technical acceptance certificate

TECHNICAL ACCEPTANCE CERTIFICATE
THE FOLLOWING EQUIPMENT HAS BEEN TESTED AND CERTIFIED UNDER
INDUSTRY CANADA
Issued By:
Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204 USA
Equipment Certification is hereby issued to the Identified Certificate Holder and is VALID ONLY for the equipment identified herein.
La certification du matériel est distribuée à la Société identifiée et est VALIDE SEULEMENT pour l’équipement identifié ci-dessous.
NOT TRANSFERABLE / PAS TRANSMISSIBLE
Date of Issue: 3/9/2016
Type of Certification: New Single
Issued To / Délivré a: TASER International, Inc.
17800 N. 85th Street
Scottsdale, Arizona 85225
Certification No. / No. De Certification:
8803A-S01000A
Type of Equipment/ Type De Matériel:
Bluetooth Device
Model Number / Modele:
T00378
Frequency Range / Band de Fréquences:
2408MHz - 2480MHz
Emission Designator / Designation Démission:
F1D, F7D
RF Power Rating / Puissance Nominale H.F.:
0.001
Antenna Information / L’information D’antenne:
1.5dBi
Test Laboratory / Laboratoire D’essai: Compliance Testing, LLC
IC Site # / Numéro De Site: 2044A-2
Certified to Specification / Certifie Selon Le Cahier Des Charges: RSS-247
Certification Notes: Power Output listed in Conducted. This device can be used in mobile / portable configurations.
Certified By: Shawn McMillen
Signature: ________________
Certification of equipment means only that the equipment met the requirements of the above noted specification(s). License applications, where applicable to use certified
equipment, are acted on accordingly by the issuing office and will depend on the existing radio environment, service and location of operation. This certificate is issued on
condition that the holder complies and will continue to comply with requirements and procedures issued by Industry Canada.
La certification du matériel signifie seulement que le matériel a satisfait aux exigences de la norme indiquée ci-dessus. Les demandes de licence nécessaires pour l’utilisation
du matériel certifié sont traitées en conséquence par le bureau de délivrance et dépendent des conditions radio ambiantes, du service et de l’emplacement d’exploration. Le
présent certifcat est délivré à la condition que le titulaire satisfassee et continue de satisfaire aux exigences et aux procédures d’Industrie Canada
Reference No./ No. De Référence: p1620001
Create: JS-MS
Updated: 5/1/2014
Form: CB-760 IC Technical Acceptance Certificate
L:\Project\2016\p1620004-Taser Int\TCB Folder\Grant Docs\CB-760 IC Technical Acceptance Certificate.docx
Rev 3