Assembly Instructions - Northern Lights Fitness Equipment
Transcription
Assembly Instructions - Northern Lights Fitness Equipment
LEG PRESS/HACK SQUAT ASSEMBLY INSTRUCTIONS Specifications Weight = 338 lbs Packed in 4 Boxes Box 1 = 53" x 25" x 5.5" = 4.22 ft³ = 85 lbs Box 2 = 74.5" x 12.25" x 6.25" = 3.30 ft³ = 101 lbs Box 3 = 31.5" x 31.5" x 9.75" = 5.60 ft³ = 76 lbs Box 4 = 30" x 25" x 3.75" = 1.63 ft³ = 76 lbs LEG PRESS/HACK SQUAT NL-LPHS Overall Dimensions: 82. 5" L x 35.5" W x 54" H December 04, 2008 Parts list Item Description ........................... Qty....... Box # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Base Side ....................... 2 .......... 2 Base Rear ....................... 1 .......... 1 Base Front....................... 1 .......... 1 Lower Plate ..................... 1 .......... 4 Adjustment Tube ............. 1 .......... 1 Adjustment Shaft ............. 1 .......... 4 Side Rail .......................... 2 .......... 2 Dead Stop ....................... 2 .......... 1 Seat Spacer .................... 2 .......... 1 Seat Pad ......................... 1 .......... 1 Carriage........................... 1 .......... 3 Weight Support ............... 1 .......... 3 Large Wheel Assy ........... 4 ...... Bag 2 Small Wheel .................... 4 ...... Bag 2 Wheel Bracket ................. 2 .......... 1 Lock Bar Right Hand ....... 1 .......... 1 Lock Bar Support ............ 2 .......... 1 Rear Support ................... 1 .......... 1 Shoulder Tube ................. 2 .......... 3 Shoulder Pad .................. 2 .......... 1 Upper Plate ..................... 1 .......... 4 Seat Bracket .................... 1 .......... 1 Back Rest ........................ 1 .......... 1 Tee Bracket ..................... 2 .......... 1 Lock bar Left Hand .......... 1 .......... 1 Lot Label ............................1 Bolt Bag #1 is packed in Box #3. Note: Pre-assembled to each large wheel(13) are: -1 Bolt (1/2" x 5") -1 Nut (1/2") -3 Washers (1/2") Bag #2 is packed in Box #3. -2- Item Description ........................... Qty .. Bag # A B C D F G H I J K L M N O Nut 3/8" .......................... 26 ....... 1 Nut 1/2" .......................... 14 ....... 1 Washer 3/8" ................... 50 ....... 1 Washer 1/2" ................... 26 ....... 1 Bolt 3/8" x 1".................... 2 ........ 1 Bolt 3/8" x 1 1/4" ............. 6 ........ 1 Bolt 3/8" x 1 3/4" ............. 6 ........ 1 Bolt 3/8" x 3"................... 16 ....... 1 Bolt 3/8" x 4".................... 4 ........ 1 Bolt 1/2" x 1 1/2" ............. 2 ........ 1 Bolt 1/2" x 3".................... 4 ........ 1 Bolt 1/2" x 3 1/4" ............. 2 ........ 1 Bolt 1/2" x 3 1/2" ............. 2 ........ 1 Bolt 1/2" x 4".................... 4 ........ 1 X Z Rubber grip 1" x 8" .......... 2 ........ 1 Plastic cap 2" x 2" .......... 10 ....... 1 Bolt Length 14 12 18 13 11 19 15 26 17 24 20 2 23 25 16 21 9 8 4 10 7 6 1 3 5 22 -3- Parts Required For This Page: 7 1 2 3 4 5 6 7 A B C D I J N O Z Base Side ............................................ 2 Base Rear ........................................... 1 Base Front ........................................... 1 Lower Plate .......................................... 1 Adjustment Tube ................................. 1 Adjustment Shaft ................................. 1 Side Rail .............................................. 2 3/8" Locknut ........................................ 10 1/2" Locknut ........................................ 4 3/8" Plate Washer ............................... 20 1/2" Plate Washer ............................... 8 3/8" x 3" Bolt ....................................... 8 3/8" x 4" Bolt ....................................... 2 1/2" x 3 1/2" Bolt ................................. 2 1/2" x 4" Bolt ....................................... 2 2" Plastic Cap (Internal) ....................... 4 7 2 1 4 1 7 5 7 3 Z 4 Places 2 A 10 Places J 1 J C I 20 Places 5 8 Places 1 4 O B D O 6 D B D N B D N -4- 3 D B Parts Required For This Page: 8 9 10 16 17 22 23 25 A C F G H X Dead Stop............................................ 2 Seat Spacer ......................................... 2 Seat Pad ............................................. 1 Lock Bar Right Hand ........................... 1 Lock Bar Support ................................. 2 Seat Bracket ....................................... 1 Back Rest ............................................ 1 Lock Bar Left Hand .............................. 1 3/8" Locknut ........................................ 6 3/8" Plate Washer ............................... 10 3/8" x 1" Bolt ....................................... 2 3/8" x 1 1/4" Bolt ................................. 6 3/8" x 1 3/4" Bolt ................................. 2 Rubber Grip 1" x 8" .............................. 2 Grips slide on easiest when a solution of soapy water is first applied to the bar. This will dry in a short time and causes no damage to the machine. Do NOT use any other lubricant. 17 25 17 16 23 10 8 17 G 17 6 Places C C 25 8 A 22 G 6 Places F X 8 23 16 X 10 9 9 C H -5- Parts Required For This Page: 11 12 13 14 15 A B C D H L O Z Carriage ............................................... 1 Weight Support .................................... 1 Large Wheel Assembly ....................... 4 Small Wheel ........................................ 4 Wheel Bracket ..................................... 2 3/8" Locknut ........................................ 4 1/2" Locknut ........................................ 6 3/8" Plate Washer ............................... 4 1/2" Plate Washer ............................... 12 3/8" x 1 3/4" Bolt ................................. 4 1/2" x 3" Bolt ....................................... 4 1/2" x 4" Bolt ....................................... 2 2" Plastic Cap (Internal) ....................... 4 Assemble all parts, as shown. Attach, but do not tighten, Wheel Brackets(15) to Carriage(11) until a later step. O L 13 H D 13 D H C C D 14 14 A D 15 B 11 L L A D B D H 12 L C H C 14 14 A 15 13 D A 13 B Z 4 Places -6- Parts Required For This Page: 11 18 19 20 21 24 A B C D I J K M Z Carriage Assy (See page 6) ................. 1 Rear Support ....................................... 1 Shoulder Tube ...................................... 2 Shoulder Pad ....................................... 2 Upper Plate .......................................... 1 Tee Bracket ......................................... 2 3/8" Locknut ........................................ 6 1/2" Locknut ........................................ 4 3/8" Plate Washer ............................... 16 1/2" Plate Washer ............................... 6 3/8" x 3" Bolt ....................................... 8 3/8" x 4" Bolt ....................................... 2 1/2" x 1 1/2" Bolt ................................. 2 1/2" x 3 1/4" Bolt ................................. 2 2" Plastic Cap (Internal) ....................... 2 19 20 21 18 24 Slide Carriage Assy(11) into Side Rails(7). 11 18 You may now extend the Wheel Brackets(15) into the Side Rails(7) to prevent side to side movement of the Carriage, secure tightly. J J Check all bolt tightness before using. 7 12 Places C 11 A 6 Places 7 I 4 Places 15 C 4 Places 19 2 Places M Z 2 Places 20 2 Places 15 K 2 Places 6 Places D 4 Places B 21 24 I Weight of the complete Carriage assembly is 90 lbs. -7- 4 Places NORTHERN LIGHTS FITNESS PRODUCTS INC. NORTHERN LIGHTS FITNESS PRODUCTS INC. Cher Client: Dear Customer: Thank you for selecting Northern Lights Exercise Equipment. We hope that you will enjoy and benefit from your new fitness product for years to come. If you have any questions regarding your new equipment or would like to find out what other products are available to add to your workout, feel free to contact the authorized Northern Lights showroom in your area. Merci d’avoir sélectionneé un produit Northern Lights. Nous espérons que vous aimerez et bénéficierez de votre nouveau produit pour des années à venir. Si vous avez des questions concernant votre nouveau produit ou si vous aimeriez trouver d’autres produits disponible de Northern Lights, contactez un détaillant autorisé Northern Lights. WARRANTY La GARANTIE Manufacturer’s Limited Lifetime Warranty Garantie à Vie Limitée du Fabricant Northern Lights Fitness Products Inc. offers its customers a lifetime warranty against broken welds and manufacturer defects on all products. Simply return the defective part, insured and prepaid to Northern Lights and we will replace it at no charge. Northern Lights Fitness Products Inc. offre à ses clients une garantie à vie contre toutes soudures casées et contre tout défaut de matériau et de fabrication dans le cadre d’un entretien soigneux et d’une utilisation conforme à l’usage prévu réalisée dans des conditions normales. Simplement, retrournez la pièce défectueuse à Northern Lights, payé et ensuré, et nous la remplacerons sans frais. This warranty is for original product owners and does not cover damage resulting from product alterations, misuse, abuse, improper assembly, normal wear and tear or other conditions, which are beyond our control. No other express warranty has been made or will be made on behalf of Northern Lights with respect to any Northern Lights product or the operation, repair or replacement of any Northern Lights product. Northern Lights shall not be responsible for injury, loss of use of the product, inconvenience, loss or damage to personal property, whether direct or indirect. This warranty does not include any implied warranties or liability for incidental or consequential damages created by any provincial or state law. If you feel that a Northern Lights product is defective, please contact our parts department at (800) 461-1709. Cette garantie s’étend uniquement au propriétraire d’origine seulement et n’est pas transferable. Elle ne couvre pas les produits soumis à une mauvaise utilisation, à un manque de soins, à des accidents, à des réparations ou à des modifications non autorisées. Aucune autre garantie n’a été faite ou sera faite de la part de Northern Lights en ce qui concerne tout produit de Northern Lights ou son opération, réparation ou échange. Northern Lights ne sera pas responsable pour blessure, perte d’usage du produit, dérangement, perte ou dommage de propriété personnelle, direct ou indirect. Cette garantie n’inclut pas toutes autres garanties implicites pour incidents ou dommages conséquents créés par les lois provincial ou les lois d’état. Si un produit de Northern Lights est défectueux, s’il vous plaît contactez notre département de Pièces et Service au (800) 461-1709. IMPORTANT IMPORTANT Be sure to have all pull-pins locked and tightened in place, BEFORE using your equipment. Etre sûr d’avoir toutes les forceépingles fermées à clef et resserrées à sa place, avant d’utiliser votre équipement.