BCV-net e-Code
Transcription
BCV-net e-Code
Calculator The BCV e-code reader works as a calculator if no card is inserted. If a card is inserted, you can access the calculator function by pressing the MENU key. How to access BCV-net using the BCV e-code system For more information or assistance : Customer Service Center : Address : e-mail : Internet : 0844 228 228 or 021 212 10 00 BCV Electronic Banking Case postale 300 1001 Lausanne [email protected] www.bcv.ch/bcvnet The new BCV-net identification system consists of a personal BCV e-code card and a card reader, giving you optimum security for your online banking transactions. The BCV-net security system : 40-783e/07.12 • • • • N.B. Before you use the e-code reader for the first time, you must remove the plastic cover protecting the batteries. Instructions for replacing batteries are provided in the enclosed user guide. The security information is stored on your personal BCV e-code card. The BCV e-code reader is not linked to any one BCV e-code card and may be used by more than one person. User number BCV e-code card PIN (personal identification number) BCV e-code reader Security benefits : • Your personal data are protected on your BCV e-code card and cannot be copied. • Access codes are generated randomly and are only valid for one use. When you use BCV-net for the first time with your new BCV e-code, you will be asked to change your PIN. Changing your PIN : 1. Insert the card into the BCV e-code reader and press the ON key. ENTER PIN will appear on the screen. 2. Enter the PIN that you received separately and confirm by pressing OK. 3. Select a new PIN (6-8 digits long) and enter it. The PIN must not be an obvious number, such as a telephone number or a date of birth. 4. Confirm by pressing OK. 5. Enter your new PIN again and confirm by pressing OK. 6. Your new PIN is now active. To change your PIN at any other time : 1. Insert the card into the BCV e-code reader and press the ON key. Then press the MENU key. 2. Select CHANGE PIN using the down-arrow key and confirm by pressing OK. 3. Enter your PIN and confirm by pressing OK. 4. Refer to points 3 through 6 above to complete this operation. If you forget your PIN, the BCV e-code card must be replaced. Accessing BCV-net : 1.Go to www.bcv.ch/bcvnet. 2.Enter your full user number (letters and figures). 3.An 8-digit CHALLENGE number will appear under your user number. 4.Insert your BCV e-code card in the reader, press the ON button and press the CODE button. 5.Enter the CHALLENGE number into the card reader and confirm by pressing OK. 6.ENTER PIN will appear on the card reader’s screen. Enter your PIN. If you make a mistake, you can delete the last number by pressing the “C” key. When you have entered your PIN correctly, press OK. 7.Enter the code generated by the BCV e-code reader in the CODE field on the login page. Click on CONFIRM. Your personal BCV-net page will then open. N.B. : There is a time limit for some of these operations. If you are timed out, the information displayed by the card reader will disappear and you must begin the procedure again from the start. The system’s security is not compromised by time-outs.