gsm communicators catalogue
Transcription
gsm communicators catalogue
( ) 870020/B - 07/2007 - © Daitem - ATRAL SYSTEM S.A.S. - R.C.S. Grenoble 311 586 382 The services and product data presented in this document may be modified without prior notice - photos not binding. GSM COMMUNICATORS CATALOGUE www.gmtechtronics.co.uk GM Techtronics Ltd • Unit 17 Paxcroft Farm • HILPERTON • TROWBRIDGE • WILTS • BA14 6JB Sales Tel: 0844 824 6690 • Fax: 0844 824 6692 • Technical Support Tel: 0844 824 6693 Email: [email protected] • www.gmtechtronics.co.uk DAITEM • ATRAL SYSTEM S.A.S. • International development • Rue du Pré de l’Orme • 38926 CROLLES Cedex • FRANCE Tel + 33 (0)476 45 32 71 • Fax +33 (0)476 45 31 94 • www.daitem.com WIRELESS SECURITY SYSTEMS DAITEM GSM COMMUNICATORS With its range of GSM communicators, Daitem can be relied on for a broad scope of applications… Technical monitoring Communicators boasting genuine independence Because the communicators are fully independent, they can also be used for many applications that are entirely unrelated to security. They can be linked to temperature probes, sensors or other technical monitoring devices and thus act as technical call beacons when monitoring of sensitive installations (greenhouses, incubators, etc.) is required. Furthermore, they can come in a sealed casing (optional) to protect them in difficult environments. Daitem GSM telephone communicators use a GSM modem to which trigger inputs are connected by wire or radio in order to transmit alarms or messages from a device (control panel, sensor, etc.) to a remote centre or telephone. They pass on messages about intrusion alarms, technical alarms, etc. to remote users. The communicator can call up several telephone numbers (a remote central station monitoring company or individual correspondents), on a fixed or mobile line. The messages transmitted are either digital (for remote central station monitoring companies), vocal or SMS. It is also possible to call-up the communicator using a fixed or mobile phone in order to remotely control the alarm system or contacts (e.g. for activating an automatic control system). The communicator can be used alone or as backup to a PSTN telephone dialler using a line cut detector (optional). Different types of messages ✦ “Voice” type messages These messages are used to call up correspondents or keyholders on their fixed or mobile phone. The messages transmitted are either standard or pre-recorded by the user and saved in the GSM communicator memory. The units have several inputs and each can be used for a different personalised message (e.g. “Breakdown, freezer”, “Intrusion, kitchen”, “Flood, cellar”, etc.). ✦ “SMS” type messages These text format messages are used to transmit alarms to mobile phones. Protection of isolated sites A range to cover all applications The new range of Daitem GSM telephone communicators provides reliable and efficient solutions, whatever the type of site on which they are installed. With different product references available, you can choose between a hardwired or radio link depending on your site layout. Whether you opt for a mains-connected solution or an entirely battery-run communicator, the whole range is simple to install thanks to user-friendly and intuitive programming. Daitem GSM communicators are not only independent of the PSTN network, but some battery-powered models are also independent of the mains power supply and have a battery life of up to 5 years. Because of this, they are especially suitable for protecting sites that are isolated or under development: houses, construction sites, companies, etc. ✦ “Digital” type messages These messages are transmitted by the communicator to a remote central station monitoring company. The GSM communicators use Ademco, Contact ID and Daitem protocols. Remote dialogue What’s more, you cannot fail to be seduced by the brand new design and compact size of the products, as well as all the accessories available. With their built-in microphone and loudspeaker, Daitem GSM communicators allow users to listen in to the protected premises should an alarm be triggered. To erase any doubt about the alarm, an alarm confirmation call makes dialogue between the person having triggered the alarm and the user possible. Find out about the different applications possible with this new range of telephone communicators comprising on-board GSM technology. () 2 () 3 G S M A P P L I C AT I O N S G S M A P P L I C AT I O N S PROTECTING SITES VIA A LINK WITH A HARDWIRED ANTI-INTRUSION ALARM PROTECTING SITES IN AN ENTIRELY INDEPENDENT WAY VIA A LINK WITH A DAITEM ANTI-INTRUSION ALARM Applications possible with a 450-29X battery-powered GSM communicator ✦ 4 extendible relay inputs/2 outputs. Applications possible with a 470-29X battery-powered GSM communicator ✦ 4 inputs/2 outputs. Communicator Communicator linked to a hardwired anti-intrusion alarm in a shop. linked to a Daitem control panel in an isolated dwelling. Communicator linked to a hardwired anti-intrusion alarm in a factory or warehouse as back-up to a PSTN communicator (with line cut detector). Hardwired alarm control panel Daitem control panel GSM Daitem control panel GSM Communicator linked to a Daitem alarm control panel on a mobile construction site. RTC GSM SENDING A REMOTE TECHNICAL ALARM OPERATING AN AUTOMATIC CONTROL SYSTEM / RECEIVING ALARM NOTIFICATION REMOTELY Applications possible with a 450-29X battery-powered GSM communicator ✦ 4 extendible relay inputs/2 outputs. Applications possible with a 442-29X mains-powered GSM communicator ✦ 4 relay inputs/2 outputs. Communicator Communicator linked to technical sensors in an incubator. linked to an automatic rotation control system on a billboard. GSM GSM Billboard control system Technical sensors Communicator Communicator linked to technical sensors in a sedimentation tank. linked to a solenoid valve control system. GSM GSM Solenoid valves Technical sensors () 4 () 5 G S M C O M M U N I C AT O R S F U N C T I O N S A N D T E C H N I C A L F E AT U R E S 442-29X (version with europeen standard mains plug) 442-29U (version with UK mains plug) ✦ Powered via external 230 V / 12 V transformer (supplied). ✦ Self-monitoring of external power supply and transmission of specific message in case of mains power supply failure. MAINS-POWERED GSM COMMUNICATOR WITH 4 WIRED INPUTS / 2 RELAY OUTPUTS ✦ Rechargeable standby battery supplied , 48 hour standby. ✦ Consumption in standby mode: 40 mA. 3 YEARS di tio ns ng TY W ✦ Permanent remote control of 2 relay outputs. RAN AR i rd acco Recommended for monitoring and controlling technical applications. ✦ Mains power supply. ✦ Hardwired links with monitored devices. ✦ Call back control. ✦ Listen-in / talk back. on to D aitem c 450-29X BATTERY AND/OR MAINS POWERED GSM COMMUNICATOR WITH 4 WIRED INPUTS / 2 RELAY OUTPUTS se fu di tio ns AU Y M W N TO O 5 ✦ Extension to up to 8 inputs / 4 outputs possible using 901-21X board. rm YEARS o al c s ondition o YEARS on to D aitem c in n 3 TY RAN AR ng ✦ Powered by (2 x 3,6 V / 18 Ah) lithium battery pack (BatLi23 supplied). ✦ Can be powered via 230 V / 12 V external transformer (optional). ✦ Emergency standby battery (3,6 V / 700 mAh) lithium/ion (Ref. 908-21X supplied). ✦ Remote control of relay outputs and Daitem alarm system: - following alarm confirmation call only if powered by lithium battery pack, - permanently if powered by external mains supply. ✦ Self-monitoring of power supply and transmission of specific message in case of low batteries. ✦ Consumption in standby mode: 180 µA max. ✦ Compatible with all Daitem alarm ranges. AU TwinPass ® se fu di tio ns 5 rm YEARS o al c s ondition o 3 YEARS on to D aitem c in n ng N TO O Y M RAN AR TY W ✦ 5-year battery life based on: - 1 test call / week, - 10 events / year. i rd acco 6 ✦ Remote control of relay outputs: - following alarm confirmation call only if powered by lithium battery pack, - permanently if powered by external mains supply. ✦ 5-year battery life based on: - 1 test call / week, - 10 events / year. BATTERY AND/OR MAINS POWERED GSM COMMUNICATOR WITH TwinPass® RADIO TRANSMISSION AND 4 WIRED INPUTS / 2 RELAY OUTPUTS () ✦ Emergency standby battery (3,6 V / 700 mAh) lithium/ion (Ref. 908-21X supplied). ✦ Consumption in standby mode: 180 µA max. 470-29X Recommended for protecting sites fitted with a Daitem anti-intrusion alarm. ✦ 5-year battery power supply. ✦ Hardwired links with monitored devices. ✦ Transmission of radio messages from a Daitem alarm system. ✦ Call back control. ✦ Listen-in / talk back. ✦ Can be powered via 230 V / 12 V external transformer (optional). ✦ Self-monitoring of power supply and transmission of specific message in case of low batteries. i rd acco Recommended for protecting sites via a link with a hardwired anti-intrusion alarm as well as for technical monitoring of sites, without having to rely on the electrical power supply. ✦ 5-year llithium battery supply. ✦ Hardwired links with monitored devices. ✦ Call back control. ✦ Listen-in / talk back. ✦ Powered by (2 x 3,6 V / 18 Ah) lithium battery pack (BatLi23 supplied). failsafe radio transmission () 7 G S M C O M M U N I C AT O R S COMMON FUNCTIONS C O M M O N T E C H N I C A L F E AT U R E S ✦ Programming: • Programming protected by access code. • Simple and intuitive programming using keypad and LCD screen. • Programming possible by PC via RS232 series connection. • Programming saved in communicator memory and on SIM card. • Parameter settings can be copied to other GSM communicators using SIM card. • Voice synthesis and messages pre-registered in 6 languages (F, GB, I, E, D, NL). • Welcome and alarm voice messages can be personalised. • Transmission of voice and/or SMS messages. • Transmission of digital messages (Ademco, Contact ID and Daitem protocols). • Selectable delay in transmitting alarm messages (0, 20, 40, 90 seconds), and immediate transmission of confirmed intrusion alarms. ✦ Call numbers: • Directory of 9 call numbers defined by the user: - 5 numbers for each relay input (activation and deactivation of each input), - 2 numbers for test call cycle (test call, Daitem radio alarm system arming/disarming), - 5 numbers for GSM communicator monitoring (anti-tamper system, power low, etc.) and for alarms sent from a Daitem alarm system. • Call cycle renewed 5 times, with acknowledgement and termination possible during cycle. • Listen-in function and alarm confirmation call can be programmed separately for each number. • Call numbers comprising up to 20 digits max. ✦ Remote control: • Can be programmed separately for each number and each communicator following an alarm confirmation call. • Permanent access for products with an external power supply. • Commands possible: - GSM communicator relay output command, - telephone number change, - listen-in and talk-back (speak-out), - status of GSM communicator inputs, - control of Daitem alarm system (arm/disarm, system status, last alarm) using 470-21X communicator, - control of one or two Daitem radio receivers using 470-21X model. • Function protected by access code. ✦ Inputs: • 4 dry contact type, programmable inputs: - normally open (NO) or normally closed (NC), - input type (sensor, telephone line cut detector, arm/disarm validation), - filtering time before programmable call. • Extension to up to 8 inputs possible using 901-21X board for 450-21X model. ✦ Outputs: • 2 dry contact type, programmable outputs: - switch or timer mode (can be programmed from 1 sec. to 10 hours). • Extension to up to 4 outputs possible using 901-21X board for 450-21X model. ✦ Built-in microphone and loudspeaker for: - recording personalised messages (10 sec. for welcome message + 3 sec. for each message associated with an input), - remote listen-in to premises, - remote talk-back or speak-out. ✦ Programming keypad with 16 keys (mobile phone type). ✦ Monitoring of power supply status and transmission of message in case of power failure. ✦ Anti-tamper protection against opening and removal. ✦ Events memory: 100. ✦ Built-in programming and use of communicator in 6 languages: French, Italian, German, Spanish, English and Dutch*. ✦ Automatic summer / winter daylight saving time change for programmed cyclic status calls. ✦ Degree of protection: IP 30. ✦ Operating temperature: -10°C to + 55°C. ✦ GSM antenna built-in to communicator with additional input for external antenna. ✦ Dimensions (W x H x D): 253 x 195 x 53 mm. ✦ Weight: 695 g (without battery). GSM SUBSCRIPTIONS AND NETWORK ACCESS ✦ Daitem GSM communicators include a GSM module requiring the user to subscribe to a mobile telephone operator. ✦ The operator should be chosen locally to ensure the best transmission conditions. 8 ✦ Power supply: - 3,6 V / 700 mAh lithium-ion battery (supplied), recharged via transformer or lithium battery pack (supplied), - consumption during calls: 500 mA, - consumption in standby mode: 180 µA (lithium pack) or 40 mA (external power supply), - battery life before recharging: 1 to 3 days. ✦ LCD screen with back-lighting. ✦ SIM card not supplied. () ✦ Quad-band GSM Modem. ✦ It is up to the user to make sure their contract with the chosen service company is valid. Specific precautions: Daitem shall not be held liable for any problems with communicator calls reaching their destination due to the unavailability of the mobile phone network. () 9 ACCESSORIES ACCESSORIES 901-21X EXTENSION BOARD 4 INPUTS / 2 OUTPUTS 906-21X Increases the number of inputs and outputs (only applies to 450-29X communicator). Casing to be used when installing the communicator in dusty environments. 902-21X 902-21U PROTECTIVE CASING (version with europeen standard mains plug) (version with UK mains plug) 230 V / 9 V DC MAINS SUPPLY 907-21X Transformer to power GSM communicator via mains (compatible with battery and mainspowered models). Software and serial link cable for programming the communicator via a computer. Software available in 6 languages: PROGRAMMING KIT French, Italian, German, Spanish, English and Dutch. 903-21X 5 DB GSM ANTENNA ON BRACKET 908-21X Improves the quality of the GSM signal reception for locations where the signal is weak. 3,6 V / 700 mAh. LITHIUM-ION BATTERY 904-21X MAGNETIC 3 DB EXTERNAL GSM ANTENNA BatLi23 Improves the quality of the GSM signal reception for locations where the signal is weak. 2 x 3,6 V / 18 Ah. LITHIUM PACK 905-21X PSTN TELEPHONE LINE CUT DETECTOR 801-99X Linked to the communicator and PSTN line, it detects any cut in the telephone line lasting longer than 2 min. Requires 12 V power supply (not provided). Serial-USB adapter enabling the programming software to be used on computers fitted only with USB ports and no serial ports. SERIAL-USB ADAPTER ( ) 10 ( ) 11