automatic bandsaw
Transcription
automatic bandsaw
Metal working machines AUTOMATIC BANDSAW Available in / Verfügbar in -BSK 300 AA Photos may differ from actual products. Abbildungen können von der Wirklichkeit abweichen. BSK 300 AA Bandsaw specially designed for cutting pipes, shapes and sections of all types of ferrous materials and light alloys, with automatic bar feed and execution of automatic and manual cutting. - 980 mm advance Lenght BSK 300 AA Dimensions/Abmessungen Round / Rund Cutting Capacity 90° Flat / Flach Schnittleistung 90° Square / Vierkant Round / Rund Cutting Capacity 45° Flat / Flach Schnittleistung 45° Square / Vierkant Round / Rund Cutting Capacity 60° Flat / Flach Schnittleistung 60° Square / Vierkant Engine Emulsion pump Acoustic Cutting Speeds/Schnittgeschwindigkeiten Band Dimensions/Banddimensionen Work Height/Arbeitshöhe Weight/Gewicht Length / Länge Dimensions/Abmessungen Width / Breite Height / Höhe mm mm mm mm mm mm mm mm mm HP HP db m/min mm mm kg mm mm mm 300 AA 235 Ø 310 x 210 210 210 Ø 210 x 210 210 135 Ø 135 x 100 125 0,5 / 1,2 0,12 70 35/70 2750 x 27 x 0,9 820 660 2200 2100 1900 BSK 300 AA Bandsäge angelegte speziell zum Schneiden von Rohren, Formen und Bereichen aller Arten von eisenhaltigen Materialien und Leichtmetallen, mit Automatischen Bar feed und Ausführung von automatischen und manuellen Schneiden If the machine is selected to work in manual mode, The operator can openclose with the Handgrip, and run the belt saw while pushing the third (RUN) button of the handgrip. When the machine is selected in automatic mode, just by pushing the RUN button of the handgrip the machine will automatically close the vice , move down , cut, move up , and open the vice. Wenn die Maschine ausgewählt ist, im manuellen Modus zu arbeiten, der Betreiber kann öffnen-schließen mit dem Griff, und die Gürtel-Säge ausgeführt werden, während die dritte (RUN) drücken des Handgriffs. Wenn die Maschine im Automatik-Modus aktiviert ist, nur durch Drücken der Flucht wird Schaltfläche im Handgriff der Maschine automatisch schließen die Laster, nach unten A geschnitten, nach oben und öffnen die Laster. A Yellow= Open Vice/Green=Close Vice Gelb=Klemmung open/Grün=Klemmung zu Start/Stop 26