Datenblatt
Transcription
Datenblatt
Series CA0002 Flatcable with 2x 2.54mm IDC Female Header Qty Description Item 1 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 2 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 1 1 3 Flatcable, UL2651 AWG #28 PH=1.27, Length xxx 1 6.0 #1 #1 #2 #1 L2±0.25 3.80±0.15 P1 L1±0.25 2.54 #2 P2 #39 #40 #39 #40 Length±3 2.54 1.00 1 2 3 CA0002A with strain relief P1 P2 P1 P2 10.5±0.25 13.40 This document is protected by copyright law and international treaties. Reproduction except for personal use and distribution of this document will be prosecuted to the maximum extent possible under the law. Subject to changes without prior notice. Errors and omissions excepted. Copyright by NEXUS COMPONENTS GmbH Rev.1.3 CA0002B with strain relief CA0002C with strain relief Tolerances Linear X. ± 0.30 .X ± 0.25 .XX ± 0.20 All dim. in mm CA0002 A Type A = Type A B = Type B C = Type C BB Header Type P1, P2 A = with bar & strain relief B = with bar, w/o strain relief C = w/o bar, with strain relief D = w/o bar & strain relief NEXUS COMPONENTS GmbH 50 050 No. of contacts 06 ~ 64 Length L i.e. 050 = 50mm [email protected] www.nexus-de.com phone +49 (0)531 / 23 142-0 fax +49 (0)531 / 23 142-55 Series CA0002 Flatcable with 2x 2.54mm IDC Female Header Type A Qty Description Item 1 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 2 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 1 1 3 Flatcable, UL2651 AWG #28 PH=1.27, Length xxx 1 6.0 #1 #1 #2 #1 P1 L2±0.25 L1±0.25 2.54 #2 3.80±0.15 P2 #50 #49 #50 #49 2.54 Length±3 1.0±0.10 1 2 with strain relief P1 P2 10.5±0.25 3 13.40 This document is protected by copyright law and international treaties. Reproduction except for personal use and distribution of this document will be prosecuted to the maximum extent possible under the law. Subject to changes without prior notice. Errors and omissions excepted. Copyright by NEXUS COMPONENTS GmbH Rev.1.3 Connecting table P1 P2 1 ----------- 1 2 ----------- 2 : : 64 --------- 64 L1 = No. of contacts -1 x 2.54 2 L2 = No. of contacts 2 All dim. in mm CA0002 A Type A = Type A B = Type B C = Type C x 2.54 + 4.70 BB Header Type P1, P2 A = with bar & strain relief B = with bar, w/o strain relief C = w/o bar, with strain relief D = w/o bar & strain relief NEXUS COMPONENTS GmbH Tolerances Linear 50 X. ± 0.30 .X ± 0.25 .XX ± 0.20 050 No. of contacts 06 ~ 64 Length L i.e. 050 = 50mm [email protected] www.nexus-de.com phone +49 (0)531 / 23 142-0 fax +49 (0)531 / 23 142-55 Series CA0002 Flatcable with 2x 2.54mm IDC Female Header Type B Qty Description Item 1 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 2 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 1 1 3 Flatcable, UL2651 AWG #28 PH=1.27, Length xxx 1 6.0 #1 #1 #1 P1 L2±0.25 L1±0.25 2.54 #2 3.80±0.15 P2 #50 #49 2.54 10.5±0.25 Length±3 1 3 with strain relief P1 2 1.0±0.10 P2 13.40 This document is protected by copyright law and international treaties. Reproduction except for personal use and distribution of this document will be prosecuted to the maximum extent possible under the law. Subject to changes without prior notice. Errors and omissions excepted. Copyright by NEXUS COMPONENTS GmbH Rev.1.3 Connecting table P1 P2 1 ----------- 1 2 ----------- 2 : : 64 --------- 64 L1 = No. of contacts -1 x 2.54 2 L2 = No. of contacts 2 All dim. in mm CA0002 B Type A = Type A B = Type B C = Type C x 2.54 + 4.70 BB Header Type P1, P2 A = with bar & strain relief B = with bar, w/o strain relief C = w/o bar, with strain relief D = w/o bar & strain relief NEXUS COMPONENTS GmbH Tolerances Linear 50 X. ± 0.30 .X ± 0.25 .XX ± 0.20 050 No. of contacts 06 ~ 64 Length L i.e. 050 = 50mm [email protected] www.nexus-de.com phone +49 (0)531 / 23 142-0 fax +49 (0)531 / 23 142-55 Series CA0002 Flatcable with 2x 2.54mm IDC Female Header Type C Qty Description Item 1 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 2 2.54mm IDC Female Flatcable Header, xxPin, NEXUS 1690, flashgold 1 1 3 Flatcable, UL2651 AWG #28 PH=1.27, Length xxx 1 6.0 #1 #2 #49 #50 2.54 Length±3 10.5±0.25 L2±0.25 P2 3.80±0.15 P1 L1±0.25 2.54 #1 #1 2 3 P2 1 1.0±0.10 P1 with strain relief 13.40 This document is protected by copyright law and international treaties. Reproduction except for personal use and distribution of this document will be prosecuted to the maximum extent possible under the law. Subject to changes without prior notice. Errors and omissions excepted. Copyright by NEXUS COMPONENTS GmbH Rev.1.3 Connecting table P1 P2 1 ----------- 1 2 ----------- 2 : : 64 --------- 64 L1 = No. of contacts -1 x 2.54 2 L2 = No. of contacts 2 All dim. in mm CA0002 C Type A = Type A B = Type B C = Type C x 2.54 + 4.70 BB Header Type P1, P2 A = with bar & strain relief B = with bar, w/o strain relief C = w/o bar, with strain relief D = w/o bar & strain relief NEXUS COMPONENTS GmbH Tolerances Linear 50 X. ± 0.30 .X ± 0.25 .XX ± 0.20 050 No. of contacts 06 ~ 64 Length L i.e. 050 = 50mm [email protected] www.nexus-de.com phone +49 (0)531 / 23 142-0 fax +49 (0)531 / 23 142-55