Monter votre planche

Transcription

Monter votre planche
Monter votre planche
Set up your board
2
1
Avant de fixer votre strap, placez le petit strap
lock “côté fin” du strap. Enfilez le strap lock
dans le strap en passant la sangle velcro
dans le passage prévu.
Votre équipement comprend :
2 straps, 4 strap locks différents et 4 vis.
Your set equipment includes:
2 straps, 2 small strap locks and 4 screws.
Before fixing your strap, place the little strap lock on
the narrow side of the strap. Insert the strap lock in
the strap and pass the velcro in the appropriate hole.
4
3
Positionnez le strap sur la planche :
la partie la plus fine côté extérieur du pied,
la partie la plus large côté intérieur du pied.
Côté large du strap, la rondelle inox vient
se placer sur la rondelle en plastique.
Serrer les vis.
Place the strap on the board: the narrowest part
on the outside of the foot, the largest part
on the inside of the foot. Put the strap lock
in the neoprene pocket.
The stainless steel washer goes on the plastic washer
for the screw on the wide side of the strap.
Mount the screws in.
5
6
Régler la hauteur du strap en fonction
de votre pointure en faisant glisser le strap
sur le strap lock à l’aide des velcros.
Set up the height of the strap
for your size by gliding the strap
over the strap lock.
www.f-onekites.com
Votre strap est monté.
Your strap is mounted....

Documents pareils

set up your board

set up your board Because of the asymmetric fin profile, the fins are color coded (red and green) to facilitate their assembly. The matching color is also present inside the fin holes on all of our twin tip boards. ...

Plus en détail