Properties – High weather resistance – Optimal light
Transcription
Properties – High weather resistance – Optimal light
FunderMax Exterior is a high-quality co nstruction product that is available in large format panels for cladding balconies and building facades. FunderMax Exterior panels are duromer high-pressure laminates (HPL) as per EN 438-6, type EDF with extremely effective weather protection. The weather protective coating consists of double hardened acrylic polyurethane resins. They are produced in laminate presses under high pressure at high temperature. Surfaces: NT/NT NH (Hexa)/NT – 4100 x 1850 mm only NG/NG (Gloss) - 4100 x 1300 mm only NM/NM (Matt) – 4100 x 1300 mm only Core: F-Quality| Colour: brown Formats: The panels are manufactured sizes. In case of dimensional accuracy and angle accuracy we advise an all-sided blank. 2140 2800 4100 2800 4100 Thicknesses: Panels with reverse side sanded: for sandwich elements with a symmetrical structure. 2.0 to 4.0 mm. (in format 4100 x 1850 mm only on request) Panels with two-sided decor: 4.0 to 15.0 mm Thicknesses tolreances: 2,0 – 2,9 mm ± 0,2 mm 3,0 – 4,9 mm ± 0,3 mm 5,0 – 7,9 mm ± 0,4 mm 8,0 – 11,9 mm ± 0,5 mm 12,0 – 15,0 mm ± 0,6 mm Properties – High weather resistance – Optimal light-fastness – Double hardened – Scratch resistant – Solvent resistant – Low cleaning effort – Impact resistant – Suitable for all exterior applications – Decorative – Self-supporting – Bending resistant – Frost insensitive – Heat insensitive – Free from heavy metals – Easy to install FunderMax GmbH Klagenfurter Strasse 87‐89 A‐9300 St. Veit / Glan Tel. +43‐5‐94944646 Fax +43‐5‐949474646 E‐Mail [email protected] Internet www.fundermax.at x x x x x 1060 1300 1300 1850 1850 mm mm mm mm mm = = = = = 2,27 3,64 5,33 5,18 7,59 m² m² m² m² m² Die Max Exterior Platte ist ein hochwertiges Bauprodukt, das als großformatige Platte speziell für dauerhafte Balkon- und Fassadenbekleidungen verwendet wird. Max Exterior sind duromere Hochdrucklaminate (HPL) nach EN 438-6, Typ EDF mit einem äußerst wirksamen Witterungsschutz. Dieser Witterungsschutz besteht aus doppelt gehärteten Acryl-Polyurethan-Harzen. Ihre Erzeugung erfolgt in Laminatpressen unter großem Druck und hoher Temperatur. Details Mögliche Oberflächen: NT/NT NH (Hexa)/NT - nur im Format 4100 x 1850 mm NG/NG (Glanz) – nur im Format 4100 x 1300 mm NM/NM (Matt) – nur im Format 4100 x 1300 mm Kern: F-Qualität | Farbe: braun Formate: Die Plattenformate sind Produktionsformate. Bei notwendiger Mass- und Winkelgenauigkeit ist allseitiger Zuschnitt empfohlen. 2140 2800 4100 2800 4100 Dicken: Platten mit geschliffener Rückseite: Für symmetrisch aufgebaute Sandwichelemente. 2,0 bis 4,0 mm (im Format 4100 x 1850 mm nur auf Anfrage) Dicken Toleranzen: 2,0 – 2,9 mm ± 0,2 mm 3,0 – 4,9 mm ± 0,3 mm 5,0 – 7,9 mm ± 0,4 mm 8,0 – 11,9 mm ± 0,5 mm 12,0 – 15,0 mm ± 0,6 mm Platten mit beidseitigem Dekor: 4,0 bis 15,0 mm Eigenschaften – hoch witterungsbeständig – optimal lichtecht – doppelt gehärtet – kratzfest – lösungsmittelbeständig – gut reinigbar – schlagzäh – für alle Außenanwendungen geeignet – dekorativ – selbsttragend – biegesteif – frostunempfindlich – hitzeunempfindlich – leicht zu montieren FunderMax GmbH Klagenfurter Strasse 87‐89 A‐9300 St. Veit / Glan Tel. +43‐5‐94944646 Fax +43‐5‐949474646 E‐Mail [email protected] Internet www.fundermax.at x x x x x 1060 1300 1300 1850 1850 mm mm mm mm mm = = = = = 2,27 3,64 5,33 5,18 7,59 m² m² m² m² m²