Comportement dynamique des transmissions de puissance par

Bibliographie
[Abrate, 1986] - Abrate, S., "Noise and Vibration in Power Transmission Belts", SAE
Transaction 860428 (Society of Automotive Engineers), 1986, pp. 1028-1037.
[Abrate, 1992] - Abrate, S., "Vibrations of Belts ans Belt Drives", Mech. Mach. Theor,
1992, Vol.27, N°6, pp. 645-649.
[Alspaugh, 1967] - Alspaugh, D. W., "Torsionel Vibration of a Moving Band", Journal
of Franklin Institute, 1967, Vol. 283, N° 4, pp. 328-338.
[Atouf, 1992] - Atouf, M., " Étude du Comportement Mécanique des Dentures de
Courroies Synchrones: Application aux Courroies de type H.T.D.", thèse de doctorat, déc.
1992, no 92 ISAL 0063, INSA de Lyon, 209 pages.
[Auto-Concept, 1996] - Auto Concept, sept.-oct.. 1996, pp 20-24.
[Auto-Plus, 1996] - "Courroie de distribution : le grand fléau.", Auto Plus, janv. 1996,
n° 384, pp 32-34.
[Banaszek et al., 1993] - Banaszek, G., Wittbrodt, E., Esat, "Dynamic Behaviour of
Belt Driven Gears", International Conference FEMCAD CRASH, Paris, June 1993, pp. 105119.
[Beikmann, 1992] - Beikmann, R. S., "Static and Dynamic Behavior of Serpentine Belt
Drive Systems : Theory and Experiment.", The University of Michigan, Ph. D., Order Number
DA9308273, 1992, 173 s.
[Beikmann et al., 1996 (a)] - Beikmann, R. S., Perkins, N. C., Ulsoy, A. G., "Free
Vibration of Serpentine Drive Systems", Journal of Vibration and Acoustics, 1996, Vol. 118,
No 3, pp. 406-413.
[Beikmann et al., 1996 (b)] - Beikmann, R. S., Perkins, N. C., Ulsoy, A. G., "Nonlinear
Coupled Vibration Response of Serpentine Belt Drive Systems.", Journal of Vibration and
Acoustics, 1996, Vol. 118, No 4, pp. 567-574.
[Beikmann et al., 1997] - Beikmann, R. S., Perkins, N. C., Ulsoy, A. G., "Design and
Analysis of Automotive Serpentine Belt Drive Systems for Steady State Performance",
Journal of Mechanical Design, June 1997, Vol. 119, pp. 162-168.
[Bergé et al., 1984] - Bergé, P., Pomeau, Y., Vidal, C., "L'ordre dans le Chaos.", Paris :
Hermann, 1984, 353 pages, ISBN 2705659803.
[Bourdon et al., 1995] - Bourdon, A., Rigal, J.-F., Play, D., "Numerical Modal Result
Processings using computer aided design for analysing the global vibrating behavior of
gearboxes.", Proc. Inter. Congress Gear Transmission, Sofia, Bulgaria, Sept. 1995, Vol. II, pp.
104-110.
[Bourdon, 1995] - Bourdon, A., "Modélisation Dynamique Globale des Boites à
Vitesse Automobile.", Thèse de Doctorat, Sept. 1997, n° 97 ISAL 0084, INSA de Lyon, 221
p.
249
[Bussilet et al., 1995] - Bussilet, B., Orluc, P., Maurice, E., "La Logique et l'Inespéré.",
Moto Journal, sept. 1995, n° 1197, pp 64-79.
[Childs et al., 1990] - Childs, T. H. C., Parker, I. K., Coutsoucos, A., Day, A. J.,
Dalgarno, K. W.., "Tooth loading and Life of automotive timing belts", Proc. 17th Leeds Lyon
Symposium on Tribology, LEEDS, UK, Sept. 1990, pp.341-48.
[Childs, 1991] - Childs, T. H. C, Coutsoucos, A., Dalgarno, K. W., Day, A. J., Parker, I.
K., "Life Prediction of Automotive Timing Belts", Proceedings of International Conference on
Motion and Power transmission, Japan Society of Mechanical Engineering, Hiroshima, Japan,
1991, pp. 376-81.
[Conte, 1997] - Conte, M., "Contraintes par les caustiques. Déterminations : Des KI et
KII suivant l'ordre des chargements pour une fissure et pour deux fissures du déchargement en
mode ii de l'une ou l'autre.", 10è séminaire "Holographie et Technique Opto-Électroniques.",
Paris, 9-10 oct. 1997, pp. 79-89.
[Coulomb, 1785] - Coulomb, C. A., "Théories des machines simples en ayant égard au
frottement de leur parties.", Académie Royale des Sciences, Mémoire de mathématique et de
physique, 1785, volume X, p. 16.
[Daabin et al., 1991] - Daabin, A., Fawcett, J.-N., Burdess, J. S., "An experimental
study of the parameters influencing transmission error in toothed belt drives.", Proc. Eighth
world congress on the theory of machines and mechanisms, Prague, Czechoslovakia, 1991,
Vol.2, pp.547-551.
[Dalgarno, 1991] - Dalgarno, K. W., "Synchronous belt materials; durability and
performance.", PHD thesis, University of Bradford, 1991, 290 s.
[Dalgarno et al., 1994 (a)] - Dalgarno, K. W. , Day, A. J., Childs, T. H. C.,
"Synchronous Belt Materials and Belt Life Correlation.", Journal of Automotive Engineering,
1994, Vol. 208, Part D, pp. 37-48.
[Dalgarno et al., 1994 (b)] - Dalgarno, K. W., Day, A. J., Moore, R. B., "Lifetime
Dependant Properties of Automotive Power Transmission Belts.", European Seminar on Belt
Drives S172, London, Feb. 1994, non-paginated.
[Dancé & Play, 1991] - Dancé, J.-M., Play, D., "Geometrical Design Parameters
Influence on Timing Belt Load Distribution.", JSME International Conference on Motion and
Power Transmission, Hiroshima, Japan, Nov. 1991, pp.357-62.
[Dancé, 1992] - Dancé, J.-M., "Comportement Statique et Cinématique des
Transmissions par Courroies Synchrones. Modélisation et Détermination des Paramètres
Prépondérants.", thèse de doctorat, déc. 1992, no 92 ISAL 0082, INSA de Lyon, 239 pages.
[Debbabi, 1990] - Debbabi, C., "Contribution à l'Étude Dynamique des Courroies de
Transmission Soumises aux Irrégularités Cycliques de Vitesse des Moteurs.", Thèse de
Doctorat de l'Université Pierre & Marie Curie (Paris VI), 1990, 182 pages.
[Debbabi et al., 1990] - Debbabi, C., Simon, J.-M., Vialard, S., "Identification
dynamique de la fonction transmission par courroie striée cas des moteurs à combustion
interne.", Mécanique Matériaux Électricité, 1990, No 435, pp. 31-36.
250
[Debbabi & de Lamy, 1996] - Debbabi, C., de Lamy, A., "Simulation Numérique de la
fonction transmission des accessoires sur moteur automobile.", Ingénieurs de l'Automobile,
nov.-dec. 1996, pp. 56-61.
[Ewins, 1986] - Ewins, D. J., "Modal Testing: Theory and Practice.", Letchworth :
Research Studies Press, 1986, 269 s., ISBN 0 86380 017.
[Fawcett & Burdess, 1980] - Fawcett, J. N., Burdess, J. S., "An Experimental
Investigation of the Vibration of Toothed Belts", ASME paper, 80-C2/DET-94, Presentation
at the Century 2 International Power Transmission & Gearing Conference, San Francisco,
California, Aug. 1980, pp. 1-4.
[Fawcett et al., 1989] - Fawcett, J. N., Burdess, J. S., Hewit, J. R., 1989 International
Power Transmission and Gearing Conference, Chicago, IL, Apr. 1989, pp. 25-28.
[Fawcett, 1994] - Fawcett, J. N., "Advances in Belt Tensioning Techniques", European
Seminar on Belt Drives, S17, London, Feb. 1994, non-paginated.
[Firbank, 1977] - Firbank, T. C., "On the kinematics of synchronous belt drives.",
Engineer's Digest, 1977, Vol. 38, No 77, pp. 39-41.
[Fosdick & Villagio, 1989] - Fosdick, R., Villagio, P., "Influence of the Bending
Stiffness on the Shape of a Belt in Steady Motion", Journal of Applied Mechanics
(Transactions of the ASME), June 1986, Vol. 53, pp. 266-70.
[Gasper & Hawker, 1989] - Gasper, R. G. S., Hawker, L. E., "Resonance Frequency
Prediction of Automotive Serpentine Belt Drive Systems by Computer Modelling.", 12th
ASME Biennal Conf. Mech. Vibr. Noise, Montreal, Canada, Sept. 1989,pp.13-16.
[Gerbert, 1978] - Gerbert G, "Load distribution in timing belts", Journal of Mechanical
Design (Transactions of the ASME), Apr. 1978, Vol. 100, pp. 208-215.
[Gerbert, 1981] - Gerbert, G., "Some Notes on V-Belt Drives", Journal of Mechanical
Design (Transactions of the ASME), January 1981, Vol. 103, pp. 8-18.
[Gerbert, 1991] - Gerbert, G., "Timing Belt Jumping at Driven Pulleys", JSME
International Conference on Motion and Power Transmissions, Hiroshima, Japan, Nov. 1991,
pp. 368-375.
[Gervas, 1967] - Gervas, K. I., "Determining the mechanical properties of V-belts in
flexure", translated by P. G. WILLIAMS, Soviet rubber Technologie, 1967, Vol. 26, No 2, pp.
28-31.
[Gill, 1951] - Gill, S., "A Process for the Step by Step Integration of Differential
Equations in an Automatic Computing Machine.", Proc. Cambridge Phil. Soc., 1951, Vol. 47,
pp. 431-437.
[Hamel, 1927] - Hamel, G., ‘‘Uber Seilsteifigkeit.’’, Zeit. Angew. Math. Mech., 1927,
Vol. 7, No. 2, pp. 113-119.
[Harrison, 1992] - Harrison, A., "Dynamic Instabilities and Chaos in Running Belts and
Their Cleaning Devices.", in Applied Chaos edited by Jong Hyun Kim & John Stringer, NewYork : John Wiley & Sons, 1992, chap. 3, pp. 51-86, ISBN 0471544531.
251
[Heiduk & Arnold, 1994] - Heiduk, Th., Arnold, M., "Influence of Different
Excitations on the Dynamic Behaviour of Toothed Belt Drives", European Seminar on Belt
Drives S172, London, Feb. 1994, non-paginated.
[Hwang et al., 1994] - Hwang, S.-J., Perkins, N. C., Ulsoy, A. G., Meckstroth, R. J.,
"Rotational Response and Slip Prediction of Serpentine Belt Drive Systems.", Journal of
Vibration and Acoustics, Transaction of ASME, January 1994, Vol. 116, pp. 71-78.
[Jakowluk & Dudziak, 1975] - Jakowluk, Dudziak, "Investigation of the Effect of
Mechanical Stabilization and Temperature on the loading characteristics and the differential
Young moduli of the V-Belts.", Bulletin de l'Académie des sciences polonaise, 1975, Vol. 22,
No 7.
[Kagotani, 1981] - Kagotani, M., Aida, T., Koyama, T., Sato, S., Hoshiro, T., "Some
Methods to Reduce Noise in Toothed Belt Drives", Bulletin of the JSME, apr. 1981, Vol. 24,
No 190, pp.723-728.
[Kagotani, 1983] - Kagotani, M., Aida, T., Koyama, T., Sato, S., Hoshiro, T., "A study
on Transmission Characteristics of Toothed Belt Drives (2nd report, Transmission Error under
a State of Applied Initial Tension, Theoretical Analysis)",Bulletin of the JSME, 1983, Vol. 26,
No. 211, pp. 132-139.
[Kagotani, 1991] - Kagotani, M., Koyama, T., Ueda, H., "A Study on Transmission
Error in Timing Belt Drives (Effect of Eccentric Phase Angle of Pulley and Belt Width)",
JSME International Conference on Motion and Power transmissions, Hiroshima, Japan, Nov.
1991, pp. 363-367.
[Kagotani et al., 1993] - Kagotani, M., Koyama, T., Ueda, H., "A Study on
Transmission Error in Timing Belt Drives: Effect of Production Error in Polychloroprene
Rubber Belt", Journal of Mechanical Design (Transaction of the ASME), Dec. 1993, Vol. 115,
pp. 1038-1043.
[Koyama et al., 1979 (a)] - Koyama, T., Kagotani, M., Shibata, T., Hoshiro, T., "A
Study on Strength of Tooth Belt (2nd Report, influence of pitch difference on load
distribution)", Bulletin of JSME, 1979, Vol. 22, No 181, pp.1235-1239.
[Koyama et al., 1979 (b)] - Koyama, T., Kagotani, M., Shibata, T., Sato, S., Hoshiro,
T., "A Study on strength of thoothed belt (3rd report, fatigue strength and features of
fracture).", Bull. of the JSME, 1979, Vol. 23, No169, pp.988-993.
[Koyama et al., 1980] - Koyama, T., Kagotani, M., Shibata, T., Hoshiro, T., "A Study
on strength of thoothed belt (5rd report, effect of pitch difference on fatigue strength of toothed
belt). Bull. of the JSME, 1980, Vol. 23, No 181, pp.1240-44.
[Koyama et al., 1984] - Koyama, T., Kagotani, M., Hoshiro, T., "Life Transmission
Error and Noise of Toothed Belt Drives for Automobiles Engines", ASME, 1984, publication
84-DET-217
[Koyama et al., 1990] - Koyama, T., et al., "A Study on Timing Belt Noise (How to
Reduce Resonant Noise)", Journal of Mechanical Design, Sept 1990, Vol. 112, pp. 419-423.
252
[Kubo et al., 1971] - Kubo, A., Ando, T., Sato, S., Aida, T., Hoshiro; T."On the
Running Noise of Toothed Belt Drives (2nd report: Influence of Running Conditions and Some
Noise Reduction Methods)", Bulletin of the JSME, 1971; Vol. 14, No 75, pp. 998-1107.
[Lai & Chen, 1971] - Lai, J.-L., Chen, C. H., "Vibration and Dynamic Stability of an
Axially Moving Belt.", ASME paper, Presentation at the Vibrations Conference and the
International Design Automation Conference (ASME), Toronto, CANADA., Sept. 1971, pp.
2-8.
[Lizuka, 1994] - Iizuka, H., Watanabe, K., Mashimo, S., "Observation of fatigue failure
in Synchronous belts.", Fatigue and Fracture of Engineering Materials and Structure, 1994,
Vol. 17, pp. 783-790.
[Lizuka & Gerbert, 1996] - Iizuka, H., Gerbert, G., "Fatigue Failure Mechanism of
Synchronous Belts.", DE-Vol. 88, Power Transmission and Gearing Conference, ASME, San
Diego, California, USA, oct. 1996, pp. 319-325.
[Meirovitch, 1986] - Meirovitch, L., "Elements of Vibration Analysis", 2nd Edition,
New York : MacGraw Hill, 1986, pp. 290-296.
[Mizuno et al., 1988] - Mizuno, N., Inagaki, H., Nakakubo, Nakada, M., "Analysis of
Synchronous Belt Vibration in Automotive Valve Train", SAE Paper 880077, 1988, p. 7.
[Mockensturm et al., 1996] - Mockensturm, E. M., Perkins, N. C., Ulsoy, A. G.,
"Stability and Limit Cycles of Parametrically Excited, Axially Moving Strins.", Journal of
Vibration and Acoustics, July 1996, Vol. 118, pp. 346-351.
[Morel, 1992] - Morel, J., "Vibration des Machines et Diagnostic de leur État
Mécanique.", Paris : Eyrolles, Collection de la Direction des Études et Recherches
d'Électricité de France, 1992, 378 p.
[Mote, 1965] - Mote, C. D., Jr, "A Study of Band Saw Vibrations", Journal of the
Franklin Institute, 1965, Vol. 279, No. 6, pp. 430-444.
[Mote, 1972] - Mote, C. D., Jr, "Dynamic Stability of Axially Moving Materials",
Shock and Vibration Digest, 1972, Vol. 4, No.4, pp. 2-11.
[Pillow, 1994] - Pillow, J., "Review of Materials for Power Transmission Belts",
European Seminar on Belt Drives S172, London, Feb. 1994, non-paginated.
[Sabanchiev, 1983] - Sabanchiev, Kh. Kh., "Influence of Pitch Difference on Torsional
Vibrations of Pulleys of a Three-Shaft Toothed Belt Transmission", Vestnik
Mashinostroeniya, 1983, Vol. 63, Issue 6, pp. 32-34.
[Simpson, 1973] - Simpson, A., "Transverse Modes and Frequencies of Beams
Translating Between Fixed End Support.", Journal of Mechanical Engineering Science, 1973,
Vol. 15, No. 3, pp. 159-164.
[Tokoro et al., 1997] - Tokoro, H., Nakamura, M., Sugiura, N., Tani, H., Yamamoto,
K.-I., Shuku, T., "Analysis of Transverse Vibration in Engine Timing Belt.", JSAE Review,
1997, Vol. 18, pp. 33-38.
[TPM, 1990] - "Ducati 851 Superbike : L'épouvantail Italien", Technique & Pratique
Moto, 1990, N° 8, p. 2-18.
253
[Uchida et al., 1991] - Uchida, T., Yamaji, Y., Hanada, N., "The Analysis of a Load on
Each Tooth of 4 Cycle Gasoline Engine's Cam Pulley.", Int. Conf. On Belt Transmission,
Osaka, Japan, 1991, pp. 22-27.
[Ueda, et al., 1996] - Ueda, H., Kagotani, M., Koyama, T., Nishioka, M., "Noise and
Life of Helical Timing Belt Drives.", DE-Vol. 88, Power Transmission and Gearing
Conference, ASME, San Diego, California, USA., oct. 1996, pp. 305-309.
[Yang & Barker, 1989] - Yang, Y.-L., Barker, C. R., "Dynamic Analysis of an
Automotive Belt Drive System", Proceeding of The First International Applied Mechanical
Systems Design Conference (IAMSDC-1), Nashville, Tennessee, June 1989, pp. 75.1 - 75.10.
[Yue, 1993] - Yue, M. G., "Belt Vibration Considering Moving Contact and Parametric
Excitation", Journal of Mechanical Design (Transactions of the ASME), Dec. 1993, Vol. 115,
pp.1024-1029.
[Watanabe et al, 1990] - Watanabe, K., Koyama, T., Nagai, K., Kagotani, "A Study on
Timing Belt Noise (Theoretical Analysis for Forced Transverse Vibration of Timing Belt
With Parametric Excitation)", Journal of Mechanical Design (Transaction of the ASME),
Sept. 1990, Vol. 112, pp. 424-429.
[Waugh et al., 1980] - Waugh, D. L., Fisher, D. G., Gayer, M. D., "Torsional
Frequency.', DAYCO Corporation Belt Drive Design Handbook, DAYCO Corporation Belt
Technical Belt Technical Center, Springfield (Missouri), 1980.
Rapports de Contrat (Sogedac 85286724 11 Z10 confidentiels)
Monternot, C., Dancé, J.-M., Play, D., "Présentation du Modèle Dynamique de
Vibration Longitudinale.", Villeurbanne : INSA de Lyon - Laboratoire CASM, fév.. 1995, 21
p., Réf. 2802RAP3.1.
Monternot, C., Dancé, J.-M., Play, D., "Actualisation du Modèle et Notice d'utilisation
du Programme de dynamique d'une Transmission par Courroie crantée.", Villeurbanne : INSA
de Lyon - Laboratoire CASM, juin.. 1995, 27 p., Réf. 3006RAP3.2.
Monternot, C., Dancé, J.-M., Play, D., "Rapport final - Modèle dynamique de vibration
longitudinale.", Villeurbanne : INSA de Lyon - Laboratoire CASM, oct. 1995, 35 p., Réf.
3010FIN3.
Monternot, C., Dancé, J.-M., Play, D., "Présentation de résultats de calcul",
Villeurbanne : INSA de Lyon - Laboratoire CASM, déc. 1995, 17 p.
Monternot, C., "Notice d'utilisation du programme DYNAPOUL", Villeurbanne : INSA de
Lyon - Laboratoire CASM, avr. 1996, 16 p.
Monternot, C., Dancé, J.-M., Play, D., "Validation Numérique de DYNAPOUL",
Villeurbanne : INSA de Lyon - Laboratoire CASM, juillet 1996, 33 p., Réf. VALIDNUM.
254
Rapports d'Activité (confidentiels)
Monternot, C., "Présentation des essais sur le banc d'essais courroie CASM-INSA",
Villeurbanne : INSA de Lyon - Laboratoire CASM, oct. 1996, 25 p.
Monternot, C., "Validation du calcul des tensions", Villeurbanne : INSA de Lyon Laboratoire CASM, nov. 1996, 16 p.
Monternot, C., "Détermination de la rigidité de dent d'une courroie synchrone",
Villeurbanne : INSA de Lyon - Laboratoire CASM, janv. 1997, 30 p.
Publications Personnelles
[Monternot et al., 1996] - Monternot, C., Dancé, J.-M., Play, D., "Dynamic
Transmission Error and Load Distribution For Timing Belt Drives", 7th International Power
Transmission and Gearing Conference, San Diego, California, USA. , oct. 1996, pp. 297-304.
[Dancé et al., 1997] - Dancé, J.-M., Monternot, C., Play, D., "Comportement Statique et
Dynamique des Transmissions par courroie Synchrone.", Rencontre de la Mécanique, Roanne,
France, Juin 1997, 20 p.
[Monternot et al., 1996] - Monternot, C., Bourdon, A., et al., "Analyse et Conception
des systèmes mécaniques", 2ème colloque des doctorants, Institut National des Sciences
Appliquées de Lyon, avr. 1996, 2 p.
[Monternot & Benhamadouche, 1998] - Monternot, C., Benhamadouche, K.,
"Dynamique des transmissions par courroie dentée", 3ème colloque des doctorants, Institut
National des Sciences Appliquées de Lyon, mai 1998, 1 p.
[Monternot et al., 1998] - Monternot, C., Dancé, J.-M., Play, D., "Dynamic Behavior of
Toothed Belt Power Transmission", Journal of Mechanical Design (Transactions of the
ASME), 1998, to be published.
[Monternot et al., 1999] - Monternot, C., Dancé, J.-M., Play, D., "Dynamic Behavior
Simulation and Load Distribution For Timing Belt Drives", 4th World Congress on Gearing
and Power Transmission, Paris-La Défense, France, march 1999, to be published.
255