rollformer für siding paneele rollforming machine for siding panels
Transcription
rollformer für siding paneele rollforming machine for siding panels
ROLLFORMER FÜR SIDING PANEELE ROLLFORMING MACHINE FOR SIDING PANELS Rollforming machine for siding panels Complete fully-automatic width adjustable rollforming machine for siding profiles 200-400 mm wide. All the profile dimensions can be infinitely adjusted within the max and min values. The basic scope of equipment will be provided with the cutting tool for the width of 200, 300 and 400 mm, other widths can be ordered additionally. Rollformer für Sidingpaneele Computergesteuerte, vollautomatische, breitenverstellbare Profilieranlage für Sidingpaneele von 200 - 400 mm Breite. Alle Profilabmessungen können zwischen den Minimal- und Maximalwerten stufenlos eingestellt werden. Standardmäßig werden Schneidwerkzeuge für die Breiten 200, 300 und 400 mm mitgeliefert, andere Breiten können zusätzlich bestellt werden. Die Anlage setzt sich im Wesentlichen zusammen aus Abcoileinheit mit Ladestuhl, Richtmaschine, Ausklinkmaschine, Mikrolinierung, breitenverstellbarem Sidingformer, fliegende Profilschere und Auslaufrollgang. Der Rollensatz ist hartverchromt ausgeführt. Maschine: Type: Profilbreiten: Profilhöhe: Profillängen: Blechdicken: Vormaterialdaten: V – max.: Steuerung: Profilieranlage für Sidingpaneele Breitenverstellbar (computergesteuert) 200 – 400 mm stufenlos wählbar 33 mm 1000 – 12000 mm 0,75 – 1,0 mm Stahl Stahl in Coilform bis 550 mm breit, max. 5t 0 - 30 m/min stufenlos wählbar SPS mit Bedieneroberfläche Essentially the line consists of a decoiler with a coil loading device, straightener, notching machine, micro waving, width adjustable siding former, flying-shearing machine and run-out roller conveyor. Forming rolls are hard-chrome plated. Machine: rollforming machine for siding panels; Type: width adjustable (computeroperated); Profile width: 200-400 infinitely adjustable; Profile height: 33 mm; Profile length: 1000 – 12000 mm; Sheet thickness: 0.75 – 1.0 steel; Primary material: steel coil up to 550 mm wide; max 5t; Max speed: 0-30 m/min infinitely adjustable; Control system: PLC with operating panel Zeman Bauelemente Produktionsges.m.b.H, St. Lorenzen 39, A 8811 Scheifling, www.zebau.com