Ilyass TABIAI
Transcription
Ilyass TABIAI
H (+1 514) 431-0479 k [email protected] m linkedin.com/in/ilyasstabiai Ilyass TABIAI Nationalité : Marocain Né le 26 Mai 1990, Marrakech English CV is on next page 4387, rue Jean-Brillant Montréal (QC) H3T 1P2, CA Recherche de stage en gestion de projet technologique (été 2016) COMPÉTENCES Gestion de projet Communication interne et gestion d’équipe de travail (esprit d’équipe, motivation) Innovation et gestion des risques dans les firmes technologiques Ingénierie Méthodes numériques pour l’ingénierie Composites (comportement mécanique, homogénéisation, endommagement) Mécanique des milieux continus, péridynamique Méthodes statistiques/probabilistiques d’apprentissage machine Informatique Ingénierie : CATIA, ANSYS, MATLAB, SolidWorks, Peridigm Bureautique : MS Office, LATEX Programmation : python, R, SQL, NoSQL, HTML/Php, FORTRAN Langues Français/Arabe : langue maternelle Anglais : bilingue Espagnol : niveau intermédiaire (5 ans) Japonais : écriture et lecture basique (10 mois d’apprentissage intensif au Japon) FORMATIONS 2015 – 2018 Programme FONCER avec l’aérospatial (AeroCREATE program) Université McGill / CRSNG / CRIAQ / AéroETS – Montréal Formation de développement professionnel et d’aptitudes en leadership en entreprise Attribution d’une bourse annuelle pour la durée du programme 2014 – 2018 Doctorat (Ph.D.) – Génie mécanique École Polytechnique de Montréal - (Canada) Prédiction de l’endommagement matériaux composite 2012 – 2014 Maı̂trise en ingénierie (M.Sc.Eng. from Georgia Tech) – Génie mécanique Institut Technologique de la Géorgie - Atlanta, Metz (USA - France) Ingénieurie mécanique, Entrepreneuriat et Gestion dans les firmes technologiques 2010 – 2014 Diplôme d’ingénieur – Génie mécanique et industriel Arts et Métiers ParisTech/ENSAM – Metz (France) 2008 – 2010 Études universitaires de 1er cycle Lycée Chaptal - Classes Préparatoires aux Grandes Écoles - Paris (France) Mathématiques, physique, sciences de l’ingénieur et chimie Avant 2008 Baccalauréat, spécialité Mathématiques, Option Internationale en Arabe Lycée International Victor Hugo - Marrakech (Maroc) 1/4 EXPÉRIENCES DE TRAVAIL Depuis 2014/01 Chargé de laboratoire – Résistance des matériaux École Polytechnique de Montréal (MEC2405) – Enseignement • Enseigner aux étudiants la résistance des matériaux lors de laboratoires • Correction des rapports fes étudiants, participation à l’examen final 2013/02 – 2013/07 Simulations de contact entre cylindre et piston Yamaha Motor Company - Iwata (Japon) Inégenieur en Recherche et Dévelopement Matériaux • Déterminer puis programmer un modèle de contact elasto-plastique • Concevoir et effectuer des expériences pour vérifier les simulations • Valider les résultats analytiques et numériques grâces aux expériences 2012/04 – 2012/08 Test étalons de caractérisation des matériaux de moteurs concurrents Yamaha Motor Company - Iwata (Japon) Inégenieur-Stagiaire en Recherche et Dévelopement Matériaux Projet Tripartite : ENSAM, Georgia Tech, Yamaha Motor Co. • Observation et caractérisation expérimentale de matériaux utilisés dans les moteurs des véhicules à deux roues concurrents • Détermination des processus de fabrication possibles pour obtenir des propriétés similaires 2012/02 Participation au Challenge des 24H de Pertuy Pertuy construction - Strasbourg (France) • Conception d’une zone d’aménagement concertée dans la région de Lille • Second prix et Prix de l’innovation 2011/02 Stage en ingénierie Ménara Préfa – Matériaux de construction – Marrakech (Maroc) • Travail sur une ligne de fabrication de composants de construction • Optimisation du rendement de la ligne (logiciel GrafCet) CENTRES D’INTÉRÊT Entrepreneuriat Co-président de Conseil 3D TRIP inc. Co-fondateur de Conseil 3D TRIP inc. – Montréal Start-up en impression 3D Défi entrepreunariat diversité Polytechnique-UdeM – Montréal 1er prix : Projet de start-up pour le post-traitement de pièces imprimées en 3D Informatique Programmeur dans une équipe de 4 membres de développement depuis 2013 Vainqueur du Yo-App Challenge (5000$) - 2014 Web-application autour de l’actualité basée sur le traitement données massives Participation au WearHacks Challenge, Montréal - 2014 Détermination de la consommation de dioxygène à l’aide d’un accéléromètre Références sur demande 2/4 H (+1 514) 431-0479 k [email protected] m linkedin.com/in/ilyasstabiai/en Ilyass TABIAI Valid internship permit and VISA student 4387, Jean-Brillant street Montreal (QC) H3T 1P2, CA Internship in technology project management (summer 2016) SKILLS Project management Internal communication and team management Innovation and risk management in technological firms Engineering Numerical methods for engineering Composites (mechanical behavior, homogenizing, damaging) Continuum mechanics, peridynamics Computer Science Engineering : CATIA, ANSYS, MATLAB, SolidWorks, Peridigm Office : MS Office, LATEX Programming : python, R, SQL, NoSQL, HTML/Php, FORTRAN Supervised and Unsupervised Machine Learning Methods Langues French/Arabic : mother tongue English : bilingual Spanish : intermediate level (5 years) Japanese : basic writing and reading skills (10 months intensive learning in Japan) EDUCATION 2015 – 2018 AeroCREATE NSERC program for graduate students McGill / NSERC / CRIAQ / AeroETS – Montreal Funding and workshops for professional development and leadership aptitudes 2014 – 2018 Ph. D. candidate – Mechanical engineering Ecole Polytechnique of Montreal - (Canada) Damage prediction in composite materials 2012 – 2014 Master of Science degree in Engineering – Mechanical Engineering Georgia Tech Institute of Technology - Atlanta, Metz (USA - France) Mechanical engineering, entrepreneurship and management in technology firms 2010 – 2014 Engineering diploma – Mechanical and Industrial Engineering Arts et Métiers ParisTech/ENSAM – Metz (France) Diploma recognized by l’Ordre des ingénieurs du Québec 2008 – 2010 Undergraduate studies Chaptal Highschool - Classes Préparatoires aux Grandes Écoles - Paris (France) A 2 year program in Maths and Science preparing the entrance examination for the “Grandes Ecoles” 3/4 WORK EXPERIENCE Depuis 2014/01 Lab assistant – Mechanics of Materials II Ecole Polytechnique of Montreal (MEC2405) – Teaching • Teach mechanics of materials to students during laboratories • Review and grade experimental reports 2013/02 – 2013/07 Contact simulations between cylinder bore and piston Yamaha Motor Company - Iwata (Japan) Research and Development Engineer in Materials • Tripartite research project between Georgia Tech, ENSAM and Yamaha • Write simulation code using latest contact laws from the literature • Conceive and perform experiments to valid the written simulation code 2012/04 – 2012/08 Benchmark characterization of competitors’ engine materials Yamaha Motor Company - Iwata (Japan) Internship as Research and Development Engineer in Materials • Experimental characterization of materials used in competitors’ motorbikes • Investigating possible manufacturing processes to obtain similar properties 2011/02 Internship as a factory worker Ménara Préfa – Construction materials – Marrakesh (Morocco) • Worker on a hydraulic press production line of construction component • Yield optimization of the production line using GrafCet programming INTERESTS Entrepreneurship Co-founder of 3D TRIP inc. – Montreal Start-up in 3D-printing Entrepreneurship diversisty challenge of Polytechnique-UdeM – Montreal 1st prize : Start-up project about post-processing of 3D-printing parts Programming Developer in a programming team of 4 since 2013 Winner of the Yo-App Challenge (5000$) - 2014 News web-application based on massive data processing Participant in the WearHacks Challenge, Montreal - 2014 Determining of oxygen consumption using an accelerometer Photography Part of a Board of European Students in Photography Winner of the BES in 2012 at Maribor, Slovenia User of light-field cameras References available on demand 4/4