pro pipe bender - Daytona Automotive Equipment
Transcription
pro pipe bender - Daytona Automotive Equipment
PRO PIPE BENDER Pioneer of exhaust tube bending equipment since 1947 Built with high strength tooling steel! Easy to use knee control design keeps both hands free while bending Dual side cylinder design (no chains!) for added bending strength to wiper dies, as opposed to inferior single cylinder machines that have chains to break and adjust Compact segment expander and double-ended “clampless” swager design Heavy 10” IBeam frame for added strength Automatic depth control for repetitive bends with easy to Standard “Hi-Speed” 7 GPM pump offers quick bends and swages. Desirable feature for high-volume shops. Strong 5HP C-Face motor design provides quiet and strong bender performance when bending heavier gauge tubing PRO PIPE BENDER TOOLING PACKAGE Swaging Tools Quick Connect Slip Adaptor 1 ½” Slip Ram Die 1 ¾” Slip Ram Die 2” Slip Ram/ 1 ¾” Male Ball 2 ¼” Slip Ram/ 2” Male Ball 2 ½” Slip Ram/ 2 ¼” Male Ball 1 ½” Hinged Adapter Collar 1 ¾” Hinged Adapter Collar 2” Hinged Adaptor Collar 2 ¼” Hinged Adapter Collar 2 ½” Hinged Adapter Collar 1 ¾” – 2 ½” Female Ball 45° - 90° Head Pipe Tool Accessories Operators Manual Power Cord Assorted “O” Rings Auto Depth Control Compact segment expander and double – ended “clampless” swager for quick and easy expansion and swaging Bending Dies 1 ½” x 3” Radius Die 1 ½” Wiper Dies (2) 1 ½” Half Wiper 1 ¾” x 3” Radius Die 1 ¾” Wiper Dies (2) 1 ¾” Half Wiper Die 2” x 3” Radius Die 2” x 4” Radius Die 2” x 5” Radius Die 2” Wiper Dies (2) 2” Half Wiper Die 2 ¼” x 4” Radius Die 2 ¼” x 5” Radius Die 2 ¼” Wiper Dies (2) 2 ¼” Half Wiper 2 ½” x 5” Radius Die 2 ½” Wiper Dies (2) 2 ½” Half Wiper Die Expanding Segments 1 ½” – 3” Arbor Mandrel 1 ½” Segment Expander 1 ¾” Segment Expander 1 7/8” – 2” Segment Expander 2 ¼” – 2 ½” Segment Expander Adjustable Expanding Barrel Available Options VHS Training Tapes Angle Dial (Data Bending) Data Card System 1 7/8” Dies/ 2 ¾” Dies Custom round tubing dies Starting at ½” O.D. 3D Tooling Package Tubing Specs for Best Results 3” x 5” Radius Die 3” Wiper Dies (2) 3” Segment Expander 1 ½” OD to 1 ¾” OD – 18 Gauge Min(.049) 1 7/8” OD to 2” OD – 16 Gauge Min(.065) 2 ¼” OD to 2 ½” OD – 14 Gauge Min(.083) 3” OD – 13 Gauge Min(.095) OPTIONAL 3” TOOLING DISTRIBUTED BY: Budget Automotive Equipment Inc. PO Box 3077 Brighton, ON K0K 1H0 www.daytonaproducts.com