fiche technique - specification sheet 0870347 concept ideal first
Transcription
fiche technique - specification sheet 0870347 concept ideal first
DELIMIT FICHE TECHNIQUE - SPECIFICATION SHEET Référence 0870347 CONCEPT IDEAL FIRST / LAME FINITION - FINISHING LATH CARACTERISTIQUES TECHNIQUES - SPECIFICATIONS MATIERE - MATERIAL dimensions utiles effective dimensions essence du bois wood pin pine traitement - finition treatment - finishing traitement autoclave cl.3 cl.3 pressure treatment certification FSC provenance origin Pologne Poland 1,9 x 9 x 200 cm LOGISTIQUE - LOGISTIC AVANTAGE PRODUIT gencod 3 444 600 870 347 conditionnement packaging 5 poids unité de vente weight unit sale 3,5 kg type type COLIS - PACKAGE CONDITIONNEMENT PACKAGING Le concept idéal est constitué de poteaux rainurés en U qui permettent de faire toutes les configurations possibles simplement en les assemblant entre eux. Ces poteaux permettent de glisser les lames par emboîtement. poids weight long length 3,5 kg 200 prof depth x 9 x The ideal concept consists of posts with a U-shaped groove, which can be assembled together to make any configuration. The laths are slotted into place in the posts. haut height x x 1,9 cm cm INFORMATIONS COMPLEMENTAIRES - OTHER INFORMATION livré supplied autres informations other information assemblage assembly assemblage spécifique Par emboîtement By interlocking Fixer les poteaux entre eux avec des vis 5 x 40mm. Vérifier toujours l'applomb et la verticalité des poteaux. Pour la fixation des poteaux, utiliser des supports adaptés. Fixer chaque lame dans le poteau avec des vis inox. Conseil: fixer une lame à mi-longueur sur toute la hauteur pour stabiliser les lames. Finition: rajouter une lame de finition en haut des dessus de poteaux. Fix the posts to each other with 5 x 40mm screws. Always check the posts are straight and vertical. Use suitable brackets to fix the posts. Fix each lath in the post with stainless steel screws. Recommendation: fix one lath at mid-length over the full height to stabilise the laths. To finish: add one finishing lath on the top of the posts. 10/02/2014