C 15.2 - Dynacord
Transcription
C 15.2 - Dynacord
Technische Informationen Engineering Data Sheet C 15.2 15“ / 1.25“ 2-Way Fullrange Cabinet Features: • • • • • • • • • • Multi-Functional 2-Way Cabinet 500 W, 8 Ohms 90° x 50° Coverage Pattern 100 dB Sensitivity, 133 dB Maximum SPL Crossover with HF Protection SMX2151 LF Transducer DH3 Compression Driver Pole Mount for Tripod Use M8 Threaded Points Mounting Points to attach optional Mounting Bracket C 15.2 Order No. Cabinet Configuration 8 Ohms Minimum Impedance 5.3 Ohms Rated Power RMS 500 W Peak Power 2000 W Sound pressure level SPL 1 W / 1 m 100 dB Max. SPL 1 m (calculated with peak power) 133 dB Nominal Coverage Angle (Horizontal x Vertical) X-Over Frequency 57 Hz to 20 kHz 90° x 50° 1550 Hz LF Transducer SMX2151, 15‘‘ (381 mm) Driver HF Transducer DH3, 1.25‘‘ (32mm) Diaphragm Compression Driver Connectors Dimensions (W x H x D) Net Weight Shipping Weight Enclosure material Grille Suspension Warranty We expressly point out that the relevant safety regulations must be observed for “flying” loudspeaker systems. It is imperative that qualified expert advice is sought. Fullrange Passive 2-Way Nominal impedance Frequency Range (-10 dB) Wir weisen ausdrücklich darauf hin, dass bei gehängten Lautsprecherboxen die einschlägigen Sicherheitsbestimmungen zu beachten sind. Es muss unbedingt qualifizierte Fachberatung in Anspruch genommen werden! F01U165092 2x Neutrik Speakon NL4 Full-Range 1+ / 1Wired through 2+ / 2445 mm x 660 mm x 445 mm (17.5“ x 26.0“ x 17.5“) 28.3 kg (62.4 lbs) 31.8 kg (70.1 lbs) MDF with D-PUR PLUS Steel, Black Finish with Acoustic Gauze 3x M8 threaded Points - 1x on Each Side and 1x on the Rear of Enclosure 5 years Optional Accessories DC-MBC15-UMH F01U169671 TMA Tilt Angle for UMH F01U118977 RMA Rotatable Mounting kit F01U118976 TC-02 Truss clamp F01U100657 EBK-M8 Eye Bolt Kit F01U166797 Spare Parts LF Transducer F01U134309 HF Transducer F01U103119 Beschreibung Description Mit der C 15.2 bietet DYNACORD eine äußerst kompakte, trapezförmige 15“ / 2-Weg Fullrange Box mit einer sehr hohen Belastbarkeit von 500 W Continuous / 2000 W Peak und einem Wirkungsgrad von 100 dB 1W / 1m für Anwendungen, die einen erweiterten Tieftonbereich erfordern. Dort kommt ein SMX 2151 Woofer zum Einsatz, im Hochtonbereich arbeitet ein DH3 Compression-Treiber in ein 90° x 50° Constant Directivity Horn für den Frequenzbereich oberhalb 1550 Hz. Flugpunkte für Eyebolts erlauben vertikale oder horizontale Aufhängung. Zusätzlich ist optional ein Montagebügel (DC-MBC15-UMH) erhältlich, der kompatibel ist zum DYNACORD PI-Easy Montagesystem zur Ausrichtung in bis zu drei Ebenen. Zur einfachen Erweiterung der Tiefbass-Performance wird ein parallel geschalteter Sub 1.18 Subwoofer empfohlen. Diese Kombination ist auch ideal für ein Aktiv-2-Weg System zusammen mit den Controllern DSP 260 oder DSP 600 und Endstufen der SL-Serie geeignet. In the C 15.2, DYNACORD is offering an extremely compact, trapezoidal 15” / two-way full-range cabinet boasting very good power handling (500 W continuous / 2000 W peak) and sensitity of 100 dB 1W / 1m for applications requiring an extended low end. Here, an SMX 2151 woofer is used, whilst in the high frequency range, a DH3 compression driver into a 90° x 50° constant directivity horn transduces everything above 1550 Hz. Flying points for eyebolts are provided to permit either vertical or horizontal suspension. Also available as an option is the DC-MBC15-UMH mounting bracket, which is compatible with the DYNACORD PI-Easy mounting system and supports up to three levels of orientation. To extend the low bass performance, a Sub 1.18 subwoofer connected in parallel is recommended. This combination is also ideal for an active two-way system together with the DSP 260 or DSP 600 controllers and power amplifiers from the SL series. Illustration 1: Dimensions Illustration 2: Frequency Response SPL / dB Frequency Response, 1/6 Oct. 110 105 100 95 90 85 80 75 70 65 60 20 100 1k 10k 20k 10k 20k 10k 20k f / Hz Impedance, 1/6 Oct. 200 100 |Z| / Ω 50 20 10 5 2 1 20 100 1k f / Hz −6dB Beamwidth, 1/1 Oct. 360 φ / deg 200 100 80 60 40 30 20 10 20 horizontal vertical 100 1k f / Hz 25 Directivity Index DI, Directivity Factor Q, 1/1 Oct. 200 20 100 20 10 10 5 5 2 0 20 100 f / Hz 1k 10k 1 20k Q DI / dB 50 15 Illustration 3: Block diagram Illustration 4: Horizontal Directivity Horizontal Directivity, 3dB/Div, 30dB Radius, 1/1 Oct. 0° 30° −30° 30° 60° −60° 90° −90° 120° −120° 150° 30° ±180° 0° −120° 150° 30° ±180° 0° 60° ±180° 120° 60° ±180° −150° 250 Hz −30° −60° 90° −90° 120° −120° 30° −150° 8 kHz ±180° 0° 60° −30° −120° 150° −120° 150° −90° 120° 120° −150° 1 kHz −60° 90° −90° 30° −120° ±180° 0° 90° −30° −90° −30° −60° 150° 90° 0° 60° −150° 125 Hz −60° 30° −150° 4 kHz ±180° 0° 60° −30° −120° 150° −120° 150° −90° 120° 120° −150° 500 Hz −60° 90° −90° 30° −90° 120° 90° −30° 90° 30° −60° 150° −60° −30° 60° −150° 63 Hz 60° 0° ±180° 0° 60° −150° 2 kHz −30° −60° 90° −90° 120° −120° 150° ±180° −150° 16 kHz Illustration 5: Vertical Directivity. Vertical Directivity, 3dB/Div, 30dB Radius, 1/1 Oct. 90° 120° 60° 120° 150° 30° ±180° 0° −150° −120° 120° −30° −90° 90° −150° 120° −30° −90° 90° 150° −120° −90° 150° −120° −90° −60° 8 kHz −90° 90° −60° 250 Hz 60° 30° ±180° 0° −150° −120° 120° −30° −30° 150° 60° 0° −150° −150° −60° 1 kHz 30° ±180° 0° 120° −30° −90° 90° ±180° 60° −150° 60° 30° −120° 0° 90° 150° −60° 125 Hz ±180° 120° −60° 4 kHz −90° 90° 30° 60° −30° −30° 150° −120° 0° −150° −150° −60° 500 Hz 30° ±180° 0° 120° 0° −120° ±180° 60° ±180° 120° 30° −120° 30° 60° 150° −60° 63 Hz 150° 90° −30° −90° 90° 150° −60° 2 kHz 60° 30° ±180° 0° −150° −120° −30° −90° −60° 16 kHz Rigging Illustration 6: Remove the M8 Screws from the Loudspeaker, then install the Washers and Eyebolts (EBK-M8 Eye Bolt Kit) to the Loudspeaker Washer has to be used Illustration 7: Eyebolts shown oriented in the plane of pull (CORRECT) Illustration 8: Eyebolts not oriented in the plane of pull (INCORRECT) Illustration 9: Vertical orientation Illustration 10: Optional Accessories TMA RMA MBC15-UMH CAUTION: Eyebolts must be fully seated and orient in the plane of pull as shown. Always use washers under the eyebolt to distribute the load on the enclosure. 12000 Portland Avenue South, Burnsville, MN 55337, USA Phone: +1 952/844-4051, Fax: +1 952/884-0043 www.dynacord.com © Bosch Communications Systems Part Number F01U164316 Vs 01 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: +49 9421-706 0 Fax: +49 9421-706 265 Asia & Pacific only. For customer orders, contact Customer Service at: +65 6571 2534 Fax: +65 6571 2699 For technical assistance, contact Technical Support at: +49 9421-706 0 09/2010 Specifications subject to change without notice.