinkelried, J.-L. Desbiolles, Ch.-A. Gandin, M. Rappaz, S. Rossmann, Ph. Thévoz, in Modeling of
Casting, Welding and Advanced Solidification Processes VI, Eds. T.S. Piwonka, V. Voller, L. Katgerman, 63.
TMS (Warrendale, US) 1993. Poster presentation.
VITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Palm Coast, US)
1993
Simulation and experimental investigation of grain selection during columnar growth
Ch.-A. Gandin, M. Rappaz, Materials Processing in the Computer Age II, Eds. V.R. Voller, S.P. Marsh,
N. El-Kaddah, 117. TMS (Warrendale, US) 1995
TMS conference (Las Vegas, US) 1995
Application of inverse methods to the estimation of boundary conditions and properties
M. Rappaz, J.-L. Desbiolles, J.M. Drezet, Ch.-A. Gandin, A. Jacot, Ph. Thévoz, Modeling of Casting, Welding
and Advanced Solidification Processes VII, 449. TMS (Warrendale, US) 1995. Poster presentation.
VIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (London, GB) 1995
3D modelling of dendritic grain structures in a turbine blade investment cast part
Ch.-A. Gandin, M. Rappaz, J.-L. Desbiolles, E. Lopez, M Swierkosz, Ph Thévoz, in Solidification Processing 97,
Eds. J. Beech, H. Jones, 289. The University of Sheffield (Sheffield, GB) 1997
4Th. Decennial International Conference on Solidification Processing (Sheffield, GB) 1997
3D modeling of dendritic grain structures in turbine blade investment cast parts
Ch.-A. Gandin, M. Rappaz, J.-L. Desbiolles, E. Lopez, M. Swierkosz, Ph. Thévoz, in Superalloys 718, 625, 706
and Various Derivatives, Ed. E.A. Loria, 121. TMS (Warrendale, US) 1997. Poster presentation.
Superalloys 718, 625, 706 and Various Derivatives (Pittsburgh, US) 1997
A 3D CAFE model for the prediction of solidification grain structures
J.-L. Desbiolles, Ch.-A. Gandin, J.-F. Joyeux, M. Rappaz, Ph. Thévoz, in Modeling of Casting, Welding and
Advanced Solidification Processes VIII, 433. TMS (Warrendale, US) 1998. Poster presentation.
1998
Prediction of stray crystal formation during solidification of dendritic alloys
A. de Bussac, Ch.-A. Gandin, in Modeling of Casting, Welding and Advanced Solidification Processes VIII, 407.
TMS (Warrendale, US) 1998. Poster presentation.
1998
Modelling of solidification Microstructures
M. Rappaz, J.-L. Desbiolles, Ch.-A. Gandin, S. Henry, A. Sémoroz, Ph. Thévoz, in Solidification and Gravity
2000, Eds A. Roosz, M. Rettenmayr, D. Watring, Materials Science Forum, Trans Tech Publications Ltd
(Aedermannsdorf, CH) 329-330 (2000) 389-396
Third International Conference on Solidification and Gravity (Miskolc, HU) 26-29 April 1999
Process modelling of grain selection during the solidification of single crystal superalloy castings
P. Carter, D. C. Cox, Ch.-A. Gandin, R. C. Reed, in The Second Oxford Kobe Materials Seminar: Solidification
and Casting, 138-148 (1999)
(Kobe, JP) 21-24 September 1999
Etude expérimentale de la solidification initiale des aciers
L. Ladeuille, Ch.-A. Gandin, C. Bourgraff, G. Lesoult, Récents Progrès en Génie des Procédés, Vol. 14, N° 73,
83-88. Ed. M.-N. Pons, Société Française de Génie des Procédés (Nancy, FR) 2000
PROMEMA (Nancy, FR) 15 May 2000
From constrained to unconstrained growth during directional solidification
Ch.-A. Gandin, Modeling of Casting, Welding and Advanced Solidification Processes IX, 473-480. TMS
(Warrendale, US) 2000
IXTh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Aachen, DE) 20-25
August 2000
Ch.-A. Gandin, Y. Bréchet, M. Rappaz, G. Canova, M. Ashby, H. Shercliff, CD-ROM, AIM, Milano, IT (2001)
Euromat 2001 Conference (Rimini, IT) 10-14 June 2001
Modeling of precipitation coupled with thermodynamic calculations
January 2013
8/16
CW15
CW16
CW17
CW18
CW19
CW20
CW21
CW22
CW23
CW24
CW25
CW26
CW27
M. Serrière, Ch.-A. Gandin, E. Gautier, P. Archambault, M. Dehmas, in Materials Science Forum, Eds. P. J.
Gregson, S. J. Harris, vols 396-402, pp. 747-752. Trans Tech Publications Ltd (Aedermannsdorf, CH) 2002
The 8Th. International Conference on Aluminium Alloys (Cambridge, GB) 2-5 July 2002
A study of microsegregation in Al-Cu alloys using impulse atomization as an RSP
A. Prasad, H. Henein, Ch.-A. Gandin, Light Metals 2002 Métaux Légers, editor T. Lewis, MetSoc of CIM, 2002,
pp. 101-114
COM2002 (Montréal, CA) 11-14 August 2002
Modélisation numérique de la solidification de gouttelettes métalliques surfondues - Analyse thermique
R. Heringer, Ch.-A. Gandin, G. Lesoult, Matériaux 2002 De la conception à la mise en oeuvre, CD-ROM
Matériaux 2002 (Tours, FR) 21-25 October 2002
Etablissement des microstructures aux premiers instants de la solidification
L. Ladeuille, D. Daloz, Ch.-A. Gandin, C. Bourgraff, G. Lesoult, Matériaux 2002 De la conception à la mise en
oeuvre, CD-ROM
Matériaux 2002 (Tours, FR) 21-25 October 2002
Heat flow modeling of equiaxed solidification
R. Heringer, Ch.-A. Gandin, G. Lesoult, Modeling of Casting, Welding and Advanced Solidification Processes X,
pp. 549-556. TMS (Warrendale, US) 2003
XTh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Destin, US) 25-30
May 2003
New coupling scheme for a heat flow cellular automaton - finite element model applied to alloy solidification
G. Guillemot, Ch.-A. Gandin, H. Combeau, R. Heringer, in Proceedings of the 2003 International Symposium on
Liquid Metal Processing and Casting, editors P. D. Lee, A. Mitchell, J.-P. Bellot, A. Jardy (2003) pp. 193-203
International Symposium on Liquid Metal Processing and Casting (Nancy, FR) 21-24 September 2003
Modeling of macrosegregation and solidification grain structures with a coupled cellular automaton - finite
element method
G. Guillemot, Ch.-A. Gandin, H. Combeau, in Solidification Processes and Microstructures: A Symposium in
Honor of Prof. W. Kurz, editors M. Rappaz, C. Beckermann, R. Trivedi, TMS (2004) pp. 157-163
TMS Annual Meeting (Charlotte, US) 14-18 March 2004
X-ray tomography study of atomized Al-Cu droplets
A. Prasad, H. Henein, E. Maire, Ch.-A. Gandin, in Light Metals 2003 Métaux légers, editors J. Masounave,
G. Dufour, MetSoc of CIM (2003) pp 187-202
COM2003 (Vancouver, CA) 24-27 August 2003
Columnar-Equiaxed Transition in SOLidification processing: The ESA-MAP CETSOL project
B. Billia, Ch.-A. Gandin, G. Zimmermann, D. Browne, M.-D. Dupouy, in Microgravity Science and Technology
Journal 16 (2005) 20-25. Poster presentation
2nd International Symposium on Physical Sciences in Space (Toronto, CA) 23-27 May 2004
Segregation with spongy deformation of the mushy zone during solidification of the skin of steel cast products
N. T. Niane, Ch.-A. Gandin, G. Lesoult, in Proceedings of the Solidification and Gravity conference, editors
A. Roósz, M. Rettenmayr, Z. Gácsi, Materials Science Forum 508 (2006) pp.175-180. Trans Tech Publications
Ltd (Aedermannsdorf, CH)
Solidification and Gravity 04 (Miskolc, HU) 6-9 Septembre 2004
Heat flow modeling of equiaxed solidification
R. Heringer, Ch.-A. Gandin, G. Lesoult, H. Henein, in Proceedings of COBEM 2005, ABCM (2005).
18th International Congress of Mechanical Engineering (Ouro Preto, BR) 6-11 November 2005
Interactions between columnar solidification and segregation: a comparison of the predictions of a CAFE model
with in-situ observations
G. Guillemot, Ch.-A. Gandin, M. Bellet, in Modeling of Casting, Welding and Advanced Solidification
Processes XI, Eds. Ch.-A. Gandin, M. Bellet, 307-314. TMS (Warrendale, US) 2006. Poster presentation
XITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Opio, FR) 28 May-2
June 2006
A comprehensive model for the description of microstructure evolution during solidification and homogenizaton
of multicomponent aluminium alloys
A. Jacot, Ch.-A. Gandin, in Modeling of Casting, Welding and Advanced Solidification Processes XI,
Eds. Ch.-A. Gandin, M. Bellet, 553-560. TMS (Warrendale, US) 2006. Poster presentation
June 2006
Microsegregation Modeling of Rapidly Solidified Al-Cu Droplets
January 2013
9/16
CW28
CW29
CW30
CW31
CW32
CW33
CW34
CW35
CW36
CW37
CW38
CW39
CW40
CW41
A. Prasad, H. Henein, Ch.-A. Gandin, in Modeling of Casting, Welding and Advanced Solidification
Processes XI, Eds. Ch.-A. Gandin, M. Bellet, 577-584. TMS (Warrendale, US) 2006. Poster presentation
June 2006
Metallurgical study of Al-Cu samples solidified upon electromagnetic levitation
S. Mosbah, Ch.-A. Gandin, J. Brogly, B. Crozier, Th. Volkmann, D. Herlach, in Solidification Processing 07,
Eds. H. Jones. The University of Sheffield (Sheffield, GB) 2007, 80
5th Decennial International Conference on Solidification Processes (Sheffield, GB) 23-25 July 2007
Modeling of segregation upon solidification of undercooled melt – the role of eutectic recalescence
S. Mosbah, Ch.-A. Gandin
3rd International Symposium on Physical Sciences in Space (Nara, JP) 22-26 October 2007
Non-equilibrium solidification, modeling for microstructure engineering of industrial alloys
D.M. Herlach, R. Lengsdorf, S. Reutzel, P. Galenko, Ch.-A. Gandin, S. Mosbah, A. Garcia-Escorial, H. Henein
The effect of eutectic undercooling on microsegregation of rapidly solidified Al-Cu droplets
A. Prasad, H. Henein, Ch.-A. Gandin
Directional solidification experiments on the international space station
D. Voss, M. Martella, Th. Peignier, O. Minster, D. Jarvis, L. Ratke, S. Steinbach, B. Billia, H. Nguyen-Thi,
N. Mangelinck-Noel, Ch.-A. Gandin, G. Zimmermann, S. Rex, F. Kohler, M. Rappaz, H. Lenski, P. Neuhaus,
S. Cantaloup. Poster presentation
Electromagnetic levitation on board the international space station
D. Voss, O. Minster, D. Jarvis, P. Manieri, W. Dreier, R. Kuhl, I. Egry, D. Herlach, M. Kolbe, Th. Volkmann,
G. Lohoefer, D. Holland-Moritz, W. Loeser, R. Hermann, Ch.-A. Gandin, L. Battezzati, J. Etay, H.-J. Fecht,
R. Wunderlich, E. Ricci, G. Pottlacher, S. Seetharaman. Poster Presentation
Modelling of diffusion based segregation with a coupled cellular automaton - finite element model
S. Mosbah, M. Bellet, Ch.-A. Gandin
Journées Annuelles de la Société Française de Métallurgie et de Matériaux (Paris, FR) 4-6 June 2008
A microsegregation model for multiple phase transformations - Application to droplet solidification of aluminiumnickel alloys
Journées Annuelles de la Société Française de Métallurgie et de Matériaux (Paris, FR) 4-6 June 2008
Numerical modeling of columnar to equiaxed transition – application to microgravity experiments
A. Noeppel, O. Budenkova, G. Zimmermann, L. Sturz, N. Mangelinck-Noël, H. Jung, H. Nguyen-Thi, B. Billia,
Ch.-A. Gandin, Y. Fautrelle, International Journal of Cast Metals Research 22 (2009) 34-38
International Conference on Advances in Solidification Processes, University of Leoben (Leoben, AT) 17-20
June 2008
CAFE modelling of segregation and structure in levitated droplets
S. Mosbah, M. Bellet, Ch.-A. Gandin, in Proceedings of the Solidification and Gravity conference, editors
A. Roósz, V. Mertinger, P. Barkóczy, Cs. Hoó, Materials Science Forum 649 (2010) pp. 237-242. Trans Tech
Publications Ltd (Aedermannsdorf, CH)
Conference Solidification and Gravity 2008 (Miskolc, HU) 31 August - 4 September 2008
A microsegregation model for multiple phase transformations - Application to solidification upon atomization of
aluminium-nickel alloys
Journées de l’Ecole Doctorale Sciences Fondamentales et Appliquées (Nice, FR) May 2008
Solidification dirigée d’alliages Al-Si en microgravité et au sol: transition colonnaire-équiaxe et modélisation par
la méthode CAFE
J.E. Spinelli, K. Sabat da Cruz, N. Mangelinck-Noël, B. Billia, H. Nguyen-Thi, G. Zimmermann, L. Sturz,
Ch.-A. Gandin
GDR CNES-CNRS Micropesanteur Fondamentale et Appliquée (Aussois, FR) 1-3 December 2008
2D and 3D finite element simulations of macrosegregation
B. Rivaux, M. Bellet, Ch.-A. Gandin
Journées de l’Ecole Doctorale Sciences Fondamentales et Appliquées (Nice, FR) 14 May 2009
Simulation of solidification grain structures with a multiple diffusion length scales model
January 2013
10/16
CW42
CW43
CW44
CW45
CW46
CW47
CW48
CW49
CW50
CW51
CW52
CW53
CW54
CW55
S. Mosbah, M. Bellet, Ch.-A. Gandin, in Modeling of Casting, Welding and Advanced Solidification
Processes XII, Eds. S. L. Cockcroft, D. M. Maijer, 485-493. TMS (Warrendale, US) 2009
Conference Modeling of Casting, Welding and Advanced Solidification Processes XII (Vancouver, CA) 7-14
June 2009
Microsegregation modeling of multiple phase transformations – Atomization of Al-Ni alloys
D. Tourret, Ch.-A. Gandin, in Modeling of Casting, Welding and Advanced Solidification Processes XII, Eds. S.
L. Cockcroft, D. M. Maijer, 603-611. TMS (Warrendale, US) 2009
Conference Modeling of Casting, Welding and Advanced Solidification Processes XII (Vancouver, CA) 7-14
June 2009
Etude expérimentale et numérique de la structure obtenue par solidification dirigée d’Al-Si 7%pds
K. Sabat da Cruz, N. Mangelinck-Noël, Ch.-A. Gandin, B. Billia
(GDR CNES-CNRS Micropesanteur Fondamentale et Appliquée (Balaruc, FR) 23-25 Novembre 2009
Benchmark sur la simulation des macroségrégations lors de la solidification d’un alliage : première synthèse
H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, M. Rady, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail,
A. Kumar, Ch.-A. Gandin, B. Goyeau, S. Mosbah, M. Založnik (2010) 493-498
Société Française de Thermique 2010 (Le Touquet, FR) 25-28 mai 2010
Numerical simulation of the mushy zone behavior in aluminum alloys
J.-F. Zaragoci, L. Silva, M. Bellet, Ch.-A. Gandin
Prediction of solidification paths for Fe-C-Cr alloys by a multiphase segregation model coupled to
H. Ben Hamouda, H. Zhang, Ch.-A. Gandin, D. Tourret, K. Nakajima, J. He
Modeling and experimental characterization of the microstructure and grain structure of Al-7wt%Si directionally
solidified
K. Sabat da Cruz, N. Mangelinck-Noël, Ch.-A.Gandin, B. Billia
61th International Astronautical Congress 2010 (Praha, CZ) 27 September - 1 October 2010
A numerical benchmark on the prediction of macrosegregation in binary alloys
H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar,
S. Mosbah, T. Quatravaux, M. Rady, Ch.-A. Gandin, B. Goyeau, M. Založnik, 2011. Symposium Frontiers in
Solidification Science, vol. 2, 755-762. Poster presentation
TMS Annual meeting 2011 (San Diego, US) 28 February - 3 March 2011
3D CAFE modeling of grain structures: Application to primary dendritic and secondary eutectic solidification
T. Carozzani, H. Digonnet, Ch.-A. Gandin. Poster presentation
Experimental and numerical analyses of as-cast INCONEL 718
A. Pautrat, M. Bellet, Ch-A. Gandin, E. Renard, D. Cornu.
A method to determine the active particle nucleation undercooling distribution in a refined alloy
N. Mangelinck-Noël, J. E. Spinelli, Ch.-A. Gandin, G. Reinhart, H. Nguyen-Thi, B. Billia, IOP Conf. Series:
Materials Science and Engineering 27 (2011) 012090
3rd International Conference on Advances in Solidification Processes (Rolduc Abbey, NL) 7 - 10 June 2011
Distributions of structures and solute in directionally solidified Al – 7 wt % Si
K. Sabat Da Cruz, N. Mangelinck-Noël, Ch.-A. Gandin, B Billia, IOP Conf. Series: Materials Science and
Engineering 27 (2011) 012017
3rd International Conference on Advances in Solidification Processes (Rolduc Abbey, NL) 7 - 10 June 2011
First analysis of a numerical benchmark for 2d columnar solidification of binary alloys
E. Arquis, M. Bellet, H. Combeau, Y. Fautrelle, D. Gobin, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar,
S. Mosbah, M. Rady, Ch.-A. Gandin, B. Goyeau, M. Založnik, Proc. Steelsim2011, DVD published by the Steel
Institute VDEh (2011) 7 pages
4th Int. Conf. on Modelling and Simulation of Metallurgical Processes in Steelmaking (Düsseldorf, DE) 27 June 1 July 2011
Containerless solidification and characterization of industrial alloys (NEQUISOL)
A. Ilbagi, H. Henein, J. Chen, D. M. Herlach, R. Lengsdorf, Ch.-A. Gandin, D. Tourret, A. Garcia-Escorial,
Journal of Physics: Conference Series 327 (2011) 012007
Non-equilibrium solidification, modelling for microstructure engineering of industrial alloys (NEQUISOL)
January 2013
11/16
CW56
CW57
CW58
CW59
CW60
CW61
CW62
CW63
D. M. Herlach, S. Klein, P. Galenko, Ch.-A. Gandin, D. Tourret, H. Henein, A. Ilbagi, A. Garcia-Escorial,
O. Minster, D. Voss, IAC-11.A2.4.12.
62nd International Astronautical Congress (Cape Town, ZA) 3 - 7 October 2011
Numerical tensile test on a mushy zone sample
J.-F. Zaragoci, L. Silva, M. Bellet, Ch.-A. Gandin, IOP Conf. Series: Materials Science and Engineering 33
(2012) 012054.
17-22 June 2012
Neutron diffraction analysis and solidification modeling of Impulse-Atomized Al-36 wt%Ni
A. Ilbagi, D. Tourret, H. Henein, Ch.-A. Gandin, IOP Conf. Series: Materials Science and Engineering 33 (2012)
012060.
17-22 June 2012
Prediction of solidification path and carbide precipitation in Fe-C-V-Cr-Mo-W high speed steels
H. Zhang, Ch.-A. Gandin, J. He and K. Nakajima, IOP Conf. Series: Materials Science and Engineering 33
(2012) 012061.
17-22 June 2012
Direct simulation of a directional solidification experiment observed in situ and real-time using X-ray imaging
G. Reinhart, Ch.-A. Gandin, N. Mangelinck-Noël, H. Nguyen-Thi, B. Billia, J. Baruchel, IOP Conf. Series:
Materials Science and Engineering 33 (2012) 012077.
17-22 June 2012
3D CAFE simulation of a macrosegregation benchmark experiment
T. Carozzani, H. Digonnet, M. Bellet, Ch.-A. Gandin, IOP Conf. Series: Materials Science and Engineering 33
(2012) 012087.
17-22 June 2012
A multiphase segregation model for multicomponent alloys with a peritectic transformation
H. Zhang, Ch.-A. Gandin, K. Nakajima and J. He, IOP Conf. Series: Materials Science and Engineering 33
(2012) 012063.
17-22 June 2012
Computation of Phase Transformation during Welding Processes
S. Chen, G. Guillemot, Ch-A. Gandin. Poster Presentation.
Quatification of Primary Phase Undercooling of Rapidly Solidified Droplets with 3D Microtomography
A. Ilbagi, P. Delshad Khatibi, H. Henein, Ch.-A. Gandin, D. M. Herlach. Wiley, ISBN: 978-1-1184-7039-8.
1st International Conference on 3D Materials Science (Seven Springs, US) 8-12 July 2012
Communications without proceedings
CO1
CO2
CO3
CO4
3-D modelling of microstructure formation in solidification processes
Ch. Charbon, Ch.-A. Gandin, M. Rappaz, Junior-Euromat, 125
(Lausanne, CH) 1992
Probabilistic modelling of microstructure formation -application to superalloy precision castingsCh.-A. Gandin, M. Rappaz, R. Tintillier, Eurotherm, 53
(Paris, FR) 1992
Etude expérimentale et modélisation de la solidification initiale des aciers
L. Ladeuille, Ch.-A. Gandin, G. Lesoult, Journées d'Automne de la SF2M, 172. Poster presentation
(Paris, FR) 20 October 2001
Solidification modeling of atomized droplets
A. Prasad, R. Heringer-Ferreira, Ch.-A. Gandin, H. Henein, TMS conference
(Seattle, US) 18-22 February 2002
January 2013
12/16
CO5
CO6
CO7
CO8
CO9
CO10
CO11
CO12
CO13
CO14
CO15
CO16
CO17
CO18
CO19
CO20
CO21
CO22
Modelling of precipitation coupled with thermodynamic calculations
M. Serrière, Ch.-A. Gandin, P. Archambault, E. Gautier, M. Dehmas
VIR[*] Conference, CORUS (Ijmuiden, NL) 8-12 April 2002
Heat and solute flow modelling during droplet solidification
R. Heringer, Ch.-A. Gandin, G. Lesoult, Poster presentation
Euromat 2003 Conference (Lausanne, CH) 1-5 September 2003
Modélisation de la précipitation au cours d'un traitement industriel d'homogénéisation dans un alliage
d'aluminium 3003
M. Serrière, Ch.-A. Gandin, M. Dehmas, E. Aeby-Gautier, P. Archambault
Journées de la Fédération Française des Matériaux (Limoges, FR) 26-28 Octobre 2004
experimental study and modelling of phase transformation in 3003 aluminium alloys during homogenisation
M. Dehmas, M. Serrière, P. Archambault, E. Aeby-Gautier, Ch.-A. Gandin
2005 TMS Annual Meeting and Exhibition (San Francisco, US) 13-17 February 2005
Modélisation des structures en mise en forme par solidification
Ch.-A. Gandin, B. Amarouchene
Rencontre Nationale Jeunes Chercheurs ANR (Nantes, FR) 17-18 April 2007
Special dynamic allocation memory techniques for a three-dimensional Cellular Automaton – Finite Element
model
B. Amarouchene, Ch.-A. Gandin
EUROMAT 2007, « Solidification processes, microstructures and defects » (Nürnberg, DE) 10-13 September
2007
Non-equilibrium solidification for quantitative microstructure engineering of Ni and Al alloys
H. Henein, D. M. Herlach, Ch.-A. Gandin, A. Garcia-Escorial. Poster presentation
Canadian Space Agency, Life and Physical Science Workshop (St Hubert, CA) 3-5 March 2008
Non-equilibrium solidification for quantitative microstructure engineering of Ni and Al alloys
H. Henein, J. Chen, A. Ilbagi, D.M. Herlach, Ch.-A. Gandin, A. Garcia-Escorial. Poster presentation
University of Alberta Space Exploration Symposium (Edmonton, CA) 26-27 September 2008
Modeling microsegregation for multiple phase transformations
Conference EUROMAT (Glasgow, GB) 7-10 September 2009
3D-modelling of macrosegregation during solidification of metallic alloy
B. Rivaux, H. W. Zhang, M. Bellet, Ch.-A. Gandin
Study of Ni-Al powders using synchrotron x-ray microtomography
G. Reinhart, G. N. Iles, Ch.-A. Gandin, E. Boller
Multiscale solidification modeling of EML processed samples
Ch.-A. Gandin
International Topical Team SOL-EML meeting (Köln, DE) 9 July 2010
Multiple reactions solidification of undercooled melt - Experiments vs Simulation applied to Al-Ni alloys
D. Tourret, Th. Volkmann, D. M. Herlach, Ch.-A. Gandin. Poster presentation.
Best poster award.
Conference Materials Science and Engineering (Darmstadt, DE) 24-28 August 2010
Simulation of nickel-base superalloys microstructure
L. Rougier, M. Rappaz, Ch.-A. Gandin, A. Jacot, P.-Y. Théry
Journées thèses SAFRAN, Snecma (Villaroche, FR) 8-10 novembre 2010
Stray grains in AM1
H. Ben Hamouda, Ch.-A. Gandin, F. Tievant, V. Jaquet
Modeling and experimental solidification studies of as-cast Inconel 718
A. Pautrat, Ch.-A. Gandin, M. Bellet, D. Cornu, R. Salapete, E. Renard
Competition between primary solidification structures
Ch.-A. Gandin
Norwegian University of Science and Technology (Trondheim, NO) 18 January 2011
Multicomponent segregation path with solid and liquid diffusion coupled with thermodynamic equilibrium
calculations
January 2013
13/16
CO23
CO24
CO25
CO26
CO27
CO28
CO29
CO30
CO31
CO32
CO33
CO34
Ch.-A. Gandin, H. Ben Hamouda, H. Zhang, D. Tourret. Poster presentation
Parallel developments of a cellular automaton - finite element model for the prediction of grain structure in
casting
T. Carozzani, Ch.-A. Gandin, H. Digonnet. Poster presentation
Numerical simulation of microstructures formation during solidification and heat treatement of ni base
superalloys.
L. Rougier, A. Jacot, Ch.-A. Gandin, M. Rappaz. Poster presentation
EDMX (Lausanne, CH) 11 March 2011
Numerical modelling of tensile testing in the mushy state based on an in situ and real-time 3D X-ray
microtomography
J.-F. Zaragoci, L. Silva, M. Bellet, Ch.-A. Gandin
Journées Thématiques MECAMAT (Sophia Antipolis, FR) 10-11 mai 2011
Chill cooling for the electromagnetic levitator in relation with continuous casting
Ch.-A. Gandin, B. Rivaux, M. Bellet, D. Herlach, T. Volkmann, N. Johannsen, M. Bobadilla, N. Bontems
Multiscale modeling of dendritic solidification for multicomponent nickel-base alloys
H. Ben Hamouda, Ch.-A. Gandin, F. Tievant. Poster presentation.
Simulation of spherulite structure in high pressure polymer crystallization based on three dimensional cellular
automaton - finite element modeling
S.A.E. Boyer, T. Carozzani, H. Digonnet, Ch.-A. Gandin
Multiple phase transformations during metallic alloy solidification simulations vs. measurements
D. Tourret, Ch.-A. Gandin, T. Volkmann, D. Herlach, G. Reinhart, G. N. Iles, M. Calvo-Dahlborg, U. Dahlborg,
C. M. Bao. Poster presentation
Numerical modelling of tensile testing in the mushy state based on an in situ and real-time 3D Xray
microtomography
J.-F. Zaragoci, L. Rocha Da Silva, M. Bellet, Ch.-A. Gandin
Microstructure and microsegregation formation during directional solidification of the AM1 Nickel-based
superalloy
J. Zollinger, D. Daloz, H. Ben Hamouda, Ch.-A. Gandin, F. Tievant. Poster presentation
Microstructure and Microsegregation in Inconel 718 Casting
Alexis Pautrat, Charles André Gandin, Michel Bellet, Daniel Cornu, Emelyne Renard
Symposium « Defects and Properties of Cast Metals », 2012 TMS Annual Meeting & Exhibition (Orlando, US)
11-15 March 2012
Model experiments for high cooling rate and high pressure crystallization
S.A.E. Boyer, F. Fournier, J.-M. Haudin, Ch.-A. Gandin
Conference PPS (Niagara Falls, CA) 21-24 May 2012
Numerical and Experimental Studies of the Grain Morphological Transitions and Macrosegregation in the
Sedimentation Cone of an Industrial Steel Ingot
Leriche Nicolas; Kumar Arvind; Combeau Herve; Zaloznik Miha; Demurger Joelle; Wendenbaum
Jean; Gandin Charles-André
Symposium « Frontiers in Solidification Science », 2013 TMS Annual Meeting & Exhibition (San Antonio, US)
3-7 March 2013
CO35
CO36
A Newly Designed Experiment for High-Pressure Solidification of Transparent Materials
Severine Boyer; Charles-Andre Gandin; Jean-Marc Haudin
Symposium « Frontiers in Solidification Science », 2013 TMS Annual Meeting & Exhibition (San Antonio, US)
3-7 March 2013
Non-Equilibrium Solidification, Modeling for Microstructure Engineering of Industrial Alloys (NEQUISOL)
Dieter Herlach; Jan Gegner; Charles-André Gandin; Damien Tourret; Hani Henein; Asuncion GarciaEscorial; Gerd-Ulrich Grün; Marc Schneider
Symposium « Materials Science in Reduced Gravity », 2013 TMS Annual Meeting & Exhibition (San Antonio,
January 2013
14/16
US) 3-7 March 2013
Book Chapters
BC1
BC2
BC3
BC4
BC5
BC6
BC7
BC8
BC9
Micro-macroscopic Modeling of Solidification
Ph. Thévoz, Ch.-A. Gandin, Encyclopedia of Materials: Science and Technology, Elsevier (Oxford, GB) 2001
Modeling of dendritic grain formation during solidification at the level of macro- and microstructures
M. Rappaz, A. Jacot, Ch.-A. Gandin, in Continuum Scale Simulation of Engineering Materials: Fundamentals Microstructures - Process Applications, editors D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, Wiley-VCH
(Weinheim, DE) 2004, pp. 251-267
Modeling of heat and solute flows during solidification of droplets
R. Heringer, Ch.-A. Gandin, G. Lesoult, H. Henein, in Solidification and Crystallization, editor D. M. Herlach,
Wiley-VCH (Weinheim, DE) 2004, pp. 70-81
Direct modeling of structure formation
Ch.-A. Gandin, I. Steinbach, in Casting, ASM (Materials Park, US) editor S. Viswanathan, Handbook 15 (2008)
435-444
Direct modeling of structure formation
Ch.-A. Gandin, I. Steinbach, in Fundamentals of Modeling for Metals Processing, ASM (Materials Park, US)
editors D. U. Furrer, S. L. Semiatin, Handbook 22A (2010) 312-322
Modeling of dendritic grain solidification
Ch.-A. Gandin, A. Jacot, in Metals Process Simulation, ASM (Materials Park, US) editors D. U. Furrer, S. L.
Semiatin, Handbook 22B (2010) 228-239
Formation of microstructures, grain textures, and defects during solidification
A. Jacot, Ch.-A. Gandin, in Metals Process Simulation, ASM (Materials Park, US) editors D. U. Furrer, S. L.
Semiatin, Handbook 22B (2010) 214-227
Quantitative analysis of alloy structures solidified under limited diffusion conditions
H. Henein, A. Ilbagi, Ch.-A. Gandin, in Solidification of Containerless Undercooled Melts, Wiley-VCH
(Weinheim, DE) editors D. M. Herlach, D. M. Matson (2012) ISBN: 978-3-527-33122-2
Solidification modeling: from electromagnetic levitation to atomization processing
Ch.-A. Gandin, D. Tourret, T. Volkmann, D. M. Herlach, A. Ilbagi, H. Henein in Solidification of Containerless
Undercooled Melts, Wiley-VCH (Weinheim, DE) editors D. M. Herlach, D. M. Matson (2012) ISBN: 978-3-52733122-2
Other articles
OA1
OA2
OA3
OA4
OA5
Stochastic modeling of grain structure formation in solidification processes
M. Rappaz, Ch.-A. Gandin
MRS Bulletin XIX (1994) 20
Simulation tridimensionnelle de la Formation des Grains en Fonderie à Cire Perdue
Ch.-A. Gandin, M. Rappaz, R. Tintillier
Revue Scientifique SNECMA 6 (1995) 31
3D modelling of grain structure formation during solidification
Ch.-A. Gandin, J.-L. Desbiolles, M. Rappaz, M. Swierkosz, Ph. Thévoz
Supercomputing Review 8 (1996) 11
Coulage simulé
Science & Vie (1999) 138
Materials solidification physics in space
L. Ratke, Ch.-A. Gandin, R. H. Mathiesen, M.Rappaz, S. Rex
Europhysics News 39 (2008) 22-24
January 2013
15/16
January 2013
16/16

List of publications

Transcription

Documents pareils

Solidification de l`eau

Chapitre 5: Fusion et solidification

Les changements d`états

Chapitre 7 Etude des changements d`état de l`eau

SOLIDIFICATION et FUSION 1. Solidification de l`eau pure

Evaluation : le cycle de l`eau dans la nature

Résultats 2014

curiculum vitae - Darkarch - Delbaer Nicolas - 3D Artist