Product Family Name HID Xenon High Intensity Discharge Lamps

Product Family Name
HID Xenon High Intensity Discharge Lamps
FEATURES
x Internal Ballast
x 2 Lens Patterns: Flood,
Trapezoid
x Compact size: 5 in x 5 in x
6 in deep [127,00 mm x
127,00 mm x 152,4 mm]
x Designed to retrofit many
OEM applications
x 5000 hour life (standard
usage)
x Isolation mounted to
withstand vibration
x Completely sealed from
contaminants
TYPICAL APPLICATIONS
x Construction
x Agricultural
x Mining
x Industrial Trucks
x Forestry
WARNING
PERSONAL INJURY
DO NOT USE these
products as safety or
emergency stop devices or
in any other application
where failure of the product
could result in personal
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
Honeywell Xenon high intensity discharge lamps are designed to hold up to
the extreme demands of the off-highway constructions and agricultural
markets. HID technology is significantly more efficient than halogen and
produces more light with less amperage draw.
Honeywell’s HID lamps provide three times the light output compared to the
average halogen lamp. The technology allows equipment to operate more
safely with less load on the electrical system resulting in optimum alternator
and battery life.
Honeywell’s HID features an electronic bulb/igniter/ballast system for
maximum performance throughout a broad temperature and vibration range.
This eliminates normal failure modes including filament breakage producing
a life expectancy six times greater than a typical halogen lamp.
WARNING
MISUSE OF DOCUMENTATION
x The information presented in this product sheet is for reference only. Do
not use this document as a product installation guide.
x Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control
Product Family Name
HID Xenon High Intensity Discharge Lamps
12 VOLT SYSTEM SPECIFICATIONS
Nominal Voltage:
12 V
Operating Voltage Range:
9 V to 16 V
Startup Amperage:
15 A @ 9 V, 9 A @ 16 V
Stabilized Amperage:
15 A @ 9 V, 2.7 A @ 16 V
Startup Time:
0.1 to 5 seconds
Part Numbers Beam Pattern
Flood
84760-50
Trap
88216-50
Spot
88217-50
24 VOLT SPECIFICATIONS
Nominal Voltage:
24 V
Operating Voltage Range:
10 V to 32 V
Startup Amperage:
8 A @ 14 V, 5 A @ 32 V
Stabilized Amperage:
3.3 A @ 14 V, 1.4 A @ 32 V
Startup Time:
0.1 to 5 seconds
Part Numbers Beam Pattern
88735-50
Flood
88913-50
Trap
MOUNTING DIMENSIONS (in)
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as
being free of defective materials and faulty
workmanship. Contact your local sales office for
warranty information. If warranted goods are
returned to Honeywell during the period of coverage,
Honeywell will repair or replace without charge those
items it finds defective. The foregoing is Buyer’s
sole remedy and is in lieu of all other warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose.
Specifications may change without notice. The
information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
www.honeywell.com/hobbs
Honeywell
1034 East Ash Street
Springfield, Illinois 62703
006156-1-EN IL50 GLO 804 Printed in USA
Copyright 2004 Honeywell International Inc. All Rights Reserved.
While we provide application assistance personally,
through our literature and the Honeywell web site, it
is up to the customer to determine the suitability of
the product in the application.
For application assistance, current specifications, or
name of the nearest Authorized Distributor, contact a
nearby sales office. Or call:
1-217-753-7773 USA/Canada
FAX
1-217-753-7789 USA
INTERNET
www.honeywell.com/hobbs
[email protected]