Assembly Instructions - Northern Lights Fitness Equipment
Transcription
Assembly Instructions - Northern Lights Fitness Equipment
NL-LATP ASSEMBLY INSTRUCTIONS Lat Machine, Plate Loaded NL-LATP Overall Dimensions: 47.5" L x 48" W x 82.813" H September 26, 2012 Specifications Weight = 75.5 lbs Packed in 1 Box Box 1 = 76" x 16.25" x 6" = 4.29 ft³ Parts list Item Description ................................ Qty .... Bag # Item Description ........................... Qty... Bag # AU AV Lat Top Cable ............................... 1 .......... 2 Low Cable ..................................... 1 .......... 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Base ............................................. 1 Rear Upright .................................. 1 Rear Base ..................................... 1 Main Upright .................................. 1 Top Tube ....................................... 1 Knee Support Tube ....................... 1 Plate Holder .................................. 1 48" Lat Bar 15° .............................. 1 Foot Plate ..................................... 1 3.5" Floating Pulley Bracket ........... 2 18" Straight Bar ............................. 1 Lat Bar Hooks R&L ....................... 2 Seat Pad ....................................... 1 Foam Roller................................... 2 Lot Label........................................ ... 1 A B C D E F G 3/8" x 1" Bolt ............................. 2 .......... 1 3/8" x 1-3/4" Bolt ....................... 2 .......... 1 3/8" x 2-3/4" Bolt ....................... 7 .......... 1 3/8" x 3" Bolt ............................. 8 .......... 1 3/8" x 3-1/4" Bolt ....................... 2 .......... 1 3/8" Locknut ............................ 19 ......... 1 3/8" Plate Washer ................... 32 ......... 1 AA AB AC AF AG AH Nylon Spacer 3/8" x 1/4" lg ....... 2 .......... 1 Nylon Spacer 3/8" x 1/2" lg ...... 10 ......... 1 1" Rd Plastic Cap Oversize ...... 2 .......... 2 Rubber Cushion 2-1/2"x2-1/2" .. 1 .......... 2 22" Chain Assembly ................. 1 .......... 2 3-1/2" Pulley ............................. 7 .......... 2 Bolt Length -2- 5 8 12 2 10 AH 4 7 6 14 13 AF 1 3 15 11 AG 9 -3- G Typical AA 1. S lide Rubber Cushion 21/2" x 2-1/2" (AF) & Plate Holder (7) onto Rear Upright (2). 5 2. Bolt Rear Upright (2) & Base (1) to Rear Base (3) using bolting shown. C D 3. Bolt Foot Plate (9) to Base (1) using bolting shown. 4 4. Bolt Main Upright (4) to Base (1) using bolting shown. 2 5. Bolt Top Tube (5) to Main Upright (4) and Rear Upright (2) using two Nylon Spacers (AA) & bolting shown. AU AC 7 D 14 AF 6 6. Insert Knee Support Tube(6) into Main Upright (4) , slide both Foam Rollers on the tube, press in two 1" Round Plastic Caps (AC) at each end of the tube to secure the rollers. 13 7. Install Seat Pad (13) to Base (1) using bolting shown. E 1 3 F Typical D A 9 -4- AU 8. Start the installation of the Lat Top Cable (AU) at the front 3-1/2" Pulley (AH) and Lat Bar Hooks R&L (12) using bolting and Nylon Spacers 3/8"x1/2 lg" (AB) as shown. 9. Continue installing Lat Top Cable and 3-1/2" Pulleys in order until all upper pulleys have been installed. Cable must be positioned on the pulley and then bolted in place using bolting and Nylon Spacers 3/8"x1/2" lg (AB) as shown. 10. Loosely bolt the two Floating Pulley Brackets (10) to one 3-1/2" Pulley (AH) and Lat Top Cable (AU) together as shown below. After Low Cable (AV) has been installed, complete the Floating Pulley Brackets connection with Lat Top Cable (AU) as shown and tighten both bolts on floating pulley. AV G AB AB F 12 L C AU B D 10 12 R AH AV -5- 7 AB G F AB C AV AH Tie-Off C 11. Start installation of the Low Cable (AV) at the front 3-1/2" Pulley (AH) using two Nylon Spacers 3/8" x 1/2" (AB) and bolting shown. 12. Continue installing Low Cable (AV) and 3-1/2" Pulleys (AH) in order untill all Pulleys have been installed and tie-off to Base is complete using bolting and two Nylon Spacers 3/8" x 1/2" (AB) as shown. 13. Complete connection between Lat Top Cable (AU) and Low Cable (AV) as shown on Page 5. 14. Complete installation of Lat Top Cable (AU) by threading the end of the cable into the Plate Holder (7) until slackness in the cables is removed. Tighten the jam nut against the Plate Holder. Periodic cable tightening may be required. Cables are a consumable and must be treated as such. As a minimum, an annual inspection must be performed on all cable ends and full lengths. A cable must be replaced immediately if broken exposed wires and/or a break in cable coating are found. -6- NORTHERN LIGHTS FITNESS PRODUCTS INC. NORTHERN LIGHTS FITNESS PRODUCTS INC. Cher Client: Dear Customer: Thank you for selecting Northern Lights Exercise Equipment. We hope that you will enjoy and benefit from your new fitness product for years to come. If you have any questions regarding your new equipment or would like to find out what other products are available to add to your workout, feel free to contact the authorized Northern Lights showroom in your area. Merci d’avoir sélectionneé un produit Northern Lights. Nous espérons que vous aimerez et bénéficierez de votre nouveau produit pour des années à venir. Si vous avez des questions concernant votre nouveau produit ou si vous aimeriez trouver d’autres produits disponible de Northern Lights, contactez un détaillant autorisé Northern Lights. WARRANTY La GARANTIE Manufacturer’s Limited Lifetime Warranty Garantie à Vie Limitée du Fabricant Northern Lights Fitness Products Inc. offers its customers a lifetime warranty against broken welds and manufacturer defects on all products. Simply return the defective part, insured and prepaid to Northern Lights and we will replace it at no charge. Northern Lights Fitness Products Inc. offre à ses clients une garantie à vie contre toutes soudures casées et contre tout défaut de matériau et de fabrication dans le cadre d’un entretien soigneux et d’une utilisation conforme à l’usage prévu réalisée dans des conditions normales. Simplement, retrournez la pièce défectueuse à Northern Lights, payé et ensuré, et nous la remplacerons sans frais. This warranty is for original product owners and does not cover damage resulting from product alterations, misuse, abuse, improper assembly, normal wear and tear or other conditions, which are beyond our control. No other express warranty has been made or will be made on behalf of Northern Lights with respect to any Northern Lights product or the operation, repair or replacement of any Northern Lights product. Northern Lights shall not be responsible for injury, loss of use of the product, inconvenience, loss or damage to personal property, whether direct or indirect. This warranty does not include any implied warranties or liability for incidental or consequential damages created by any provincial or state law. If you feel that a Northern Lights product is defective, please contact our parts department at (800) 461-1709. Cette garantie s’étend uniquement au propriétraire d’origine seulement et n’est pas transferable. Elle ne couvre pas les produits soumis à une mauvaise utilisation, à un manque de soins, à des accidents, à des réparations ou à des modifications non autorisées. Aucune autre garantie n’a été faite ou sera faite de la part de Northern Lights en ce qui concerne tout produit de Northern Lights ou son opération, réparation ou échange. Northern Lights ne sera pas responsable pour blessure, perte d’usage du produit, dérangement, perte ou dommage de propriété personnelle, direct ou indirect. Cette garantie n’inclut pas toutes autres garanties implicites pour incidents ou dommages conséquents créés par les lois provincial ou les lois d’état. Si un produit de Northern Lights est défectueux, s’il vous plaît contactez notre département de Pièces et Service au (800) 461-1709.