HO Plan 7 - Kato USA
Transcription
HO Plan 7 - Kato USA
HO Plan 7 Insulated Unijoiners here S369 R670 X4 S369 RH #6 X2 R670 X4 S369 S369 R670 S246F X2 R490 S246 S174 R490 X8 S94 Manual Right S94 R490 X8 R490 X8 S123+S60+R550 S246 X 2 S114 S369 X 3 Manual Left Bumper R670 X4 S369 R490 Manual Right S227 Manual Left S227 S114 Bumper R490 R670 X4 Manual Left All blue pieces S227 here S369 (12) S114 S246 S114 S60 R730 Manual Right Now this could be some serious Color in model railroading! As drawn, the layout Item #: Description: Qty: plan is approximately 6’-3” wide by 13’-0” #3-103 HO UNITRACK WGH Plan Set 1 set green long. An overall table size of at least #2-105 60mm Straight Track 2 pcs pink 7’-0” X 15’-0” is recommended. #2-111 94mm Straight Track 2 pcs yellow This plan uses the #3-103 WGH #2-120 114mm Straight Track 4 pcs gray Plan Set as its core and is expanded #2-151 246mm Feeder Track 1 pc gray for two train operation. Freight service #2-160 227mm Straight Track 3 pcs orange could be operated on the outside oval #2-180 369mm Straight Track 20 pcs light blue while an intercity commuter train could #2-210 R550-22.5 Curved Track 1 pc gray run on the inside oval. #2-230 R670-22.5 Curved Track 17 pcs orange It is important to note the insertion #2-240 R730-22.5 Curved Track 1 pc gray of #24-816 Insulated Unijoiners, #2-503 DC Turnout Machine Left 3 pcs required to prevent short circuit, at the #2-504 DC Turnout Machine Right 3 pcs juncture of back-to-back turnouts used #2-840 Left Manual Turnout 1 pc gray as crossovers. #2-841 Right Manual Turnout 1 pc gray The Feeder Tracks are identified #2-861 Electric Turnout #6 Right 2 sets gray in the plan as S246F. Using (2) of the #22-014 KATO Power Pack (suggested) 2 each #22-014 KATO Power Packs would be #24-816 Insulated Unijoiners 2 pcs ideal for quick plug-in of the Feeder #24-840 Turnout Control Switch 6 pcs Track cords. (If using power pack by #24-842 DC Converter 2 pcs other manufacturer, #24-843 Adapter Cord should be used to connect Feeder Track to power pack.) Using the KATO Power Packs would also eliminate the need for the #24-842 DC Converters. Use a #24-840 Turnout Control Switch to electrically operate each turnout from a central command location. You will need to install a #2-503/504 DC Turnout Machine to each Manual Turnout to operate it electrically. If you are using a power pack by another manufacturer, use one (1) #24-842 DC Converter is required for each “group” of control switches. See package instructions for proper connection and operation. #24-841 Turnout Extension Cords may also be required. KATO News #92, Plan 7 br090104