Catalogue - Frigoterm

Transcription

Catalogue
We make it
easy
At AKO we strive every day to provide our customers with complete
integrated solutions for the control and monitoring of industrial and
commercial refrigeration systems.
• Optimising the system’s energy consumption, reducing electricity
expense and maximising the return on the installation of integrated industrial refrigeration
• Managing the cold chain reliably and safely, to ensure food retains
all its nutritional properties.
• Integrating our solutions and products into the system, to provide
maximum usability with an innovative design.
• Guaranteeing the health and safety of consumers and employees of
industrial and commercial refrigeration systems.
• Respecting the environment with less energy-intensive solutions meeting all legal requirements.
earnings
joint business
AKO solutions optimise both energy savings and the overall installation
cost.
assessment
advice
With customer needs becoming more and more critical, AKO’s experience
allows us to research and develop reliable high added-value solutions.
support
tools
Because the customer demands more and more, our team of professionals
provides complete support: from joint project design to commissioning.
you
passion
for the
customer
The passion we feel for our customers drives AKO to keep innovating and
developing solutions for integrated control and monitoring of industrial and
commercial refrigeration.
AKOSYS
Integral system for the control and monitoring
of industrial and commercial refrigeration
Energy Saving
Usability
AKOTRACE
Integral System for Control and Monotoring
Temperature by Heating Cable Solutions
Connectivity
Safety &
security
AKOSOFT
AKODUO
AKOCAM
AKOCONTROL
The most open and
flexible software
The new generation of controllers
for compressor racks
The most complete solution
for cold room store
The most suitable range
of temperature and humidity control
AKOPRO
AKOCABLE
of controls panels
Heating Cable Solutions
® Electrical Tracing
NEWS
ITC/3701/2006 APPROVED DATA LOGGERS
A solution for capturing, storing and recording above and below freezing temperatures in cold rooms, in compliance with Metrology Control ITC/3701/2006 and subject to periodic verification.
DARWIN CONTROLLERS
The right combination for each solution.
AKOKIT
A heating cable solution for the industrial, security and home automation sectors.
FAMILY
AKOSOFT
Page 10
Software
GSMAlarm
Accesories
AKODUO
Page 14
AKOKIT
Page 16
Thermostats, Small Format
Temperature Controllers, Panel Mounting
Temperature Controllers, wall Mounting
Temperature Controllers, DIN Rail Mounting
Large Frontal Temperature Controllers
Solar Energy Thermometers
AKOTIM - Modular Controls (HACCP)
Compressors Pack Controls
PID Controllers
Probes and Accessories
AKOCAM
CAMCtrl – Controllers for Cold Room Stores
CAMAlarm – Alarms for Cold Room Stores
CAMRegis – Data-loggers
CAMRegis.H – Approved Data Loggers
Page 64
Kit for Pipes
Kit for Tanks and Hopper Walls
Kit for Underfloor Heating
Kit for Roofs and Drainage Channels
Solutions for Refrigeration
AKOPRO
Page 68
PROPLAS – Plastic Line Electrical Panels
PROMETAL – Metal Line Electrical Panels
PROPLUS – CAM Line Electrical Panels
AKOELEC
Page 44
Page 74
Alarms for Lifts
Detectors and Timers
AKOTUBOS – Protectors for Fluorescent Lamps
AKONIVEL
Switches for Liquids
Switches for Solids
Liquid Control Relays
General conditions of sale
Families
Warranty conditions
6
Page 50
Constant Wattage Parallel Cable and Element
Self-regulating Parallel Cable
Series Cable
Drum and Tank Heaters
Accesories
DUOControl
DUOVision
Accesories
AKOCONTROL
AKOCABLE
Page 80
www.ako.com
LIST OF REFERENCES
Reference
Family
AKO-10123
1510
AKO-10223
1510
AKO-10323
Pack
Page
Reference
Family
Pack
10 Us. 26
AKO-14921
1580
10 Us. 26
AKO-14922
1580
1510
10 Us. 27
AKO-15223
AKO-1212
2110
100 m (A) 51
AKO-12192
2190
AKO-12193
2190
AKO-1221
AKO-122906
AKO-12292
AKO-13012
Page
Reference
Family
Pack
Page
1 U. 43
AKO-15597
1590
1 U. 42
1 U. 43
AKO-15599
1590
1 U. 39
1530
6 Us. 34
AKO-15601
1590
1 U. 42
AKO-15224
1530
6 Us. 33
AKO-15602
1590
1 U. 42
1 U. 51
AKO-15225
1530
6 Us. 32
AKO-15613
1510
1 U. 45
1 U. 51
AKO-15226
1530
6 Us. 32
AKO-156131
1510
1 U. 45
2120
100 m (A) 55
AKO-15227
1530
6 Us. 32
AKO-15633
1510
1 U. 45
2190
1 U. 55
AKO-1530
1530
5 Us. 39
AKO-156331
1510
1 U. 45
2190
1 U. 55
AKO-15301A
1530
1 U. 39
AKO-156332
1510
1 U. 49
1510
12 Us. 17
AKO-15400
1535
1 U. 28
AKO-15640
1510
1 U. 46
AKO-13020
1510
12 Us. 17
AKO-15401
1535
1 U. 30
AKO-15643
1510
1 U. 46
AKO-13023
1510
12 Us. 17
AKO-15402
1535
1 U. 30
AKO-15663
1510
1 U. 46
AKO-13112
1510
12 Us. 17
AKO-15403
1535
1 U. 30
AKO-156631
1510
1 U. 46
AKO-13120
1510
12 Us. 17
AKO-15410
1535
1 U. 29
AKO-156632
1510
1 U. 49
AKO-13123
1510
12 Us. 17
AKO-15413
1535
1 U. 29
AKO-15673
1510
1 U. 46
AKO-14327
1530
12 Us. 33
AKO-15415
1535
1 U. 29
AKO-15703
1590
10 Us. (B) 48
AKO-14412-RC
1510
12 Us. 20
AKO-15430
1535
1 U. 29
AKO-15740
1570
1 U. 48
AKO-14423-RC
1510
12 Us. 20
AKO-15437
1535
1 U. 29
AKO-15742
1570
1 U. 48
AKO-14532
1510
12 Us. 30
AKO-15440
1535
1 U. 28
AKO-15750
1570
1 U. 48
AKO-14534
1510
12 Us. 30
AKO-15450
1535
1 U. 28
AKO-15752
1570
1 U. 48
AKO-14540
1510
1 U. 38
AKO-15451
1535
1 U. 30
AKO-15762
1570
1 U. 48
AKO-14602
1510
10 Us. 22
AKO-15452
1535
1 U. 30
AKO-15767
1570
1 U. 48
AKO-14605
1510
12 Us. 21
AKO-15453
1535
1 U. 30
AKO-17204
1550
1 U. 69
AKO-14610
1510
10 Us. 22
AKO-15460
1535
1 U. 29
AKO-17206
1550
1 U. 69
AKO-14612
1510
10 Us. 22
AKO-15463
1535
1 U. 29
AKO-17210
1550
1 U. 69
AKO-14615
1510
12 Us. 21
AKO-15465
1535
1 U. 29
AKO-17212
1550
1 U. 69
AKO-14632
1510
10 Us. 23
AKO-15480
1535
1 U. 29
AKO-17214
1550
1 U. 69
AKO-14642
1510
10 Us. 23
AKO-15487
1535
1 U. 28
AKO-17216
1550
1 U. 69
AKO-14721
1530
12 Us. 31
AKO-15490
1535
1 U. 28
AKO-17218
1550
1 U. 69
AKO-14722
1530
12 Us. 34
AKO-15561
1590
10 Us. 42
AKO-17222
1550
1 U. 69
AKO-14723
1530
12 Us. 34
AKO-155801
1590
10 Us. 42
AKO-17225
1550
1 U. 69
AKO-14723/01
1530
12 Us. 38
AKO-155802
1590
10 Us. 42
AKO-17229
1550
1 U. 69
AKO-14724
1530
12 Us. 31
AKO-155803
1590
10 Us. 42
AKO-17304
1550
1 U. 69
AKO-14725
1530
12 Us. 31
AKO-155807
1590
10 Us. 42
AKO-17306
1550
1 U. 69
AKO-14726
1530
12 Us. 31
AKO-155815
1590
5 Us. 42
AKO-17310
1550
1 U. 69
AKO-14801
1530
10 Us. 32
AKO-15582
1590
1 U. 42
AKO-17311
1550
1 U. 69
AKO-14901
1590
48 Us. 42
AKO-155830
1590
1 U. 42
AKO-17314
1550
1 U. 69
AKO-14902
1590
48 Us. 42
AKO-15584
1590
1 U. 42
AKO-17315
1550
1 U. 69
AKO-14903
1590
48 Us. 42
AKO-15585A
1590
1 U. 42
AKO-17316
1550
1 U. 69
AKO-14906
1590
24 Us. 42
AKO-15586
1590 100 m. (A) 42
AKO-17318
1550
1 U. 69
AKO-14910
1590
120 Us. (B) 41
AKO-15587
1590
1 U. 42
AKO-17322
1550
1 U. 69
AKO-14915
1590
1 U. 41
AKO-15589
1590
10 Us. 43
AKO-17329
1550
1 U. 69
AKO-14916
1580
1 U. 43
AKO-15590
1590
12 Us. 38
AKO-17506
1550
1 U. 70
AKO-14917
1580
6 Us. 11
AKO-155908
1590
10 Us. 41
AKO-17507
1550
1 U. 70
AKO-14918
1580
10 Us. 43
AKO-15595
1590
5 Us. 39
AKO-17508
1550
1 U. 70
AKO-14920
1580
1 U. 43
AKO-15596
1590
1 U. 39
AKO-17510
1550
1 U. 70
7
Reference
Family
Pack
AKO-17511
1550
AKO-17512
1550
AKO-17609
Reference
Family
Reference
Family
1 U. 70
AKO-53114
3315
1 U. 70
AKO-53120
3315
12 Us. 82
AKO-71120
2110
100 m (A) 55
12 Us. 82
AKO-71130
2110
1550
1 U. 71
AKO-53124
100 m (A) 55
3315
1 U. 82
AKO-71135
2110
AKO-17610
1550
1 U. 71
100 m (A) 55
AKO-53125
3315
1 U. 82
AKO-71150
2110
100 m (A) 55
AKO-17611
1550
AKO-17612
1550
1 U. 71
AKO-53126
3315
1 U. 82
AKO-71212
2120
– 56
1 U. 71
AKO-53127
3315
1 U. 82
AKO-71214
2120
AKO-17613
– 56
1550
1 U. 71
AKO-53161
3315
1 U. 83
AKO-71216
2120
– 56
AKO-17614
1550
1 U. 71
AKO-53162
3315
1 U. 83
AKO-71218
2120
– 56
AKO-17615
1550
1 U. 71
AKO-53165
3315
1 U. 83
AKO-71219
2120
– 56
AKO-17616
1550
1 U. 71
AKO-53166
3315
1 U. 83
AKO-71241
2120
– 56
AKO-17617
1550
1 U. 71
AKO-53171
3310
6 Us. 81
AKO-71243
2120
– 56
AKO-17618
1550
1 U. 71
AKO-53172
3310
6 Us. 81
AKO-71245
2120
– 56
AKO-17619
1550
1 U. 71
AKO-53173
3310
18 Us. 81
AKO-71248
2120
– 56
AKO-17620
1550
1 U. 71
AKO-53181
3310
12 Us. 81
AKO-71250
2120
– 57
AKO-17621
1550
1 U. 71
AKO-53182
3310
12 Us. 81
AKO-71251
2120
– 57
AKO-17622
1550
1 U. 71
AKO-53183
3310
12 Us. 81
AKO-71252
2120
– 57
AKO-17623
1550
1 U. 71
AKO-53184
3310
12 Us. 81
AKO-71253
2120
– 57
AKO-17624
1550
1 U. 71
AKO-53185
3310
12 Us. 81
AKO-712545
2110
100 m (A) 52
AKO-21006
1560
1 U. 15
AKO-53186
3310
12 Us. 81
AKO-71255
2120
– 57
AKO-21012
1560
1 U. 15
AKO-53187
3310
12 Us. 81
AKO-71258
2120
– 57
AKO-21018
1560
1 U. 15
AKO-53188
3310
12 Us. 81
AKO-71261
2120
– 57
AKO-21701
1560
1 U. 15
AKO-5330
3320
12 Us. 84
AKO-71263
2120
– 57
AKO-21901
1560
1 U. 15
AKO-5335
3320
6 Us. 84
AKO-71265
2120
– 57
AKO-21902
1560
1 U. 15
AKO-5404C
4400
12 Us. 76
AKO-71267
2120
– 57
AKO-21904
1580
1 U. 15
AKO-54041A
4400
12 Us. 76
AKO-71270
2120
– 58
AKO-5002
1580
1 U.
11
AKO-54043
4400
12 Us. 76
AKO-71271
2120
– 58
AKO-5004
1580
1 U. 11
AKO-5405A
4400
12 Us. 76
AKO-71275
2120
– 58
AKO-5005
1580
1 U. 11
AKO-5406
4400
24 Us. 77
AKO-71279
2120
– 58
AKO-5006
1580
1 U.
11
AKO-54061
4400
12 Us. 77
AKO-71281
2190
1 U. 56
AKO-5008H
1580
1 U. 11
AKO-5409A
4400
8 Us. 76
AKO-71282
2190
1 U. 56
AKO-52041
1580
1 U. 12
AKO-5413
4400
6 Us. 77
AKO-71283
2190
1 U. 58
AKO-52062
4200
1 U. 47
AKO-54301
1530
12 Us. 41
AKO-71285
2190
1 U. 56
AKO-52063
4200
5 Us. 47
AKO-5442B
4240
12 Us. 78
AKO-71286
2190
1 U. 56
AKO-520631
4200
1 U 47
AKO-54426
4240
6 Us. 78
AKO-71287
2190
1 U. 56
AKO-52064
4200
5 Us. 47
AKO-549505
4200
25 Us. (B) 77
AKO-71301A
2130
1 U. 58
AKO-520641
4200
1 U. 47
AKO-5605A
4200
1 U. 75
AKO-71302A
2130
1 U. 58
AKO-52092
4200
4 Us. 75
AKO-617089
4100
25 Us. (B) 79
AKO-71321
2130
1 U. 59
AKO-5231
2110
100 m (A) 51
AKO-617097
4100
25 Us. (B) 79
AKO-71323
2130
1 U. 59
AKO-5234
2110
150 m (A) 52
AKO-61904
4100
25 Us. (B) 79
AKO-71325
2130
1 U. 59
AKO-52341
2110
150 m (A) 53
AKO-619901
4100
50 Us. (B) 79
AKO-71515
2150
1 U. 59
AKO-52342
2110
150 m (A) 52
AKO-619902
4100
50 Us. (B) 79
AKO-71535
2150
1 U. 59
AKO-52344
2110
150 m (A) 52
AKO-619907
4100
50 Us. (B) 79
AKO-71611
2190
1 U. 62
AKO-52346
2110
75 m (A) 52
AKO-70115
2110
100 m (A) 54
AKO-71612
2190
1 U. 62
AKO-5237
2110
100 m (A) 54
AKO-70130
2110
100 m (A) 54
AKO-71617
2190
1 U. 62
5 Us. 62
Page
Pack
Page
Pack
Page
AKO-5238
2190
25 Us. 51
AKO-70140
2110
50 m (A) 54
AKO-71620
2190
AKO-52383
2190
25 Us. 52
AKO-70192
2190
10 Us. (B) 54
AKO-71625
2190
5 Us. 62
AKO-5239
2190
25 Us. 55
AKO-70194
2190
5 Us. 54
AKO-71628
2190
20 Us. (B) 62
AKO-52401
2190
1 U. 63
AKO-71010
2110
100 m (A) 53
AKO-71629
2190
1 U. 62
AKO-52402
2190
100 Us. 63
AKO-71015
2110
100 m (A) 53
AKO-71630
2190
1 U. 62
AKO-52403
2190
1 U. 63
AKO-71025
2110
100 m (A) 53
AKO-71635
2190
10 Us. (B) 62
AKO-52404
2190
100 Us. 63
AKO-71035
2110
100 m (A) 53
AKO-71658
1530
1 U. 40
AKO-5255A
4240
10 Us. 78
AKO-71050
2110
100 m (A) 53
AKO-71659
1530
1 U. 40
AKO-5256A
4240
10 Us. 78
AKO-71092
2190
1 U. 53
AKO-71660
1530
1 U. 40
AKO-53112
3315
25 Us. 82
AKO-71110
2110
100 m (A) 55
AKO-71661
1530
1 U. 40
8
www.ako.com
Reference
Family
Pack
Page
Reference
Family
Pack
Page
Reference
Family
Pack
Page
AKO-71666
2190
1 U. 62
AKO-D14918
1580
10 Us. 43
AKOTIM-11ARTE
1520
12 Us. 35
AKO-712699
2190
5 Us. 62
AKO-D16323
1510
12 Us. 20
AKOTIM-11ARTEB
1520
12 Us. 35
AKO-717425
2190
1 U. 39
AKO-DH-3M3-METAL 2200
1 U. 66
AKOTIM-11ATE
1520
12 Us. 35
AKO-717440
2190
1 U. 62
1 U. 66
AKOTIM-11TE
1520
12 Us. 35
AKO-717441
2190
5 Us. 62
1 U. 66
AKOTIM-12ARTE
1520
12 Us. 35
AKO-717445
2190
1 U. 62
AKO-DH-2M3-PLAST 2200
1 U. 66
AKOTIM-12ARTEB
1520
12 Us. 35
AKO-71751
2190
1 U. 62
1 U. 66
AKOTIM-12ATE
1520
12 Us. 35
AKO-718510
2150
1 U. 61
1 U. 66
AKOTIM-12TE
1520
12 Us. 35
AKO-718520
2150
1 U. 61
AKO-DV-1M3-METAL 2200
1 U. 66
AKOTIM-13ARTE
1520
12 Us. 36
AKO-718720
2150
1 U. 61
1 U. 66
AKOTIM-13ARTEB
1520
12 Us. 36
AKO-80004A
1590
1 U. 41
1 U. 66
AKOTIM-13ATE
1520
12 Us. 36
AKO-80008
1590
1 U. 42
AKO-DV-10M3-METAL2200
1 U. 66
AKOTIM-13TE
1520
12 Us. 36
AKO-80013
1590
1 U. 30
AKO-DV-1M3-PLAST 2200
1 U. 66
AKOTIM-21ARTE
1520
6 Us. 36
AKO-80014A
1590
1 U. 43
1 U. 66
AKOTIM-21ARTEB
1520
6 Us. 36
AKO-80015
1590
1 U. 40
1 U. 66
AKOTIM-21ATE
1520
6 Us. 36
AKO-80016
1590
1 U. 40
1 U. 66
AKOTIM-21TE
1520
6 Us. 36
AKO-80018
1580
1 U. 43
AKO-EC-100
2200
1 U. 67
AKOTIM-22ARTE
1520
6 Us. 37
AKO-80019
1590
1 U. 42
AKO-EC-150
2200
1 U. 67
AKOTIM-22ARTEB
1520
6 Us. 37
AKO-80020
1590
1 U. 40
AKO-EC-200 2200
1 U. 67
AKOTIM-22ATE
1520
6 Us. 37
AKO-80024
1580
1 U. 11
AKO-EC-250 2200
1 U. 67
AKOTIM-22TE
1520
6 Us. 37
AKO-80025
1510
25 Us. 27
AKO-EC-300 2200
1 U. 67
AKOTIM-23ARTE
1520
6 Us. 37
AKO-80030
1590
1 U. 40
AKO-EH-10
2200
1 U. 65
AKOTIM-23ARTEB
1520
6 Us. 37
AKO-80031
1590
1 U. 40
AKO-EH-20
2200
1 U. 65
AKOTIM-23ATE
1520
6 Us. 37
AKO-80032
1510
25 Us. 27
AKO-EH-40
2200
1 U. 65
AKOTIM-23TE
1520
6 U 37
AKO-80033
1590
25 Us. 29
AKO-EH-80
2200
1 U. 65
AKO-TOLVA-5M2
2200
1 U. 66
AKO-80034T
2150
2 Us. 60
AKO-MPC-4M
2200
1 U. 67
AKO-TOLVA-12M2
2200
1 U. 66
AKO-80035T
2150
1 U. 60
AKO-MPC-8M
2200
1 U. 67
AKO-TOLVA-20M2
2200
1 U. 66
AKO-80036T
2150
1 U. 60
AKO-MPC-12M
2200
1 U. 67
AKO-TOLVA-30M2
2200
1 U. 66
AKO-80037T
2150
1 U. 60
AKO-SAFE-5M
2200
1 U. 65
AKO-TUBO08T
4100
125 Us. (B) 79
AKO-80039
1580
1 U. 11
AKO-SC-20M2
2200
1 U. 67
AKO-TUBO13T
4100
125 Us. (B) 79
AKO-80040
1590
1 U. 30
AKO-SC-40M2
2200
1 U. 67
AKO-TUBO14T
4100
125 Us. (B) 79
AKO-80041
2150
1 U. 60
AKO-SC-60M2 2200
1 U. 67
AKO-TUBO15T
4100
25 Us. (B) 79
AKO-ACS-10
1520
1 U. 65
AKO-SC-80M2
2200
1 U. 67
AKO-TUBO18T
4100
25 Us. (B) 79
AKO-ACS-20
2200
1 U. 65
AKO-SC-100M2
2200
1 U. 67
AKO-TUBO18B
4100
25 Us. (B) 79
AKO-ACS-40
2200
1 U. 65
AKO-SE-10M2
2200
1 U. 66
AKO-TUBO18G
4100
25 Us. (B) 79
AKO-ACS-80
2200
1 U. 65
AKO-SE-20M2
2200
1 U. 66
AKO-TUBO18R
4100
25 Us. (B) 79
AKO-CANAL-50M
2200
1 U. 67
AKO-SE-40M2
2200
1 U. 66
AKO-TUBO18V
4100
25 Us. (B) 79
AKO-CANAL-100M
2200
1 U. 67
AKO-SE-60M2
2200
1 U. 66
AKO-TUBO20T
4100
25 Us. (B) 79
AKO-CANAL-150M
2200
1 U. 67
AKO-SR-5M2
2200
1 U. 66
AKO-TUBO21T
4100
125 Us. (B) 79
AKO-CANAL-200M
2200
1 U. 67
AKO-SR-10M2
2200
1 U. 66
AKO-TUBO28T
4100
125 Us. (B) 79
AKO-D14012
1510
12 Us. 18
AKO-SR-20M2
2200
1 U. 66
AKO-TUBO35T
4100
125 Us. (B) 79
AKO-D14023
1510
12 Us. 18
AKO-TEJADO-15M
2200
1 U. 67
AKO-TUBO36T
4100
25 Us. (B) 79
AKO-D14023-C
1510
12 Us. 18
AKO-TEJADO-30M
2200
1 U. 67
AKO-TUBO36B
4100
25 Us. (B) 79
AKO-D14112
1510
12 Us. 18
AKO-TEJADO-45M
2200
1 U. 67
AKO-TUBO36G
4100
25 Us. (B) 79
AKO-D14120
1510
12 Us. 18
AKO-TEJADO-60M
2200
1 U. 67
AKO-TUBO36R
4100
25 Us. (B) 79
AKO-D14123
1510
12 Us. 18
AKO-TI10-METAL
2200
1 U. 65
AKO-TUBO36V
4100
25 Us. (B) 79
AKO-D14123-2
1510
12 Us. 18
AKO-TI20-METAL
2200
1 U. 65
AKO-TUBO40T
4100
25 Us. (B) 79
AKO-D14123-2-RC 1510
12 Us. 18
AKO-TI40-METAL
2200
1 U. 65
AKO-TUBO58T
4100
25 Us. (B) 79
AKO-D14212
1510
12 Us. 19
AKO-TI80-METAL
2200
1 U. 65
AKO-TUBO58B
4100
25 Us. (B) 79
AKO-D14223
1510
12 Us. 19
AKO-TI10-PLAST
2200
1 U. 65
AKO-TUBO58G
4100
25 Us. (B) 79
AKO-D14312
1510
12 Us. 19
AKO-TI20-PLAST
2200
1 U. 65
AKO-TUBO58R
4100
25 Us. (B) 79
AKO-D14323
1510
12 Us. 19
AKO-TI40-PLAST
2200
1 U. 65
AKO-TUBO58V
4100
25 Us. (B) 79
AKO-D14323-C
1510
12 Us. 19
AKO-TI80-PLAST
2200
1 U. 65
AKO-TUBO65T
4100
25 Us. (B) 79
* News in red
(A) The metres of packaged material are the standard ones; however, we reserve the right to supply in different lengths to those indicated.
(B) Minimum, indivisible pack units.
9
AKOSOFT
The most open and
flexible software
www.ako.com
AKOSOFT
AKOSOFT Communication and software
The most open, flexible communications system.
AKOSOFT has a wide range of software specifically developed for various
applications, such as for the management and monitoring of CAMRegis
and CAMRegis.H data loggers, management and monitoring of AKO
equipment via communication from a PC or webserver, configuration
and monitoring of AKODUO, as well as management of GSM alarm
modules.
•This management and monitoring software allows remote management of the facility from anywhere in the world.
- CD-ROM (AKO-5004) for PC installation.
- Webserver (AKO-5005) with integrated software application ready to connect to any intranet.
• En ambas versiones, el control de la instalación podrá ser:
- Local: allows monitoring of connected controllers in the system itself.
- Remoto: allows the local system to be monitored remotely (web environment)
• For remote monitoring, you need to access via a web browser, using the IP address of the PC or Webserver.
• To use this software to operate the various AKO devices, a communication hub will need to be set up based on a standard RS485 net
work (MODBUS protocol), connecting all devices to the PC or Webserver through an RS485/USB converter module (AKO-80039).
• Key Features:
- Connection of up to 127 devices.
- Programming parameters of the various connected devices.
- Real-time system monitoring by user-defined synoptic parameters.
- Logging of temperatures and alarms.
- Data displayed in table and graphic format, exportable to Excel and PDF.
- Alarm message notification, both on screen and via e-mail.
AKOSOFT Compatilility:
AKO-5004/ AKO-5005: AKO-5006: AKO-5008H: AKOCONTROL, AKOCAM (CAMCtrl, CAMRegis, CAMAlarm y CAMCombi), AKOPRO (PROPlus) y AKODUO
AKODUO
CAMRegis.H, CAMRegis
Reference
Description
Family
Pack
AKO-5002
AKO-5004
AKO-5005
AKO-5006
AKO-5008H
AKO-80039
AKO-80024
AKO-14917
Software for selecting heating cable
Software for managing and monitoring units from PC
WEB server with communication by Ethernet
DUOAssistant, Software for offline AKODUO configuration
SOFTRegis, Software for managing and monitoring CAMRegis.H
Converter module USB/RS485
Repeater for RS485 communications systems
CMOS/RS485 converter module
1580
1580
1580
1580
1580
1580
1580
1580
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
6 Units
11
AKOSOFT
GSMAlarm
GSM module for alarm management.
When one of the four alarm inputs is triggered, the system sends an SMS to the
first telephone number configured.If after the period set by the user, a receipt
confirmation message is not received, it will automatically dial the next number
on the list. It also sends an SMS in the event of power and internal battery failure.
Application: Refrigeration installations, processing industry
• Applicable to any type of installation.
• All that is needed is a volt-free contact for the alarm signal.
• Fully user configurable (phone numbers, SMS text, waiting, confirmation and
attempt time settings, as well as the NO/NC alarm contact type), through SOFTgsm
PC software (included in price).
• Four independent alarm inputs (voltage-free contacts).
• Up to five phone numbers configurable per alarm.
• LED system status notification (alarms, GPRS coverage, power, etc).
• RS232 serial communication cable for PC connection.
• Rechargeable battery (12 hour autonomy) included.
• 230 V power supply.
Reference
AKO-52041
12
Description
Family
Pack
GSM alarm module with 4 inputs (SIM card not included)
1580
1 Unit
www.ako.com
13
AKODUO
The new generation of controllers
for compressor racks
www.ako.com
AKODUO
AKODUO Compressors and condensers station, up to 18 outputs
Energy savings through floating condensation.
Electronic controllers for regulating capacity in refrigeration stations, designed
for more efficient management. Regulation in proportional band and neutral
zone. Compressor rotation by operating hours. Up to 6 compressors can be
managed with 2 partialisations. They have a 4-20 mA output for controlling
the frequency variator of the condenser fans. Viewing of information on double
multi-colour graphic screen. Rapid, intuitive menus with programming assistance and help on screen. Reading and programming configurable by pressure or
temperature. Modular, robust system. Speed and ease of maintenance. Based
on PLC technology.
Application: Cold installations
•AKODUO: an electronic controller based on PLC technology for capacity regulation in cooling racks and condenser fans.
It comprises two units:
- DUOControl: efficiently manages the central unit, thanks to its floating condensing algorithm (DIN rail-mounted).
- DUOVisión: double-screen colour graphic display providing fast and accurate reading of all system variables.
• Key Features:
- Ajustment in the neutral zone or proportional band.
- Rotation of compressors by hours of operation or sequential activation.
- Control of fans by stages or by frequency variation
- Fast, user-friendly menus, grouped by functionality, with on-screen help and reading/programming wizard configurable by pressure
(bar) or temperature (°C).
- Energy saving via activation of floating condensation algorithm and double evaporation pressure setting.
Features:
AKO-21006
DIGITAL INPUTS
8
DIGITAL OUTPUTS
6
4-20 mA INPUTS
4-20 mA OUTPUTS
AKO-21012
AKO-21018
Function
10
12Three fixed for PA, PB and AUTO/MAN sel.
12
18
Compressors and Fans
3Two pressure probes (HP & LP) and one exterior temperature probe
1Fans controlled by variable frequency
• Integrated RS485 communications. MODBUS protocol
• Compatible gases: R22, R134 A, R404 A, R507 A, R717 A (NH3) y R744 A (CO2).
• 24 VDC supply
Reference
Description
Family
Pack
AKO-21006
AKO-21012
AKO-21018
AKO-21701*
AKO-21901
AKO-21902
AKO-21904**
AKO-5006
AKODUO 6 stages
AKODUO 12 stages
AKODUO 18 stages
AKODUO Vision, Viewer with double display, panel-mounted
Power supply 100-240 Vac/24 Vdc, 0,75 A
Power supply 100-240 Vac/24 Vdc, 1,25 A
Communication cable RS485 for AKODUO
DUOAsssitant, Software for off-line AKODUO configuration
1560
1560
1560
1560
1560
1560
1580
1580
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
* DUOVisión must be ordered together with DUOControl 6, 12 or 18.
** Required for connecting the AKODUO controller to the communication hub (see AKOSOFT range diagram).
15
AKOCONTROL
of temperature and humidity control
www.ako.com
AKOCONTROL
Thermometers Range from -50 ºC to +99 ºC, panel mounting, small format
Small dimensions 66 x 32 x 56 mm.
The size of the panel cut-outs make them exchangeable with the traditional
mechanical thermometers.
Password enabled for entering programming, indication in ¼C or ¼F programme-selectable and probe calibration.
Application: Industrial and commercial cold, displays, cabinets, etc.
•Temperature range -50 ºC to +99 ºC
•Display 2 Digits (ºC/ºF)
•Resolution 1 ºC
•Accuracy ±1 ºC
•NTC probe
•Panel cut-out dimensions 25.4 x 58 mm
•Front dimensions 32 mm x 66 mm
•Depth 51 mm
Reference
Description
Family
Pack
AKO-13012
AKO-13020
AKO-13023
12 V~, ºC / ºF per programme, probe 1.5 m
1510
1510
1510
12 Units
12 Units
12 Units
Thermostats Range from -50 ºC to +99 ºC, 1 relay, panel mounting, small format
Small dimensions 66 x 32 x 56 mm.
The dimensions of the panel cut-out make them exchangeable with traditional
mechanical thermometers, by also integrating the thermostat and defrost clock
function in a single unit. Programmable for cold and heat. Defrost by compressor stop. Possible password for entering programming, indication in ºC or ºF
programme-selectable and probe calibration.
Application: Industrial and commercial cold, displays, cabinets, etc.
• Temperature range -50 ºC a +99 ºC
• Display 2 Digits (ºC/ºF)
• Resolution 1 ºC
• Accuracy ±1 ºC
Probe
Reference
AKO-13112
AKO-13120
AKO-13123
• NTC probe
• Panel cut-out dimensions 25.4 x 58 mm
• Front dimensions 32 x 66 mm
• Depth 51 mm
Probe
Description
– relé SPST 16 A, NTC probe included
12V~,
120V~, relé SPST 16 A, NTC probe included
230V~, relé SPST 16 A, NTC probe included
Probe
Family
Pack
1510
1510
1510
12 Units
12 Units
12 Units
17
AKOCONTROL
Thermometers Range from -50 ºC to +150 ºC, panel mounting
Temperature display.
Temperature display in °C or °F with decimal point.NTC/PTC probe selectable by
programme. Allows probe calibration. A single button for adjusting parameters.
The AKO-14023-C model has integrated RS-485 communication.
Application: Industrial and commercial refrigeration, displays, incubators, vehicles, etc.
• With NTC probe, temperature range from -50.0 ºC to +99.9 ºC
• With PTC probe, temperature range from -50.0 ºC to +150 ºC
• 3-digit display (ºC/ºF)
• Resolution 0,1 ºC
• Panel cut-out dimensions 71 x 29 mm
• Front panel dimensions 79 x 38 mm
• Depth 43 mm (AKO-D14012 y AKO-D14023)
• Depth 61 mm (AKO-D14023-C)
Probe 1
Probe 1
Probe 1
Reference
Description
Family
Pack
AKO-D14012
AKO-D14023
AKO-D14023-C
12/24 Vac/dc, 1 NTC probe included
230V~, 1 NTC probe included
90-250 V~, with communication, 1 NTC probe included
1510
1510
1510
12 Units
12 Units
12 Units
Thermostats Range from -50ºC to +150ºC, 1 relay output, panel mounting
Programmable for cold and heat.
Programmable for cold and heat. Display and control in °C and °F with decimal
point. NTC/PTC probe selectable by programme. Possible password protection
for configuration. Defrost by compressor shutdown.
The AKO-14123-2-RC features an integrated RS-485 communication and realtime clock.
Configuration wizard depending on application (8 configurations).
Application: Industrial and commercial refrigeration, displays, incubators, vehicles, etc.
• With NTC probe, temperature range from -50.0 ºC to +99.9 ºC
• With PTC probe, temperature range from -50.0 ºC to +150 ºC
• 3-digit Display (°C/° F)
• Depth 43 mm (AKO-D14120 y AKO-D14123)
• Depth 61 mm (AKO-D14112 y AKO-D14123 y AKO-D14123-2-RC)
Probe 1
Reference
Description
AKO-D14112
AKO-D14120
AKO-D14123
AKO-D14123-2
AKO-D14123-2-RC
12/24 Vac/dc, 1 relay SPDT 16 A, 1 NTC probe included 1510 12 Units
120 V~, 1 relay SPST 16 A, 1 NTC probe included 1510 12 Units
230 V~, 1 relay SPST 16 A, 1 NTC probe included 1510 12 Units
230 V~, 1 relay SPDT 2 CV, 1 NTC probe included
1510 12 Units
90-250 V~, 1 SPDT 2 CV relay, communication and clock, 1 NTC probe included 1510 12 Units
18
Family
Pack
www.ako.com
AKOCONTROL
Temperature controller
Range -50 ºC to +99 ºC, 2 relays, panel mounting
Compressor and auxiliary relay (defrost or fans).
Auxiliary relay function programmable as Defrost, Fans, Alarm or Light. A 2nd
optional probe allows ending the defrost process by temperature.
Programmable digital inputs such as door switch, external alarm, remote
defrost, energy saving or continuous cycle.
Application: Industrial and commercial refrigeration, display cabinets, electrical
panels, etc.
•Temperature range -50.0 ºC to +99.9 ºC
•Resolution 0,1 ºC
•Accuracy ±1 ºC
•Panel cut-out dimensions 71 x 29 mm
•Front panel dimensions 79 x 38 mm
•Depth 61 mm
•Compressor relay SPST 16 A, 250 V, cosj= 1
•Relay R2 SPDT 8 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-D14212
AKO-D14223
12 V, 2 relays , 1 NTC probe included
230 V~, 2 relays, 1 NTC probe included
1510
1510
12 Units
12 Units
Temperature controllers Range from -50,0 ºC to +99,9 ºC, 3 relays, panel mounting
Compressor, fan and auxiliary relay.
Auxiliary relay programmable as Defrost, Alarm or Light. Defrosts programmable by
controlling compressor, resistances (or cycle reversal) and fans. A 2nd optional probe
allows defrosting by temperature. Programmable digital inputs such as door switch,
external alarm, remote defrost, energy saving or continuous cycle.
The AKO-14323-C model has integrated RS-485 communication.
panels, etc..
• Temperature range -50.0 ºC to +99.9 ºC
• Temperature range (ºC/ºF)
• Depth 61 mm
• Compressor relay SPDT 16 A, 250 V, cosj= 1
• Defrost relay SPST 6 A, 250 V, cosj= 1
• Auxiliary relay SPST 8 A, 250 V, cosj= 1
Reference
AKO-D14312
AKO-D14323
AKO-D14323-C
Description
Family
Pack
12 V, 3 relays, 1 1 NTC probe included
230 V~, 3 relays, 1 NTC probe included
90-250 V~, 3 relays, with communication, 1 NTC probe included
1510
1510
1510
12 Units
12 Units
12 Units
19
AKOCONTROL
Temperature controllers Range from -50 ºC to +99 ºC, 3 relays, modular
Compressor, fan, defrost and alarm relay.
Auxiliary relay programmable as an alarm, 2nd defrost, gas collection or light.
Defrost by heat, air or cycle reversal, programmable by controlling compressor,
resistances (or cycle reversal) and fans. Real-time clock for starting defrosts. A
2nd optional probe allows defrosting by temperature. Programmable digital
inputs such as door switch, external alarm, remote defrost, energy saving or
continuous cycle. Integrated RS-485 communications. Configuration wizard
depending on application (8 configurations).
panels, etc.
• 3-digit display (°C/°F)
• Resolution 0.1 °C
• Accuracy ±1 °C
• Panel cut-out size 71 x 29 mm
• Depth 61 mm
• Compressor relay SPST 6 A, 250 V, cosj= 1
• Fan relay SPST 6 A, 250 V, cosj= 1
• Defrost relay SPST 6 A, 250 V, cosj= 1
Reference
Description
AKO-D14412-RC
AKO-D14423-RC
12 V, 4 relays, with communication and clock, 1 NTC probe included
90-250 V~, 4 relays with communication and clock, 1 NTC probe included
Temperature controllers Range from -50.0 ºC to +99.9 ºC, 3
Family
Pack
151012 Units
151012 Units
relay, panel mounting
Large display. Relay for compressor, fans and defrost.
Defrosts programmable by controlling compressor, resistances (or cycle reversal)
and fans. A 2nd optional probe allows defrosting by temperature. Auxiliary relay
programmable as Defrost, Alarm or Light. Programmable digital inputs such as
door switch, external alarm, remote defrost, energy saving or continuous cycle.
Application: Industrial and commercial refrigeration, displays, incubators,
vehicles, etc.
•3-digit Display (°C/° F)
•Resolution 0.1 °C/Accuracy ± 1 °C
•Type of probe NTC
•Panel cut-out size 70.5 x 28.5 mm
•Front panel dimensions 75.8 x 33.8 mm
•Depth 61 mm
•Compressor relay SPDT 16 A, 250 V, cosj= 1
•Fan relay SPST 6 A, 250 V, cosj= 1
•Auxiliary relay SPST 16 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-D16323
90-260 V~, 3 relays, 1 NTC probe included
1512
12 Units
20
www.ako.com
AKOCONTROL
Thermometers Range from -50 ºC to +99 ºC, wall mounting
Temperature display.
NTC probe included in the kit, extendable with AKO-15586.
Fixing holes suitable for universal recessed box.
Application: Industrial and commercial refrigeration, cabinets, etc.
• Temperature range from -50 ºC to +99 ºC
• 2-digit display (°C/°F)
• Dimensions 80 x 120 x 37 mm
Probe 1
Reference
Description
Family
Pack
AKO-14605
230 V~, 1 NTC probe included
1510
12 Units
Thermostat Range -50 ºC to +99 ºC, 1 relay output, wall mounting
Display and control in °C and °F. Possibility of blocking parameters.
Defrost by compressor shutdown.
Fixing holes suitable for universal recessed box.
Application: Industrial and commercial refrigeration, displays, incubators,
vehicles, etc.
•Temperature range -50 °C to +99 °C
•2-digit display (°C/°F)
•Resolution 1 °C
•Accuracy ±1 °C
•Dimensions 80 x 120 x 37 mm
•Control relay SPST 16 A, 250 V, cosj= 1
Probe 1
Reference
Description
Family
Pack
AKO-14615
230 V~, 1 relay SPST 16 A, 1 NTC probe included
1510
12 Units
21
AKOCONTROL
Thermometers Range from -50 ºC to +150 ºC, wall mounting
NTC or PTC probe programme-selectable.
Temperature display in cold and heat applications.
Allows probe calibration, display in ºC or ºF and password to enter programming. Fixing holes adapted to universal embedding box.
Application: Industrial and commercial cold, cold rooms, industrial warehouses, etc.
• With NTC probe, temperature range from
-50.0 ºC to +99.9 ºC
• With PTC probe, temperature range from
-50.0 ºC to +150 ºC
•
•
•
•
Resolution 0,1 ºC
Accuracy ±1 ºC
Box dimensions 171 x 94 x 42 mm
Power supply 230 V~ ±10%, 50/60 Hz
Reference
Description
Family
Pack
AKO-14602
Thermometer 230 V~, 1 1 NTC probe included
1510
10 Units
Temperature controllers
Range from -50 ºC to +150 ºC, 1 relay, wall mounting
Programmable for cold and heat
NTC or PTC probe programme-selectable. Display and control with decimal
point. Wall mounting. Fixing holes adapted to universal embedding box.
Parameter protection by password. Indication in ºC o ºF
Application: Industrial and commercial cold, cold rooms stores, incubators, industrial warehouses, etc.
•With NTC probe, temperature range from
-50.0 ºC to +99.9 ºC
•With PTC probe, temperature range from
-50.0 ºC to +150 ºC
•Accuracy ±1 ºC
•Box dimensions 171 x 94 x 42 mm
•Control relay SPST 16 A, 250 V, cosj= 1
•Power supply 230 V~ ±10%, 50/60 Hz
Sonda
Probe
Reference
Description
Family
Pack
AKO-14610
AKO-14612
Controller 230 V~, 1 SPST relay, 1 NTC probe included
Controller 120 V~, 1 SPST relay, 1 NTC probe included
1510
1510
10 Units
10 Units
22
www.ako.com
AKOCONTROL
Temperature controllers Range from -50 ºC to +99 ºC, 3 relays, wall mounting
Defrost by electric heat, air or hot gas bypass.
Programmable defrost by regulating the compressor, resistances (or hot gas
bypass) and fans. With a 2nd optional probe, it enables defrost by temperature.
Password enabled for entering the programming. Indication in ºC o ºF selectable
by programme and probe calibration.
Application: Industrial and commercial cold, cold room stores, etc.
• NTC probe
• Box dimensions 171 x 94 x 42 mm
• Digital input for door contact.
• Compressor relay SPST 16 A, 250 V, cosj = 1
• Fan relay SPST 6 A, 250 V, cosj = 1
• Defrost relay SPDT 8 A, 250 V, cosj = 1
• Power supply 230 V~ ±10%,50/60 Hz
Reference
Description
Family
Pack
AKO-14632
Controller 230 V~, 3 relay, 1 NTC probe included
1510
10 Units
Temperature controllers Range from -50 ºC to +99 ºC, 4 relays, wall mounting
Configurable auxiliary relay
Defrost by electric heat, air or hot gas bypass, programmable by regulating the
compressor, resistances (or hot gas bypass) and fans. With a 2nd optional probe,
it enables defrost by temperature. Auxiliary relay configurable for indicating alarms,
defrost 2nd evaporator or solenoid control. Possible stop for pump down. Input for
independent temperature probe or defrost control in 2nd evaporator. Digital input
for door contact.
Application: Industrial and commercial cold, cold room stores, etc.
•Temperature range -50.0 ºC to +99.9 ºC
•Accuracy ±1 ºC
• NTC probe
•Compressor relay SPST 16 A, 250 V, cosj = 1
•Fan relay SPST SPST 6 A, 250 V, cosj = 1
• Defrost relay SPDT 8 A, 250 V, cosj = 1
• Auxiliary relay SPST 6 A, 250 V, cosj = 1
•Power supply 230V~ ±10%, 50/60 Hz
Reference
Description
Family
Pack
AKO-14642
Controller 230 V~, 4 relays, 1 NTC probe included
1510
10 Units
23
AKOCONTROL
Temperature controllers Range from -50 ºC to +99 ºC, 1 relay, DIN rail mounting
Defrost by compressor shutdown.
3 keys: Up, Down, Set. Possible password for entering programming, indication
in ºC o ºF programme-selectable and probe calibration. Input for independent
temperature probe. Digital input for door contact.
Application: Industrial and commercial cold, displays, electric panels, etc.
• Temperature range -50 ºC to +99 ºC
• NTC probe
Reference
• Power supply 230 V~ ±10%, 50/60 Hz
(4 DIN modules)
• Front part dimensions 42,2 x 66,2 mm
Description
Family
Pack
AKO-12123 / AKOTIM-21TE 230 V~, 1 relay SPST 16 A, 1 NTC probe included
1520
6 Units
Temperature controllers Range from -50 ºC to +99 ºC, 2 relays, DIN rail mounting
Compressor relay and R2 (defrost or fans).
3 keys: Up, Down, Set. Defrost by electric heat or air.
The 2nd relay allows one of the following options to be regulated:
- Defrost by electric heat
- Defrost by hot gas bypass
- Defrost by air
With a 2nd optional probe, it enables defrost by temperature. Possible password for
entering programming, indication inºC o ºF programme-selectable and probe calibration. Input for independent temperature probe. Digital input for door contact.
•Accuracy ±1 ºC
•NTC probe
Reference
• Power supply 230 V ~ ±10%, 50/60 Hz
(4 DIN modules)
•Front part dimensions 42,2 x 66,2 mm
•Compressor relay SPST 16A, 250V, cosj= 1
Description
Family
Pack
AKO-12223 / AKOTIM-22TE 230 V~, 2 relays (one 16 A), 1 NTC probe included
1520
6 Units
24
www.ako.com
AKOCONTROL
Temperature controllers Range from -50 ºC to +99 ºC, 3 relays, DIN rail mounting
Relay for compressor, fans and defrost.
3 keys: Up, Down, Set. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and fans.
With a 2nd optional probe, it enables defrost by temperature. Possible password for entering programming, indication in ºC o ºF programme-selectable and probe calibration. Input for independent temperature probe.
Digital input for door contact.
• Power supply 230 V ~ ±10%, 50/60 Hz
(4 DIN modules)
• Defrost relay SPDT 8 A, 250 V, cosj= 1
Reference
Descripction
Family
Pack
AKO-12323 / AKOTIM-23TE
230 V~, 3 relays (one 16 A), 1 NTC probe included
1520
6 Units
Range from -50 ºC to +99 ºC, 4 relays, DIN rail mounting
Relay for compressor, fans, defrost and alarm.
3 keys: Up, Down, Set. Defrost by electric heat, air or hot gas bypass, programmable by regulating the compressor, resistances (or hot gas bypass) and
fans. Defrost start triggered by clock in real time. With a 2nd optional probe, it
enables defrost by temperature. Additional relay for indicating alarms. Possible
password for entering programming, indication in ºC o ºF programme-selectable
and probe calibration. Input for independent temperature probe. Digital input
for door contact.
• NTC probe
(4 DIN modules)
• Fan relay SPST 6 A, 250 V, cosj = 1
• Alarm relay SPST 6 A, 250 V, cosj= 1
Reference
Descripction
Family
Pack
AKO-12423 / AKOTIM-23ARTE
230 V~, 4 relays (one 16 A), 1 NTC probe included
1520
6 Units
25
AKOCONTROL
Large frontal temperature controllers
2 relays, panel mounting
Compressor and light relay.
6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to
turn the unit on and off and light switch. Defrost by compressor
shutdown. Continuous cycle is possible. Password enabled for entering programming, programme-selectable indication in ºC o ºF Digital
input configurable for door contact, severe alarm, remote defrost,
change in set-point temperature
Application:
etc.
Industrial and commercial cold, displays, electric panels,
AKO-10123
*8 A
6
7
*16 A
8
N
LIGHT
9
10 11 12
N
COOL
N L
230 V~
13 14 15
DI1
S1 - TEM
• Resolution 0,1ºC
• NTC probe
• Box dimensions 149 x 30 x 57,7 mm
• Trim 179,9 x 37,9 mm
• Compressor relay SPST 16 A, 250 V, cosj=1
• Light relay SPDT 8 A, 250 V, cosj=1
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
Descripction
Family
Pack
AKO-10123
Controller 2 relays, 230 V~, 1 NTC probe included
1510
10 Units
Compressor relay, (defrost or fans) and light.
6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn
the unit on and off and light switch. Defrost by electric heat or by air
and possible continuous cycle. Password enabled for entering programming, programme-selectable indication in ºC o ºF Digital input
configurable for door contact, severe alarm, remote defrost, change
in set-point temperature
AKO-10223
*8 A
1
R2
2
*8 A
3
N
6
LIGHT
7
*16 A
8
N
9
COOL
10 11 12
N
N L
230 V~
13 14 15 16 17 18
DI1
S1 - TEM
DI2
S2 - DEF
•Temperature range (ºC/ºF)
•Accuracy ±1 ºC
•NTC probe
•Box dimensions 149 x 30 x 57,7 mm
•Trim 179,9 x 37,9 mm
•Light relay SPDT 8 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-10223
1510
10 Units
26
www.ako.com
AKOCONTROL
Compressor relay, defrost, fans and light.
6 keys: Up, Down, Set, Escape, Light and ON/OFF. Pushbutton to turn the unit on
and off and light switch. Defrost by electric heat or by air and possible continuous cycle. Password enabled for entering programming, programme-selectable
indication in ºC o ºF Digital input configurable for door contact, severe alarm,
remote defrost, adjustment temperature change.
AKO-10323
*8 A
1
DEF
2
*8 A
3
N
4
FAN
5
N
*8 A
6
LIGHT
7
*16 A
8
N
9
COOL
10 11 12
N
N L
230 V~
13 14 15 16 17 18
DI1
S1 - TEM
DI2
S2 - DEF
•Accuracy ±1 ºC
•NTC probe
•Box dimensions 149 x 30 x 57,7 mm
•Trim 179,9 x 37,9 mm
•Fan relays SPST 8 A, 250 V, cosj= 1
•Defrost relaySPDT 8 A, 250 V, cosj= 1
•Light relay SPDT 8 A, 250 V, cosj= 1
Reference
Description
AKO-10323
Family
Pack
1510
10 Units
Thermometers Range from -50 ºC to +70 ºC, panel mounting
Battery thermometers.
Temperature display in cold and heat applications.
Application: Industrial and commercial cold, displays.
AKO-80032
• Temperature range from -50 ºC to +70 ºC
• Display LCD
• Power supply: 1,5 V battery (G10)
• Size of the AKO-80025 48 x 28,6 x 14 mm
• Size of the AKO-80032 85,2 x 29,2 x 14,8 mm
AKO-80025
Reference
Description
Family
Pack
AKO-80025
AKO-80032
1,5 V Batteries (G10), probe 3 m
Solar power supply + 1,5 V batteries (G10), probe 2 m
1510
1510
25 Units
25 Units
27
AKOCONTROL
Range from -99,9 ºC to +1370 ºC, 48 x 48 format
Input for Pt100 probe, J and K thermocouple.
ON/OFF Control. Programmable for cold and heat.
With the 2 outputs, the controller can be used to work as a stage plus alarm.
Application: Ovens, electrical panels, industrial installations, etc.
• Temperature range with Pt100 probe
-99,9 ºC to +850,0 ºC
• Temperature range with J thermocouple
-99,9 ºC to +800,0 ºC
L
1
N
2
18
Reference
AKO-15440
AKO-15490
15
14
12
5
11
7
8
R2
13
4
6
+
SALIDA
ENTRADA
SSR
DIGITAL
SSR
DIGITAL
OUTPUT
INPUT
16
TOP
3
R1
17
Pt100
+
TC
10
9
• Temperature range with K thermocouple
-99,9 ºC to +1370 ºC
• Output control SSR 12 Vdc, max. 10 mA
• Front part dimensions 48 x 48 mm
• Depth 119 mm
• Relay R1 SPST 6 A, 250 V, cosj= 1
• Relay R2 SPDT 5 A, 250 V, cosj= 1
Description
_
ON/OFF controller with power supply from 20 to 48 V~
ON/OFF controller with power supply from 100 to 240 V~
Family
Pack
1535
1535
1 Unit
1 Unit
PID controller, 48 x 48 format Range from -99,9 ºC to +1370 ºC
Input for Pt100 probe, Thermocouple J and K, 4-20mA
Programmable for cold and heat. Controller PID or ON/OFF programme-selectable.
Self-tuning function. Probe input configurable as Pt100, thermocouple J and K,
4-20mA. With the 2 outputs, the controller can be used to work as a stage plus
alarm. Digital input configurable for SetPoint change or start-stop of the unit.
•Temperature range with Pt100 probe
-99,9 ºC to +850,0 ºC
•Temperature range with J thermocouple
-99,9 ºC to +800,0 ºC
L
1
N
2
18
AKO-15400
AKO-15450
28
15
14
12
5
11
7
8
R2
13
4
+
6
SALIDA
SSR ENTRADA
DIGITAL
SSR
DIGITAL
OUTPUT INPUT
Reference
16
TOP
3
R1
17
9
10
Pt100
+
TC
4-20 mA
+
R=2.49 Ω
•Temperature range with K thermocouple
-99,9 ºC to +1370 ºC
•Temperature range with 4-20mA
-999 ºC to +2500 ºC
•Accuracy ±1 ºC
•Output control SSR 12 Vdc, max. 10 mA
•Front part dimensions 48 x 48 mm
•Depth 119 mm
•Relay R1 SPST 6 A, 250 V, cosj= 1
Description
–
Controller with power supply from 20 to 48 V~
Controller with power supply from 100 to 240 V~
Family
Pack
1535
1535
1 Units
1 Units
www.ako.com
AKOCONTROL
PID controller, 48 x 48 format Range from -99,9 ºC to +1370 ºC, 4-20 mA/0-10 V output
With 4-20mA/0-10V output.
Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple
J and K, 4-20 mA. With the 2 outputs, the controller can be used to work as
a stage plus alarm. With the 4-20 mA/0-10V output option, we have an analogue output to govern a valve or to resend the signal to a variator or PLC.
With the RS-485 communication option, the unit can be connected to a network
working with ModBus protocol.
4-20 mA
R<220 Ω
0-10 V
OUTPUT
MÓDULO
OPTION
SALIDA
4-20mA
mA/ /0-10
0-10VV
4-20
+ GND +
L
1
N
2
18
+
SSR
DIGITAL
SALIDA
ENTRADA
SSR
DIGITAL
OUTPUT
INPUT
16
15
14
TOP
3
R1
17
4
12
5
11
6
7
8
TC
4-20 mA
+
R=2.49
RS485
MÓDULO
COMMUNICATION
COMUNICACIÓN
OPTION
RS485
A
Reference
Pt100 +
10
9
B
GND
R2
13
-99,9 ºC to +850,0 ºC
-99,9 ºC to +800,0 ºC
• Temperature range with K thermocouple
-99,9 ºC to +1370 ºC
Ω
• Temperature range with 4-20 mA
-999 ºC to +2500 ºC
• Output control SSR 12 Vdc, maximum 10 mA
• Depth 119 mm
Descripction
_
20 to 48 V~, with 4-20 mA output
_
20 a 48 V~, with 4-20 mA output and communication
100 a 240 V~, with 4-20 mA output
100 a 240 V~, with 4-20 mA output and communication
AKO-15430
AKO-15437
AKO-15480
AKO-15487
Family
1535
1535
1535
1535
Pack
1 Unit*
1 Unit*
1 Unit
1 Unit
* Available on request
PID controller, 48 x 48 format Range from -99,9 ºC to +1370 ºC, 3 relays
With additional relay output.
Programmable for cold and heat. Controller PID or ON/OFF programme-selectable. Self-tuning function. Probe input configurable as Pt100, thermocouple J
and K, 4-20 mA. Digital input configurable for SetPoint change or start-stop of
the unit. With the 3 outputs, the controller can operate as a two stage, a neutral
zone, with alarm signalling. With the 4-20 mA/0-10V output option, we have an
analogue output to govern a valve or to resend the signal to a variator or PLC.
With the option of an input for current transformer (C.T.) the breakage of the
heating resistance can be detected.
4-20 mA
R<220 Ω
0-10 V
+ GND +
~
L
1
N
2
18
+
SSR ENTRADA
DIGITAL
SALIDA
SSR
DIGITAL
OUTPUT
INPUT
16
12
5
11
7
8
CURRENTCT
MÓDULO
TRANSFORMER
TRANSFORMADOR
C.T.
OPTION
DE CORRIENTE
-99,9 ºC to +850,0 ºC
-99,9 ºC to +800,0 ºC
-99,9 ºC to +1370 ºC
•Temperature range with 4-20 mA
-999 ºC to +2500 ºC
R2
13
4
6
15
14
TOP
3
R1
17
OUTPUT
MÓDULO
SALIDA
OPTION
4-20 mA
mA // 0-10
4-20
0-10 VV
9
10
Pt100 +
TC
REL R3
Reference
AKO-15410
AKO-15413
AKO-15415
AKO-15460
AKO-15463
AKO-15465
AKO-80033
4-20 mA
+
R=2.49 Ω
•Accuracy ±1 ºC
•Output control SSR 12 Vdc, maximum 10 mA
•Front part dimensions 48 x 48 mm
•Depth 119 mm
•Relay R1 SPST 6 A, 250V, cosj= 1
•Relay R2 SPDT 5 A, 250V, cosj= 1
•Relay R3 SPDT 5 A, 250V, cosj= 1
Description
_
20 to 48 V~, relay 3 SPDT 5 A
_
20 to 48 V~, relay 3 SPDT 5 A, with 4-20 mA output
_
20 to 48 V~, relay 3 SPDT 5 A, with input for C.T.
100 to 240 V~, relay 3 SPDT 5 A
100 to 240 V~, relay 3 SPDT 5 A, with 4-20 mA output
100 to 240 V~, relay 3 SPDT 5 A, with input for C.T.
Current transformer (CT) 25 A/0,05 A
Familly
Pack
1535
1535
1535
1535
1535
1535
1590
1 Unit*
1 Unit*
1 Unit*
1 Unit
1 Unit
1 Unit*
25 Units
29
AKOCONTROL
PID controller, 48 x 48 format with RS485 communication
Communication and input for current transformer
Programmable for cold and heat. Controller PID or ON/OFF programme-selectable.
Self-tuning function. Probe input configurable as Pt100, thermocouple J and K,
4-20 mA. With the 2 outputs, the controller can be used to work as a stage plus
alarm. With the option of an input for current transformer (C.T.) the breakage of
the heating resistance can be detected. With the RS-485 communication option,
the unit can be connected to a network working with ModBus protocol.
CURRENT
MÓDULO CT
TRANSFORMER
TRANSFORMADOR
C.T.
OPTION
DE CORRIENTE
~
L
1
N
2
18
+
SSR
DIGITAL
SALIDA
ENTRADA
SSR
DIGITAL
OUTPUT
INPUT
16
15
14
TOP
3
R1
17
4
12
5
11
6
7
8
9
GND
B
A
Reference
AKO-15401
AKO-15402
AKO-15403
AKO-15451
AKO-15452
AKO-15453
AKO-80033
R2
13
10
Pt100 +
TC
4-20 mA
+
R=2.49 Ω
RS485
MÓDULO
COMMUNICATION
COMUNICACIÓN
OPTION
RS485
-99,9 ºC to +850,0 ºC
-99,9 ºC to +800,0 ºC
• Temperature range with K thermocouple -99,9
ºC to +1370 ºC
• Temperature range with 4-20 mA
-999 ºC to +2500 ºC
• Resolution 0,1 ºC /Accuracy ±1 ºC
• Output control SSR 12 Vdc, maximum 10 mA
• Depth 119 mm
Description
_
20 to 48 V~, with input for C.T.
_
20 to 48 V~, with communication
_
20 to 48 V~, with input for C.T. and communication
100 to 240 V~, with input for C.T.
100 to 240 V~, with communication
100 to 240 V~, with input for C.T. and communication
Intensity transformer (C.T.) 25 A/0,05 A
Family
Pack
1535
1535
1535
1535
1535
1535
1590
1Unit*
1Unit*
1Unit*
1Unit*
1Unit
1Unit*
25Units
Input controllers 4/20 mA
Range from -999 to +999, 2 relays, panel mounting
2 control relays.
Programmable for direct and inverse operation. With 2 relay outputs, the controller can
be used to work as 2 independent stages, 2 related stages, neutral zone and 1 stage
plus alarm. It has 1 digital input for remote change of the SetPoint
Application: Fryers, electric panels, industrial installations, sewage treatment plants, etc.
• Measurement range -999 to +999
• 3-digit display
• Resolution 0,1
• Accuracy ±1 %
• Probe type 4-20 mA
• Panel cut-out dimensions 70,5 x 28,5 mm
• Depth 61 mm
• Control relays SPDT 8 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-14532
AKO-14534
AKO-80013
AKO-80040
230 V~, 2 relays SPDT 8 A
120 V~, 2 relays SPDT 8 A
Wall humidity probe, 10 to 95%, -5/50 ºC, output 4-20 mA
Tubular humidity probe, 5 to 95%, -10/70 ºC, output 4-20 mA
1510
1510
1590
1590
12 Units
12 Units
1 Unit
1 Unit
30
www.ako.com
AKOCONTROL
Temperature controllers Range from -99,9 ºC to +1000 ºC, 2 relays, panel mounting
Input for Pt100, NTC, PTC probes, J and K thermocouple.
With the 2 relay outputs, the controller can be used to work as 2 independent
stages, 2 related stages, neutral zone and one stage plus alarm.
Digital input for SetPoint change.
Application: Ovens, electric panels, industrial installations, incubators, etc.
-100 ºC to +440 ºC
•Temperature range with NTC probe
-50 ºC to +100 ºC
•Temperature range with PTC probe
-50 ºC to +150 ºC
Reference
AKO-14724
AKO-14725
AKO-14726
0 ºC to +600 ºC
0 ºC to +1000 ºC
•Resolution 0,1 ºC (1 ºC for J, K thermocouples)
•Accuracy ±1 ºC (±2 ºC for J, K thermocouples)
•Panel cut-out dimensions 70,5 x 33,8 mm
•Depth 61 mm
•Control relays 2 SPDT 8 A, 250 V, cosj=1
Description
_
12 V~, for panel cut-out 70,5 x 28,5 mm
Family
Pack
1530
1530
1530
12 Units
12 Units
12 Units
Temperature controllers Range from -50,0 ºC to +600 ºC, relays, panel mounting
Pt100 probe input.
stages or neutral zone
•Display 3 Digits
•Resolution 1 ºC
• Accuracy ±0,5 ºC
•Probe type Pt100
• Depth 61 mm
• Control relays 2 SPDT 8 A, 250 V, cosj= 1
_
Reference
AKO-14721
Description
_
12 V~, for Pt-100 probe no included
Family
Pack
1530
12 Units
31
AKOCONTROL
Range from -99,9 ºC to +1000 ºC, 2 relays, DIN rail mounting
Input for Pt100, NTC, PTC probes, J and K thermocouple.
stages, 2 related stages, neutral zone and one stage plus alarm.
Digital input for SetPoint change.
Application: Ovens, electric panels, industrial installations, incubators, etc.
-100 ºC to +440 ºC
• Temperature range with NTC probe
-50 ºC to +100 ºC
•Temperature range with PTC probe
-50 ºC to +100 ºC
Reference
AKO-15227
AKO-15225
AKO-15226
0 ºC to +600 ºC
0 ºC to +1000 ºC
•Resolution 0,1 ºC (1 ºC for J, K thermocouples)
•Accuracy ±1 ºC (±2 ºCfor J, K thermocouples)
(4 DIN modules)
•Control relays 2 SPDT 8 A, 250 V, cosj= 1
Description
_
24 V~, for DIN rail 4 modules, 70 x 58 x 90 mm
Familiy
Pack
1530
1530
1530
6 Units
6 Units
6 Units
Solar energy controllers Differential thermostat 2 relays, wall mounting
Pump controls, support resistance or air-thermal.
Input for 2 probes. Probe 1 configurable as NTC or PTC, probe 2 NTC. De-icing
function. Second relay programmable as air-thermal regulating function to limit
the temperature in the solar panel or thermostat function for the support resistance in the accumulator. Parameter protection by password. Test pushbuttons.
Low consumption. Fixing holes adapted to universal embedding box.
Application: Thermal solar energy installations
•With NTC probe, temperature range from -50.0 ºC to +99.9 ºC
•With NTC probe, temperature range from -50.0 ºC to +150 ºC
•Visualización 3 Dígitos (ºC/ºF)
•Accuracy ±1 ºC
•Pump relay SPST 16 A, 250 V, cosj= 1
•Power supply 230V~ ±10%,50/60 Hz
Reference
Description
Family
Pack
AKO-14801
Controller 230 V~, 2 relays, 1 NTC probe included
1530
10 Units
32
www.ako.com
AKOCONTROL
Solar energy controllers Panel differential thermostat
Panel format for integration in panel.
Input for 2 NTC probes. De-icing function. Pump stop for excessive temperature
in probe 2. Low consumption.
Application: Solar thermal energy installations
• Temperature range from -50.0 ºC to +99.9 ºC
• Depth 61 mm
• Pump relay SPST 16 A, 250 V, cosj= 1
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
Description
Family
Pack
AKO-14327
Controller 230V~, 1 relay, 1 NTC probe included
1530
12 Units
Solar energy controllers Differential thermostat, DIN rail mounting (4 modules)
DIN rail format for panel integration.
Input for 2 NTC probes. De-icing function. Pump stop for excessive temperature
in probe 2. Low consumption.
Application: Thermal solar energy installations
•NTC probe
(4 DIN modules)
•Pump relay SPST 16 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-15224
Controller 230V~, 1 relay, 1 NTC probe included
1530
6 Units
33
AKOCONTROL
Temperature controllers 2 relays, up to 2 probes, panel mounting
Multifunction.
The two probe inputs may be linked with the relay outputs for the functions
of thermometer and thermostat in cold and heat applications, as a differential
control of the two probes, double thermostat, two stages, neutral zone, etc.
The configuration of the menus means that certain parameters may or may not
be adjusted by the user, so that they might exclusively have the information and
adjustment that the use of the machine requires. It is possible to modify the
functions of the keys on the front and the temperature display. The configuration may be blocked by password.
Application: Solar energy, electric panels, industrial installations, etc
Reference
AKO-14722
AKO-14723
•Accuracy ±1 ºC
•Type of NTC probe (1 included)
•Depth 61 mm
•Control relay R1 1 SPST 16 A, 250 V, cosj= 1
•Control relay R2 1 SPDT 8 A, 250 V, cosj= 1
Description
_
Family
Pack
1530
1530
12 Units
12 Units
Temperature controllers 2 relays, up to 2 probes, DIN rail mounting
Multifunction
The two probe inputs may be linked with the relay outputs for the functions
of thermometer and thermostat in cold and heat applications, as a differential
control of the two probes, double thermostat, two stages, neutral zone, etc.
The configuration of the menus means that certain parameters may or may not
be adjusted by the user, so that they might exclusively have the information and
adjustment that the use of the machine requires. It is possible to modify the
functions of the keys on the front and the temperature display. The configuration may be blocked by password.
Application: Solar energy, electric panels, industrial installations, etc
• Type of NTC probe (1 included)
(4 DIN modules)
• Control relay R1 1 SPST 16 A, 250 V, cosj= 1
• Control relay R2 1 SPDT 8 A, 250 V, cosj= 1
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
Description
Family
Pack
AKO-15223
230 V~, for DIN rail
1530
6 Units
34
www.ako.com
AKOCONTROL
Modular controllers AKOTIM Range from -50 ºC to +99 ºC, 1 relay, panel mounting
Compressor control relay.
Used to regulate the temperature of cold generators and to display the information from the operation log on, the refrigeration time, the defrost time and
the complete cycle. They store information on the maximum and minimum
temperatures reached, in addition to other useful parameters to the HACCP.
Programme-selectable indication in ºC o ºF 2 inputs for control probe and independent temperature. Digital input for door contact. Defrost by compressor stop.
Application: Industrial and commercial cold, displays, electrical panels, etc.
•Temperature range (ºC/ºF)
Reference
AKOTIM-11TE
AKOTIM-11ATE
AKOTIM-11ARTE
AKOTIM-11ARTEB
•Accuracy ±1 ºC
•NTC probe
•Depth 61 mm
Alarm relay
Real time clock
Buzzer
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
12 Units
12 Units
12 Units
12 Units
Modular controllers AKOTIM Range from -50 ºC to +99 ºC, 2 relays, panel mounting
Used to regulate the temperature of cold generators and to display the information
from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures
reached, in addition to other parameters of use to the HACCP
3 inputs for regulating probe, evaporator and independent temperature.
Digital input for door contact. Defrost by electric heat or air. Programme-selectable
indication in ºC o ºF.
Reference
AKOTIM-12TE
AKOTIM-12ATE
AKOTIM-12ARTE
AKOTIM-12ARTEB
• NTC probe
• Depth 61 mm
• Power supply 230 V~ ±10%, 50/60 Hz
Alarm relay
Real time clock
Buzzer
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
12 Units
12 Units
12 Units
12 Units
35
AKOCONTROL
Modular controllers AKOTIM Range from -50 ºC to +99 ºC, 3 relays, panel mounting
Programme-selectable indication in ºC or ºF. 2 inputs for control probe and
independent temperature. Digital input for door contact.
Defrost by electric heat, air or hot gas bypass
Reference
AKOTIM-13TE
AKOTIM-13ATE
AKOTIM-13ARTE
AKOTIM-13ARTEB
•Accuracy ±1 ºC
•NTC probe
•Depth 61 mm
•Fan relays SPST 5 A, 250 V, cosj= 1
•Defrost relay SPDT 8 A, 250 V, cosj= 1
Alarm relay
Real time clock
Buzzer
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
12 Units
12 Units
12 Units
12 Units
Modular controllers AKOTIM Range from -50 ºC to +99 ºC, 1 relay, DIN rail mounting
Compressor control relay
Used to regulate the temperature of cold generators and to display the
information from the operation log on, the refrigeration time, the defrost
time and the complete cycle. They store information on the maximum and
minimum temperatures reached, in addition to other useful parameters to
the HACC. Programme-selectable indication in ºC o ºF. 2 inputs for control probe and independent temperature. Digital input for door contact.
Defrost by compressor stop.
Reference
AKOTIM-21TE
AKOTIM-21ATE
AKOTIM-21ARTE
AKOTIM-21ARTEB
36
• NTC probe
(4 DIN modules)
• Power supply 230 V~ ±10%, 50/60 Hz
Alarm relay
Real time clock
Buzzer
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
6 Units
6 Units
6 Units
6 Units
www.ako.com
AKOCONTROL
Modular controllers AKOTIM
Used to regulate the temperature of cold generators and to display the information
from the operation log on, the refrigeration time, the defrost time and the complete cycle. They store information on the maximum and minimum temperatures
reached, in addition to other useful parameters to the HACCP.
3 inputs for regulating probe, evaporator and independent temperature. Digital input
for door contact. Defrost by electric heat or air. Programme-selectable indication in
ºC o ºF.
Reference
AKOTIM-22TE
AKOTIM-22ATE
AKOTIM-22ARTE
AKOTIM-22ARTEB
• NTC probe
(4 DIN modules)
• Power supply 230 V~ ±10%, 50/60 Hz
Alarm relay
Real time clock
Buzze
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
6 Units
6 Units
6 Units
6 Units
Modular controllers AKOTIM
Programme-selectable indication in ºC or ºF. 2 inputs for control probe and
independent temperature. Digital input for door contact. Defrost by electric
heat, air or hot gas bypass.
Reference
AKOTIM-23TE
AKOTIM-23ATE
AKOTIM-23ARTE
AKOTIM-23ARTEB
• NTC probe
(4 DIN modules)
• Power supply 230 V~ ±10%, 50/60 Hz
Alarm relay
Real time clock
Buzzer
Family
Pack
-
Yes
Yes
Yes
-
-
Yes
Yes
-
-
-
Yes
1520
1520
1520
1520
6 Units
6 Units
6 Units
6 Units
37
AKOCONTROL
Compressors and condensers station up to 4 stages
Operating modes, proportional band and neutral zone.
4-stage controller for compressors or condensers. Compressor rotation by operating hours. Probe reading configurable by pressure or temperature probe. 5
relay outputs: 4 control outputs and 1 alarm output. Also with 6 digital inputs, 4
for the compressor protection thermal switches, 1 for high pressure switch and
1 for low pressure switch.
Application: Cold installations
_
•4 Control relays SPST 2 A, 250 V, cosj= 1
•1 Control relays SPDT 2 A, 250 V, cosj= 1
•Depth 61 mm
•3-digit display
•Accuracy ±1
•Resolution (4-20 mA) 0,01
•Resolution (NTC) 0,1 ºC
•Scale with input 4-20 mA -99.9 to +99.9
•Temperature range (NTC) -50 ºC to +99 ºC
•NTC or 4-20 mA probe
AKO-14540
Reference
Description
Family
Pack
AKO-14540
AKO-15590
Compresor and condensers station 4 stages, 12 V
Transformer 120-230 V/12 V 1560
1590
1 Unit
12 Units
Temperature controllers Wine thermostat
Control designed for wine cellars.
The two probe inputs may be linked with the two relay outputs for the thermometer, thermostats and timer applications in cold and heat installations. The
second timed relay may be used for the timing. 2 operating modes:
- Temperature control (cold or heat) and timing.
- Neutral zone control.
Timing frequency up to 24 hours. Connector for RS485 module to PC.
Second probe for display or alarm.
Application: Wine installations
•Accuracy ±1 ºC
•Type of NTC probe (1 included)
•Depth 61 mm
•Control relay R1 1 SPST 16 A, 250 V, cosj= 1
•Control relay R2 1 SPDT 8 A, 250 V, cosj= 1
Reference
Description
Family
Pack
AKO-14723/01
230V~, for panel cut-out 70,5 x 28,5 mm
1530
12 Units
38
www.ako.com
AKOCONTROL
Temperature controllers Range from -50 ºC to +350 ºC, 1 relay in IP65 box
Suitable for outdoors.
It is designed to regulate the temperature of pipes, tanks, valves, processing
equipment, etc. that require local control and are installed outdoors or in aggressive atmospheres, either due to dirt, humidity, corrosion, etc.
Application: Industrial installations, agricultural, etc.
•Accuracy ±0,5 ºC
•Probe type Pt100
•Working temperature -30 ºC to +60 ºC
•IP65 protection
•Control relay SPST 20 A, 250 V, cosj=1
Reference
Description
Family
AKO-1530
AKO-717425
AKO-15595
AKO-15596
Thermostat up to 350 ºC, relay 20 A SPST, without the probe
Thermostat to pipe fixing support
Pt-100 probe, from –50 to 200 ºC, 1,5 m of cable with braid
Pt-100 probe, from –200 to 600 ºC, in bracket 100 x 230 mm
1530
2190
1590
1590
Pack
5Units
1Unit
5Units
1Unit
Energy controller
Energy saving.
A controller designed to adjust the energy contribution from heating cables or
other heat sources, in applications in which it must vary in line with the ambient
temperature.
Its use is particularly suitable in system where, once designed and applied, the
only variable that influences in the system is the ambient temperature.
Application: Electric traces, avoid freezing on ramps, terraces, etc.
• Accuracy ±0,5 ºC
• Probe type Pt100
• IP65 protection
• Control relay SPST 10 A, 250 V, cosj=1
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
AKO-15301A
AKO-15599
Description
Family
Energy regulator ambient temperature function, 10 A relay
Pt-100 probe for ambient temperature
1530
1590
Pack
1 Unit
1 Unit
39
AKOCONTROL
Mechanic Thermostat EEx ed IIC T5
This thermostat is approved for use in Zone 1 and 2 classified area´s.
It is designed for use and ajustable control thermostats for freeze protection
and temperature maintenance applications requiring pipewall or tankwall sensing. Each thermostat is available in four temperature control and bulb exposure
temperatures ranges.
Aplicación: Electrical Tracing
•Temperature range from 0 ºC to +200 ºC
•Maximum pipe exposure temperature 230 ºC
•Operating ambient temp. -45 ºC a +55 ºC
•Differential 5 ºC approx.
•Switch rating 16 A
•Junction box with M25
•Enclosure rating IP66
•Bulb and capillary stainless steel
Reference
Description
Family
Pack
AKO-71658
AKO-71659
AKO-71660
AKO-71661
Electric heat tracing control EEx ed 0 to 200 ºC, pipe, for 7126x y 71219
Electric heat tracing control EEx ed 0 to 200 ºC, wall, for 7126x y 71219
Electric heat tracing control EEx ed 0 to 200 ºC, pipe, for 7121x, 7124x, 7125x
Electric heat tracing control EEx ed 0 to 200 ºC, wall, for 7121x, 7124x, 7125x
1530
1530
1530
1530
1 Unit
1 Unit
1 Unit
1 Unit
Temperature controllers Ice and snow centre
Guaranteeing energy savings of 80% with respect to control by means of
thermostats.
This ice control centre is used in automatic heating installations for open spaces.
With this system, the heating comes on only if there is a chance of freezing, for
example, snow, ice or sleet and automatically turns off after thawing.
Application: To avoid ice on ramps, terraces, roofs, guttering, etc.
• Measurement of temperature, humidity, ice and
snow
• Ground temperature range –40 ºC to +70 ºC
• Programme after heat from 10 min to 120 min
• Consumption meter in hours
Reference
AKO-80015
AKO-80016
AKO-80020
AKO-80030
AKO-80031
40
Description
Family
Pack
Ice and snow centre
Temp. and humidity probe for ramps, streets, pavements and terraces
Ice and snow probe for ramps, streets, pavements and terraces
Ice and snow ramp for roofs and guttering
Temperature probe for roofs and guttering 1590
1590
1590
1590
1590
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
www.ako.com
AKOCONTROL
Temperature controllers Thermostats for lifts
DIN rail mounting.
They are used to comply with the directive 95/16/EC in lift machinery rooms.
Minimum alarm level adjusted to +5 ºC and maximum alarm to +40 ºC. 3 indication leds: Maximum, minimum alarm and temperature OK. Includes an NTC
probe with 1,5 m of cable.
Application: Lifts
•Relay connected between 5 ºC and 40 ºC
•Accuracy ±5 ºC
•NTC probe
(1 DIN module)
•Depth 61 mm
•Relay SPDT 8 A, 24 V, cosj= 1
_
•Power supply voltage 24 V~ ± 20% 50/60 Hz
Reference
AKO-54301
Description
_
24V~, DIN rail mounting, temp. fixed min. 5 ºC max. 40 ºC
Probes and accessories Accessories
AKO-14910
Reference
AKO-14910
AKO-15586
AKO-155908
AKO-80004A
Family
Pack
1530
12 Units
AKO-155908
AKO-15586
AKO-80004A
Description
Family
Transparent lid for front protection
Metre of cable for extending probes, 3 x 0,5 mm2 shielded
Stainless steel sheath, 1/2" Gas thread
Converter from Pt-100 to 4-20 mA
1590
1590
1590
1590
Pack
120Units (B)
100m (A)
10Units
1Unit
(A) The metres of packaged material are the standard ones; however, we reserve the right to supply in different lengths those indicated.
41
AKOCONTROL
Probes and accessories Temperature probes
Reference
Description
Family
AKO-14901
AKO-14902
AKO-14903
AKO-14906
AKO-14915
AKO-15561
AKO-155801
AKO-155802
AKO-155803
AKO-155807
AKO-155815
AKO-155830
AKO-15582
AKO-15584
AKO-15585A
AKO-15595
AKO-15587
AKO-15596
AKO-15597
AKO-15599
AKO-80008
AKO-80019
AKO-15601
AKO-15602
AKO-15586
NTC probe, from –50 to100 ºC, 1,5 mde cable NTC probe, from –50 to 100 ºC, 2,0 mde cable
NTC probe, from –50 to100 ºC, 3,0 mde cable
NTC probe, from –50 to 100 ºC, 6,0 mde cable
NTC probe, from –50 to 100 ºC,stainless steel connector, 3,0 m of cable
NTC probe, from –50 to 100 ºC,IP68 protection, AISI 304. 1,5 m of cable
PTC probe, from –50 to 150 ºC, 1,5 m of cable
PTC probe, from –50 to 150 ºC,15,0 m of cable
PTC probe, from –50 to 150 ºC,30,0 m of cable
Pt-100 probe, from –50 to 180 ºC, 2,0 m of cable without braid
Pt-100 probe, from –50 to180 ºC, 10,0 mof cable without braid
Pt-100 probe, from –40 to180 ºC, 2,0 m of cable without braid
Pt-100 probe, from–50 to200 ºC, 1,5 m of cable with braid
Pt-100 probe, from –60 to350 ºC, 2,0 m of cable with braid
Pt-100 probe, from –200 to600 ºC,in bracket 100 x 230 mm
Pt-100 probe, from –70 to200 ºC,2,0 mof cable
Pt-100 probe to enviroment temperature
Pt-100 probe, EExd IIT6, IP65 box, to drums
Pt-100 probe, EExd IIT6, for Ex zone and pipes
J type probe, from 0 to 600 ºC, 3,0 mof cable
K type probe, from 0 to 1.000 ºC, 3,0 mof cable
Metre of cable for extending probes, 3 x 0,5 mm2 shielded
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
Pack
48Units
48Units
48Units
24Units
1Unit
10Units
10Units
10Units
10Units
10Units
5Units
1Unit
1Unit
1Unit
1Unti
5Units
1Unit
1Unit
1Unit
1Unit
1Unit
1Unit
1Unit
1Unit
100m (A)
(A) The metres of packaged material are the standard ones; however, we reserve the right to supply in different lengths those indicated.
Probes and accessories Humidity probes
AKO-80040
Reference
AKO-80013
AKO-80040
42
AKO-80013
Description
Family
Pack
Wall humidity probe, 10 to 95%, -5/50 ºC, output 4-20 mA
Tubular humidity probe, 5 to 95%, -10/70 ºC, output 4-20 mA
1590
1590
1 Unit
1 Unit
www.ako.com
AKOCONTROL
Probes and accessories Transformers and power supplies
AKO-15589
Reference
AKO-15589
AKO-15590
AKO-80014A
AKO-15590
Description
_
Power supply converter 14 to 30 V~/12 V=, 5 VA
Transformer 120-230/12 V~, 3 VA
Power source 115-230 V~/24 V, 1A (up to 50 probes, 4-20 mA type)
AKO-80014A
Family
1590
1590
1590
Pack
10Units
12Units
1Unit
Parameter servers
Tools for copying parameters
The programmers are particularly recommended for manufacturers
that must adjust the equipment with just one configuration.
The portable servers allow the installer to rapidly load a pre-programmed configuration into the equipment, without having to enter
the programming routine.
Reference
Description
Family
AKO-14918*
AKO-14916
AKO-14920
AKO-14921
AKO-14922
AKO-80018
AKO-D14918
Portable server for AKO-14xxx controllers
Programmer for AKO-14412, AKO-14423 and AKOTIM panels
Programmer for AKO-14012 to AKO-14123
Programmer for AKO-13012 to AKO-13123 Programmer for AKO-10123 to AKO-10323
Power supply 230/12 V for programmers
Portable server for Darwin controllers
1580
1580
1580
1580
1580
1580
1580
Pack
10 Units
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
10 Units
*Portable server incompatible with Darwin.
43
AKOCAM
The most complete solution
for cold room store
www.ako.com
AKOCAM
CAMCtrl 3 relay control, from -40 ºC to +150 ºC
Controller with built-in register for cold or heat.
Graphic screen with customisable information. Programming assistant and onscreen help. Input for NTC/PTC probe programme-configurable. Internal memory
up to one year for temperature register, with a battery for autonomy up to 24
hours. Designed under EN 12830 European standard. Wall and panel mounting.
integrated RS485 communication, ModBus protocol.
Application: Industrial and commercial cold, cold rooms and cabinets, industrial machinery, ovens, etc.
• With NTC probe, temperature range
from -40.0 ºC a +99.9 ºC
• With PTC probe, temperature range
from -50.0 ºC a +150 ºC
• Alarm Buzzer
• Clock in real time
• Box dimensions 230 x 230 mm
• Light relay SPST 16 A, 250 V, cosj= 1
• Alarm relay SPDT 8 A, 250 V, cosj= 1
• 2 configurable digital inputs
AKO-15613
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Di1 Di2
S1
TEM
Reference
AKO-15613
AKO-156131
RS-485
ALARM
41 42
45 46 47 48
LIGHT
COOL 230 V~
Description
Family
CAMCtrl-3, 230 V~
CAMCtrl-3 + printer, 100 to 240 V~
1510
1510
Pack
1 Unit
1 Unit
CAMCtrl 6 relay control, from -40 ºC to +100 ºC
Controller with built-in register.
Graphic screen with customisable information. Programming assistant and onscreen help. Auxiliary relay configurable for 2nd evaporator defrost or stop for
pump down. Input for independent temperature probe or defrost control in
2nd evaporator. Internal memory up to one year for temperature register, with
a battery for autonomy up to 24 hours. Designed under EN 12830 European
standard. Wall and panel mounting. Integrated RS485 communication. ModBus
protocol.
Application: Industrial and commercial cold, cold rooms and cabinets, etc.
• IP65 protection
• Alarm Buzzer
• Sonda NTC / Resolution 0,1 ºC
AKO-15633
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
S3
REG
S2
DEF
S1
TEM
Di1 Di2 RS-485 ALARM
DEFROST FAN LIGHT AUX COOL 230 V~
Reference
Description
Family
Pack
AKO-15633
AKO-156331
CAMCtrl-6, 230 V~
CAMCtrl-6 + printer, 100 a 240 V~
1510
1510
1 Unit
1 Unit
45
AKOCAM
CAMCtrl Control board with built-in register
Display and distributed control.
Display of information on graphic screen. Programming assistant and on-screen help.
Autonomous control board, with internal memory up to one year for registering
temperatures, with battery for autonomy up to 24 hours. Designed under EN 12830
European standard. Auxiliary relay configurable for 2nd evaporator defrost or pump
down. Input for independent temperature probe or defrost control in 2nd evaporator. Wall and panel mounting. Integrated RS485 communication. ModBus protocol.
Application: Industrial and commercial cold, cold rooms and cabinets, etc.
• Temperature range -40,0 ºC to +99,9 ºC
• Resolution 0,1 ºC / Accuracy ±1 ºC
• NTC probe
• Clock in real time
• Display size 230 x 230 x 90 mm
AKO-15663
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
S1
TEM
Reference
AKO-15663
AKO-156631
AKO-15673
S2
DEF
S3
AMB
Di1 Di2 RS-485 ALARM
DEFROST FAN LIGHT AUX COOL 230 V~
• RS485 communication between units
• IP65 protection
• Alarm Buzzer
Description
Family
CAMCtrl-6S, 230 V~
CAMCtrl-6S + printer, 100 a 240 V~
CAMCtrl-6S Split Board, 230 V
1510
1510
1510
Pack
1 Unit
1 Unit
1 Unit
PROPlus 6-relay control, from -50 ºC to +100 ºC
Controller with breaker switch for operating manowuvres.
Electrical evaporator control and manoeuvring panels for refrigeration services with
condenser units that already have a built-in electrical panel for power and manoeuvring the compressor and condenser.
For controlling refrigeration services with the following elements: liquid selenoid,
Single-phase evaporator fans, air/time or electrical defrosting.
With 2nd optional probe allows defrosting by temperature.
Built-in temperature register (1 chanel). Cold room light switch. Signalling of alarms
by buzzer and relay. Graphic display
Aplicación: Cold installations.
•Temperature range -50 ºC a +99 ºC
•Viewing on graphic screen
•Type of NTC sensor (1 included)
•Accuracy ±1 ºC
•Clock in real time
•Internal buzzer
U Cond.Vent.Evap.
Reference
Description 230 V/l 230 V/l Electric Defrost
Res. (Induc.)Res. (Induc.) 230 V/l
400 V/III
AKO-15640
AKO-15643
46
PROPlus - 1F
PROPlus - 3F
•IP65 protection
•SPST 16 A, 250 V solenoid relay, cosj= 1
•Light relay SPST 16 A, 250 V, cosj= 1
•Alarm relay SPDT 8 A, 250 V, cosj= 1
•2 configurable digital inputs
Power Supply
Family
Pack
20 A (11,5 A) 8 A (2,2 A) 2.500 W
230 V/l (50/60 Hz)
16 A (4 A)
8 A (2 A) 6.500 W 400 V/lll (50/60 Hz)
1510
1510
1 Unit
1 Unit
www.ako.com
AKOCAM
CAMAlarm Trapped person alarm for cold room stores
Optical and acoustic alarm.
This family of alarms is designed for cold room stores working at negative temperatures or with a controlled atmosphere, optically and acoustically signalling if
there is someone trapped. All units have a relay output for connection to GSM
alarm system. This model is designed under EN 378-1 European standard and is
provided with RS485 communication for connection to a monitoring system.
Aplicación: Cold room stores.
• Optical and acoustic alarm. Acoustic power
upper 90 dB to 1 m
• Interior light up to -50 ºC
• 2 m. special cable included for low temperature
• Detection of broken pushbutton cable
• 1 output relay for remote alarm indication
(GSM module)
• Battery charge indication
• Autonomy over 10 hours
• Wall and panel mounting
• IP65 protection
• Alarm dimensions 230 x 230 mm
• Light dimensions 94 x 171 x 55 mm
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
Description
Family
AKO-52063
AKO-520631
AKO-52062
Alarm, with output for 1 light (1 included)
Spare power supply for AKO-52063
Light and pushbutton for spare alarm with 2 m cable
4200
4200
4200
Pack
5Units
1Unit
1Unit
CAMAlarm Trapped person alarm for cold room stores, up to 4 lights, EN378-1 European Standard
Up to 4 lights to indicate up to 4 doors and pushbuttons.
This family of alarms is designed for cold room stores working at negative temperatures or with a controlled atmosphere, optically and acoustically signalling if there is
someone trapped. All units have a relay output for connection to GSM alarm system.
This model is designed under EN 378-1 European standard and is provided with
RS485 communication for connection to a monitoring system.
Aplicación: Cold room stores.
• Optical and acoustic alarm. Acoustic power upper 90 dB to 1 m
• 2 m. special cable included for low temperature
• Detection of broken pushbutton cable
• 1 output relay for remote alarm indication (GSM module)
• Battery charge indication
• Autonomy over 10 hours
• Wall and panel mounting
• IP65 protection
• Alarm dimensions 230 x 230 mm
• Light dimensions 94 x 171 x 55 mm
• Power supply 230 V~ ±10%, 50/60 Hz
Reference
AKO-52064
AKO-520641
AKO-52062
Description
Family
Alarm, with output for 4 lights push button (1 included)
Spare power supply for AKO-52064
4200
4200
4200
Pack
5Units
1Unit
1Unit
47
AKOCAM
CAMRegis.H Temperature data loggers, approved to ITC/3701/2006, market pioneers
Supplied with declaration of conformity with Order ITC 3701/2006 and
standard UNE EN 12830 and certificate of probe calibration.
Royal Decrees 168/1985 and 1109/1991 require the use of data loggers in cold rooms
storing refrigerated, frozen, deep-frozen and heat-labile products (medicines).
According to LAW ITC/3701/2006 temperature data loggers used to control
the temperature in cold rooms must be subject to metrological control.
Setup wizard and textual menus, with on-screen help.
Display and printout in graphs or tables of values.
Quick print button, to print data from the previous week.
Internal memory up to three years, with a recording frequency of 15 minutes.
Integrated RS485 communications.
ModBus protocol
Application: Industrial and commercial refrigeration, health care, etc.
• Temperature range depending on probe
model, from -50.0 °C to +100 °C
• Display and recording 0.1 °C. Accuracy ±1 °C
• Supplied with 3- and 6-metre probes already
connected
Reference
AKO-15767
AKO-15762
AKO-15703
AKO-80039
AKO-5008H
• Housing dimensions 230 x 230 x 90 mm
• Alarm relays 2 SPDT 8 A, 250 V, cosj= 1
• Power supply 100 a 240 V~
• IP65 Protection
Description
Family
CAMRegis.H VP2, 2-input temperature logger CAMRegis.H VP2i, 2-input temperature logger with printer
Spare roll of thermal paper
USB/RS485 converter with 2 m cable to PC SOFTRegis.H software for managing and monitoring CAMRegis data loggers
1570
1570
1590
1580
1580
Pack
1
1
10
1
1
Unit
Unit
Units (B)
Unit
Unit
(B) minimum and indivisible packaging units.
CAMRegis Temperature and humidity loggers
Inputs for NTC, Pt1000 and 4-20 mA probes.
Large, high luminosity graphic display.
Setup wizard and text menus in multiple languages, with on-screen help.
Quick print button, to print out the last calendar week of all entries logged.
Internal memory up to three years, with a recording frequency of 15 minutes.
Designed in compliance with European standard EN 12830.
Integrated RS485 communications.
ModBus protocol.
Possibility of connecting Pt100 probes to 5-input units.
Application: Industrial and commercial refrigeration, processing industry, etc.
• Temperature range depending on probe
model -150 ºC to +590 ºC
• Range 4-20 mA -999 to +999
• Display and recording 0.1 °C. Accuracy ±1 °C
• Input accuracy 4-20 mA ± 1% (mA)
• Housing dimensions 230 x 230 x 90 mm
• Alarm relays 2 SPDT 8A, 250 V, cosj= 1
• Power supply 100-240 V~
• IP65 Protection
Reference
Description
Family
AKO-15750
AKO-15752
AKO-15740
AKO-15742
AKO-15703
AKO-14901
AKO-80013
AKO-80040
AKO-80039
AKO-5008H
CAMRegis-5, 5-input temperature and humidity logger
CAMRegis-5i, 5-input temperature and humidity logger with printer CAMRegis-10, 10-input temperature and humidity logger
CAMRegis-10i, 10-input temperature and humidity logger with printer
Spare roll of thermal paper
NTC probe, -50 to +100 °C, 1.5 m cable Wall humidity probe, 10%-95%, -5/50 °C, 4-20 mA output Tubular humidity probe, 5%-95%, -10/70 °C, 4-20 mA output
USB/RS485 converter with 2 m cable to PC SOFTRegis.H software for managing and monitoring CAMRegis loggers
1570
1570
1570
1570
1590
1590
1590
1590
1580
1580
(B) minimum and indivisible packaging units.
48
Pack
1 Unit
1 Unit
1 Unit
1 Unit
10 Units (B)
48 Units
1 Unit
1 Unit
1 Unit
1 Unit
www.ako.com
AKOCAM
CAMCombi 6-relay control, from -50 ºC to +100 ºC, with alarm for cold room store
Controller with built-in alarm and register.
This family of controllers with registers and alarm appears from the CAMCtrl,
CAMRegis and CAMAlarm series. Display of information on graphic screen.
Person locked in alarm in room with output for 4 lights and autonomy of 10
hours. Identification of the alarm signal to know which pushbutton has triggered the alarm. Wall and panel mounting. Interior space for up to 2 contactors.
Integrated RS485 communication. ModBus protocol.
Application: Cold room stores
•Temperature range -40,0 ºC to +99,9 ºC
•Accuracy ±1 ºC
•NTC probe
•Real time clock
AKO-156332
1
2
3
4
5
ALARM
6
7
8
PUSH
BUTTON1
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
PUSH
BUTTON2
PUSH
BUTTON3
PUSH
BUTTON4
RS-485
Di1 Di2
S3
REG
S2
DEF
RS-485
ALARM
DEFROST
FAN
LIGHT
AUX
COOL
230 V~
S1
TEM
•Defrost relay SPDT 16 A, 250 V, cosj= 1
•Auxiliary relay SPST 16 A, 250 V, cosj= 1
•Light relay SPST 16 A, 250 V, cosj= 1
•Alarm relay SPDT 8 A, 250 V, cosj= 1
•1 output relay for remote alarm signalling
(GSM module)
• IP65 protection
Reference
Description
Family
AKO-156332
AKO-52062
CAMCtrl-6 + alarm, 230V~ (1 light included)
1510
4200
Pack
1 Unit
1 Unit
CAMCombi 6-relay Split control, from -50 ºC to +100 ºC, with alarm for cold room store
Display with alarm and control board with built-in register.
This family of controllers with registers and alarm appears from the CAMCtrl,
CAMRegis and CAMAlarm series. Display of information on graphic screen.
Autonomous control board, with internal memory up to one year for registering the
temperature. Person locked in alarm in room with output for 4 lights and autonomy of
10 hours. Identification of the alarm signal to know which pushbutton has triggered
the alarm. Wall and panel mounting. Interior space for up to 2 contactors. Integrated
RS485 communication. ModBus protocol.
Application: Cold room stores
• Temperature range -40,0 ºC to +99,9 ºC
• Resolution 0,1 ºC / Accuracy ±1 ºC
• NTC probe
• Real time clock
AKO-156632
1
2
3
4
ALARM
5
6
7
8
PUSH
BUTTON1
Reference
AKO-156632
AKO-15673
AKO-52062
• 1 output relay for remote alarm signalling
(GSM module)
• IP65 protection
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
PUSH
BUTTON2
PUSH
BUTTON3
PUSH
BUTTON4
RS-485
Di1 Di2
S1
TEM
S2
DEF
RS-485
ALARM
DEFROST
FAN
LIGHT
AUX
COOL
230V~
S3
AMB
Description
Family
CAMCtrl-6S + alarm, 230 V~ (1 light included)
CAMCtrl-6S Split Plate, 230 V~
1510
1510
4200
Pack
1 Unit
1 Unit
1 Unit
49
AKOCABLE
Heating Cable Solutions
® Electrical Tracing
www.ako.com
AKOCABLE
HEATING CABLE TECHNOLOGIES
Mineral insulation
Used for high temperature
maintenance and/or exposure
Series type heating cable
Fluoropolymer cover
Used in long tracing systems
Constant wattage
Parallel type heating cable
The heating cable may be cut to
size on site without changing its
linear power.
Self-regulating
Used in the majority of
temperature maintenance applications
Constant wattage heating cable PVC insulation
Exposure temperature up to 70 ºC with PVC high temperature insulation.
PVC insulation. Copper conductors 2 x 1,5 mm2. Nominal outer
dimensions 7 x 9,5 mm. Suitable for low temperature applications.
Application: Construction and refrigeration
•Minimum bend radius at 20 mm to –15 ºC
•Heating conductor element: Nickel - Chromium
•Distance between contacts: 1000 mm
•Maximum insulation temperature: 70 ºC
AKO-12193
Splice kit to
box + aend
AKO-12193
Kit para extremos
deM25
conexión
caja + final
AKO-12192
Splice
+ end + final
AKO-12192 Kit
dekit
empalme
Up
to70
Máx.
70 ºC
ºC
M25
AKO-5238
kit
AKO-5238 Termination
Kit de terminación
Up to70
70 ºC
ºC
Máx.
Up to70
70 ºC
ºC
Máx.
Reference
Description
AKO-5231
AKO-1212
AKO-12192
AKO-12193
AKO-5238
Heating cable 10 W/m to 230 V, PVC insulation
Heating cable 20 W/m to 230 V, PVC insulation
Splice kit + end
Splice kit to M25 box + end
Termination kit Family
2110
2110
2190
2190
2190
Pack
100m. (A)
100m. (A)
1Unit
1Unit
25Units
51
AKOCABLE
Constant wattage heating cable Silicone insulation
Exposure temperature up to 180 ºC with silicone insulation.
Suitable for avoiding ice in pipes and metal surfaces or for
heating not exceeding 55 ºC on them. It can be cut to size.
They are commonly used in industrial or commercial refrigeration installations to avoid ice in the drain pipes, condensation on the surface, and in applications on metal surfaces not
exceeding 55 ºC.
Application: Refrigeration
AKO-52383Kit
Termination
kit
AKO-52383
de terminación
connection
ExtremoCold
frío de
conexiónend
Reference
AKO-5234
AKO-52342
AKO-52344
AKO-52346
AKO-52383
Up
to70
70ºCºC
Máx.
Heating
Tramo length
calefactor
Termination
end
Extremo
final
• Minimum bend radius at 10 mm to –4 ºC
• Heating conductor element: Nickel - Chromium
• Distance between contacts: 595 mm
• Maximum exposure temp. (disconnected): 180 ºC
• Outer dimensions: 8 x 5 mm
Description
Family
Heating cable 30 W/m at 230 V, silicone insulation
Kit for sealing connection termination + end
2110
2110
2110
2110
2190
Pack
150 m. (A)
150 m. (A)
150 m. (A)
75 m. (A)
25 Units
Constant wattage heating cable Silicone insulation
Exposure temperature up to 180 ºC with silicone insulation.
PVC insulation. Copper conductors 2 x 1,5 mm2. Nominal outer
dimensions 7 x 9,5 mm. Suitable for low temperature applications.
Application: Construction and refrigeration
•Minimum bend radius at 20 mm a –40 ºC
•Maximum circuit length 68 m
•Maximum exposure temperature (disconnected): 180 ºC
•Distance between contacts: 500 mm
AKO-12193 Kit
Splice
kit extremos
to M25 box
end
AKO-12193
para
de+conexión
a caja + final
Up
to
70
Máx. 70 ºC
ºC
M25
AKO-12192
Splice
+ end + final
AKO-12192 Kit
dekit
empalme
AKO-5238 Termination
kit
AKO-5238
Kit de terminación
Up
to70
70 ºC
ºC
Máx.
Up
to 70
70 ºC
ºC
Máx.
Reference
Description
Family
AKO-712545
AKO-12192
AKO-12193
AKO-5238
Heating cable 50 W/m to 230 V, silicone insulation
Splice kit + end
Splice kit to M25 box + end
Termination kit 2110
2190
2190
2190
Pack
100m. (A)
1Unit
1Unit
25Units
52
www.ako.com
AKOCABLE
Constant wattage heating cable Silicone insulation + metal braid
Exposure temperature up to 180 ºC with metal protection braid.
A range with braid, giving mechanical and electrical protection by using it as an earth conductor. It can be cut to size.
They are commonly used in industrial or commercial refrigeration installations to avoid ice in the drain pipes, condensation
on the surface, and in applications on metal surfaces not
exceeding 55 ºC.
Application: Refrigeration
• Minimum bend radius at 10 mm to –40 ºC
• Outer dimensions: 9 x 6 mm
• Maximum circuit length: 63 m
• Maximum operating temperature (connected): 85 ºC
• Maximum exposure temperature (disconnected): 180 ºC
end
ExtremoCold
fríoconnection
de conexión
Reference
AKO-52341
AKO-52383
AKO-52383
kit
AKO-52383Termination
Kit de terminación
Up
to 70
Máx.
70 ºC
ºC
Heating
length
Tramo
calefactor
Termination
end
Extremo final
Description
Family
Heating cable 30 W/m to 230 V, insulation + metal braid
Kit for sealing connection termination + end
2110
2190
Pack
150 m. (A)
25 Units
Exposure temperature up to 180 ºC with metal protection braid.
A range with braid, giving mechanical and electrical protection
by using it as an earth conductor. It can be cut to size. They
are usually used in heating to maintain the temperature of
pipes, tanks, etc. in protection against freezing, maintaining
process temperatures of up to 165 ºC and especially in areas
that are not corrosive or atmospheres classified as potentially
explosive.
Application: Industry and construction
M25
Up
to 180
ºCºC
Hasta
180
AKO-71092
Kit Kit
for connection
ends to M25
box + end asealing
AKO-71092
para extremos
de conexión
caja + final
•Minimum bend radius at 20 mm a –40 ºC
•Outer dimensions:9,4 x 6,9 mm
•Maximum operating temp. (connected): up to 165 ºC
•Maximum exposure temp. (disconnected): 180 ºC
Reference
Description
Family
Pack
AKO-71010
AKO-71015
AKO-71025
AKO-71035
AKO-71050
AKO-71092
Heating cable 10 W/m a 230 V, up to 165 ºC
Kit for connection ends to M25 box + end sealing
2110
2110
2110
2110
2110
2190
100m.
100m.
100m.
100m.
100m.
1Unit
(A)
(A)
(A)
(A)
(A)
53
AKOCABLE
24/48V with metal protection braid.
A range with braid, giving mechanical and electrical protection by using it as an earth conductor. It can be cut to size.
They are usually used in heating to maintain the temperature
of pipes, tanks, etc. in protection against freezing, maintaining process temperatures of up to 165 ºC and especially
in areas that are not corrosive or atmospheres classified as
potentially explosive.
Application: Industry and construction.
• Minimum bend radius at 20 mm a –25 ºC
• Outer dimensions: 9.4 x 6.4 mm
Up
to 180
Hasta
180ºCºC
M25
AKO-71092
for para
connection
ends tode
M25
box + enda sealing
AKO-71092 KitKit
extremos
conexión
caja + final
Reference
AKO-5237*
AKO-71092
Description
Family
Pack
Heating cable 40 W/m to 48 V, (10 W/m to 24 V)
2110
2190
100 m. (A)
1 Unit
*Available on request
Constant wattage heating cable Fluoropolymer covering
Exposure temperature up to 180 ºC with fluoropolymer covering.
Follow the AKO usage instructions. It can be cut to size.
These are used to maintain the temperature and protection against ice in pipes, on roofs, terraces, ramps, stairs,
drains, etc.
Application: Construction
•Minimum bend radius at 20 mm to –40 ºC
•Heating conductor element Nickel - Chromium
•Outer dimensions 9 x 6,5 mm
•Maximum operating temperature (connected) up to 155 ºC
•Maximum exposure temperature (disconnected) 180 ºC
AKO-70194
connection
ends
M20 boxa+caja
end+ final AKO-70192
AKO-70194 Kit
Kitforpara
extremos
deto
conexión
AKO-70192 Splice
Kit dekitempalme
+ final
+ end
M25
Up
to 180
Hasta
180ºC
ºC
Up Máx.
to 180
70ºC
ºC
Reference
Description
Family
AKO-70115
AKO-70130
AKO-70140
AKO-70192
AKO-70194
Splice kit + end, for cables embedded in concrete
2110
2110
2110
2190
2190
Pack
100m. (A)
100m. (A)
50m. (A)
10Units(B)
5Units
54
www.ako.com
AKOCABLE
Constant wattage heating cable Fluoropolymer covering
Exposure temperature up to 200 ºC with fluoropolymer
cover.
Suitable for corrosive atmospheres and with risk of explosion,
when following the AKO usage instructions. It can be cut to size.
They are usually used in heating to maintain the temperature
of pipes, tanks, etc. in protection against freezing, maintaining
process temperatures up to 190 ºC and especially in installations
with highly corrosive atmospheres, in plastic pipes and tanks, and
in areas classified as potentially explosive atmospheres.
Application: Industry
• Minimum bend radius at –40 ºC: 20 mm
Up
to 200
Hasta
200ºC
ºC • Heating conductor element Nickel - Chromium
M25
• Outer dimensions 10,3 x 7,4 mm
• Maximum operating temperature (connected): up to 190 ºC
AKO-71092
Kit for
connection
ends
M25 boxa+caja
end +
sealing
AKO-71092 Kit
para
extremos
de to
conexión
final
Reference
AKO-71110
AKO-71120
AKO-71130
AKO-71135
AKO-71150
AKO-71092
Description
Family
Pack
2110
2110
2110
2110
2110
2190
100m.
100m.
100m.
100m.
100m.
1Unit
(A)
(A)
(A)
(A)
(A)
Self-regulating heating cable Polyolefin insulation
Exposure temperature up to 85 ºC with braid for
ground connection.
Suitable for dry or damp atmospheres, but not corrosive.
Area classification: ordinary. Maximum temperature for continuous exposure: 65 ºC.
Application: Industry and refrigeration
•Minimum bend radius at –20 ºC: 30 mm
•Outer dimensions: 12 x 5 mm
•Maximum operating temperature (connected): 65 ºC
AKO-12292
Kitpara
for connection
to M25
box ++final
end sealing
AKO-12292 Kit
extremos deends
conexión
a caja
AKO-122906
de empalme
AKO-122906KitSplice
kit
M25
AKO-5239
Termination
kit
AKO-5239 Kit
de terminación
Reference
Description
Family
Pack
AKO-1221
AKO-12292
AKO-122906
AKO-5239
Heating cable 25 W/m to 10 ºC, 230 V (11 W/m, 40 ºC)
Kit for connection ends to M25 box + end sealing Splice kit
Termination kit
2120
2190
2190
2190
100m. (A)
1Unit
1Unit
25Units
55
AKOCABLE
Self-regulating heating cable Fluoropolymer covering
Exposure temperature up to 85 ºC suitable for Ex zone.
Adjust power output in line with the temperature in the pipe. It can be cut to
size. Maximum temperature for continuous exposure: 65 ºC. For electric heating
of pipes and tanks, in maintaining temperatures when steam cleaning is NOT
performed.
M20
M25
Reference
AKO-71212
AKO-71214
AKO-71216
AKO-71218
AKO-71219
AKO-71281
AKO-71282
AKO-71285
AKO-71287
AKO-71285
AKO-71282
Hasta 200 ºC
• Temperatura mínima de instalación –40 ºC
• Minimum bend radius: 32 mm
Description
Family
Pack
Termination kit for AKO-71219 heating cables
Termination kit for heating cables
Glands for connecting heating cables
Glands for connecting AKO-71219 heating cables
2120
2120
2120
2120
2120
2190
2190
2190
2190
–
–
–
–
–
1 Unit
1 Unit
1 Unit
1 Unit
Self-regulating heating cable Fluoropolymer insulation and covering
Adjust power output in line with the temperature in the pipe. It can be
cut to size. Maximum temperature for continuous exposure: 121 ºC.
For electric heating of pipes and tanks, in maintaining temperatures when
steam cleaning is performed.
•Minimum installation temperature –40 ºC
•Minimum bend radius: 32 mm
M20
M25
AKO-71286
AKO-71282
Hasta 200 ºC
Reference
Description
Family
AKO-71241
AKO-71243
AKO-71245
AKO-71248
AKO-71282
AKO-71286
Glands for connecting heating cables M25
2120
2120
2120
2120
2190
2190
56
Pack
–
–
–
–
1 Unit
1 Unit
www.ako.com
AKOCABLE
Adjust power output in line with the temperature in the pipe. It can be
cut to size. Maximum temperature for continuous exposure: 121 ºC.
For electric heating of pipes and tanks, in maintaining temperatures when
steam cleaning is performed.
Application: Industry.
•Minimum installation temperature: –60 ºC
•Maximum exposure temperature (intermitent): 250 ºC
M20
M25
AKO-71286
AKO-71282
Up to200
200ºCºC
Hasta
Reference
Description
Family
AKO-71250
AKO-71251
AKO-71252
AKO-71253
AKO-71255
AKO-71258
AKO-71282
AKO-71286
2120
2120
2120
2120
2120
2120
2190
2190
Pack
–
–
–
–
–
–
1 Unit
1 Unit
Up to 250 ºC, suitable for Ex zone.
Adjust power output in line with the temperature in the pipe. It can be cut to size.
Maximum temperature for continuous exposure: 150 ºC. For electric heating of
pipes and tanks, in maintaining temperatures when steam cleaning is performed.
Application: Industry.
• Minimum installation temperature: –60 ºC
• Minimum bend radius: 32 mm
• Maximum exposure temperature (intermitent): 250 ºC
M20
M25
Reference
AKO-71261
AKO-71263
AKO-71265
AKO-71267
AKO-71281
AKO-71287
AKO-71287
AKO-71281
Up to200
200ºCºC
Hasta
Description
Family
Pack
Glands for connecting heating cables
2120
2120
2120
2120
2190
2190
–
–
–
–
1 Unit
1 Unit
57
AKOCABLE
Exposure temperature up to 260 ºC in glass fiber and fluoropolymer
covering.
Adjust power output in line with the temperature in the pipe. It can be cut to size.
Maximum temperature for continuous exposure: 150 ºC. For electric heating of
pipes and tanks, in maintaining temperatures when steam cleaning is performed.
M20
M25
•Minimum installation temperature: –60 ºC
AKO-71283
AKO-71286
Up to200
200
Hasta
ºCºC
Reference
Description
Family
AKO-71270
AKO-71271
AKO-71275
AKO-71279
AKO-71283
AKO-71286
Heating cable 14 W/m to 10 ºC, 230 V (10 W/m, 120 ºC) Heating cable 28 W/m to 10 ºC, 230 V (18 W/m, 120 ºC)
Termination kit for heating cables. Exp. up to 200 ºC
2120
2120
2120
2120
2190
2190
Pack
–
–
–
–
1 Unit
1 Unit
Series cable Mineral insulation
Exposure temperature up to 600º C with mineral insulation.
Magnesium oxide insulation. Stainless steel exterior covers. Sufficient flexibility to
adapt it to surfaces. These kinds of cables are used to heat pipes, tanks, hoppers
and other processing equipment up to 500 ºC and in cases where cables must
withstand up to 600 ºC with the cables disconnected. .
•Minimum bend radius at –20 ºC: 32 mm
•Stainless steel exterior cove
•Cold terminations of 1,5 m
•Heating elements of 12 and 20 m
•Temperatura máx. exposición (desconectado) 600 ºC
1500 mm
1500 mm
150 mm
150 mm
M20
Cold connection
end
Extremo
frío para conexión
M20
Heating
Longitud
zona length
calefactora
Cold connection
end
Extremo
Reference
Description
Family
AKO-71301A
AKO-71302A
Heating cable 12 m long, 440 W, 230 V, hasta 514 ºC
Heating cable 20 m long, 1537 W, 230 V, hasta 420 ºC
2130
2130
58
Pack
1 Unit
1 Unit
www.ako.com
AKOCABLE
Series cable Quartz fibber insulation
Exposure temperature up to 900 ºC with quartz fibber insulation.
Quartz fiber insulation. Very flexible to adapt it to very small pipes. Installation in
dry places with no risk of humidity. These kinds of heating cables are suitable for
heating pipes and surfaces up to a maximum temperature of 800 ºC.
• Minimum bend radius at –20 ºC: 10 mm
• Cold ends of 1,5 m
Cold connection
end
Extremo
1,5 m
Reference
AKO-71321
AKO-71323
AKO-71325
Cold frío
connection
end
Extremo
para conexión
Heating
Longitud
zona length
calefactora
1,5 m
Description
Family
Pack
Heating cable 1 m long, 170 W, 230 V, up to 800 ºC
2130
2130
2130
1 Unit
1 Unit
1 Unit
Heaters Heating panels
Exposure temperature up to 185 ºC, flexible for heating
tanks and surfaces.
Power outputs of 375 W and 875 W. Installed on galvanized
metal fabric. They are used to maintain the temperature in
horizontal tanks.
Aplicaction: Industry
•Nominal dimensions 800 x 1620 mm
•Maximum exposure temperature
(connected) up to 185 ºC
•Maximum exposure temperature
(disconnected) up to 200 ºC
•Heating cable AKO-71115 and AKO-71135
Reference
Description
Family
AKO-71515
AKO-71535
Panel 0,8 x 1,62 m, 375 W, 230 V, up to 185 ºC
Panel 0,8 x 1,62 m, 875 W, 230 V, up to 132 ºC
2150
2150
Pack
1 Unit
1 Unit
59
AKOCABLE
Heaters Heating bands
Flexible pipes for heating metal drums.
For standard metal drums from 25 to 200L. Powers from 300W to 1000W. Easy
to fix the drum. They are usually used to melt solids, liquate viscous materials and
maintain the temperature of contained products.
• Power supply cable 2 m
• Heating uniformly spread
• Silicone insulation with glass fiber
Reference
AKO-80034T
AKO-80035T
AKO-80036T
AKO-80037T
Description
Family
Pack
Band 1000 W, 230 V, for 200 l drums (180 x 1665 mm)
2150
2150
2150
2150
2 Units
1 Unit
1 Unit
1 Unit
Heaters Heater Jacket
Container heaters to 1000 L square tanks
This heater jacket has quick release adjustable buckles for ease of installation and
removal and is designed.
with upper and lower heat zones, each with separate thermostatic control. This
allows for the upper heating zone to be switched off once the content level has
fallen below half way.
•Power supply cable 2 x 2,5 m
•Two circuits each 1000 W to 230 V
•Temp. Control from de 0 to 90 ºC
•Top cap included
Reference
AKO-80041
60
Description
Family
Pack
Container heater to 1000 l square tanks, 2 x 1000 W, 230 V
2150
1 Unit
www.ako.com
AKOCABLE
Heaters Drum heaters
For products highly sensitive to temperature in a safe area.
Carbon steel diffuser, thermal insulation of 40 mm of glass fiber. They have guides
that allow them to be stacked to achieve the required height. Gentle product heating.
They are used to melt solids and liquate viscous materials or materials that are problematic due to their sensitivity to heat, such as greases, glucose, honey, tar, paints,
varnishes, phenols, waxes, etc.
•Power cable: 3 m de 3 x 2,5 mm2
•Power up to 3.120 W per drum
•Outer diameter: 750 mm
•Inner diameter: 620 mm
•Height: 440 mm
AKO-718520
AKO-718510
Reference
Description
Family
AKO-718510
AKO-718520
Base heater 720 W, 230 V
Ring heater 1.200 W, 230 V
2150
2150
Pack
1 Unit
1 Unit
Heaters Drum heaters
For products highly sensitive to temperature in the Ex area.
Carbon steel diffuser, thermal insulation of 40 mm of glass fiber. They have guides that allow them to be stacked to achieve the required height. Gentle product
heating. They are used to melt solids and liquate viscous materials or materials
that are problematic due to their sensitivity to heat, such as greases, glucose,
honey, tar, paints, varnishes, phenols, waxes, etc.
• Power cable: 3 m de 3 x 2,5 mm2
• Power up to 2.200 W per drum
• Outer diameter: 750 mm
• Inner diameter: 620 mm
• Height: 440 mm
Reference
AKO-718720
Description
Family
Pack
Ring heater 1100 W, to 10 ºC with self-regul. cable 2150
1 Unit
61
AKOCABLE
Accessories Junction boxes and supports
Junction boxes, fixing supports and protectors for crossing lagging.
Plastic boxes very resistant to corrosion and suitable for outdoor installation. Stainless steel support for fixing to boxes.
Kits for crossing lagging, used to prevent the heating cables
from being damaged.
Application: Industry, construction and refrigeration
Reference
Description
Family
AKO-71612
AKO-71611
AKO-71617
AKO-71620
AKO-71625
AKO-71628
AKO-71629
AKO-717425
AKO-1901
AKO-1903
Junction box with 1 M20 input and 2 M12, for probes
Junction box with 4 M25 inputs, ordinary area
Junction box with 4 M25 inputs, Ex area
Cable protector in pipe lagging
Support for fixing boxes to the AKO-71620 protector
Protector for heating cables in sharp edges
Cable protector in tank lagging
Support for fixing boxes and controllers
Set screw + accom. for clamps
Stainless steel tape to truss clamp
2190
2190
2190
2190
2190
2190
2190
2190
4900
4900
Pack
1Unit
1Unit
1Unit
5Units
5Units
20Units (B)
1Unit
1Unit
50Units (B)
30m (B)
Accessories
Thermostats and accessories for installing heating cables.
A range of accessories for sealing, fixing,
signalling and identifying heating cables
makes their installation easy on pipes,
tanks and surfaces in general.
Application: Industry and construction
Reference
AKO-712699
AKO-71630
AKO-71635
AKO-71666
AKO-717440
AKO-717441
AKO-717445
AKO-71751
Description
Family
Tube of high temperature sealing silicone 75 ml
Support for heating cable in vertical tanks
Installation support for heating cables on roofs and gutters
Self-vulcanising sealing tape 9,15 x 19 mm
50 m roll of aluminium adhesive tape
33 m roll of glass fiber adhesive tape
Set of 5 AKO-TRACE signalling labels
Set of 5 heating section identification labels
2190
2190
2190
2190
2190
2190
2190
2190
62
Pack
5Units
1Unit
10Units (B)
10Units
1Unit
5Units
1Unit
1Unit
www.ako.com
AKOCABLE
Accessories Heat shrinkable sleeves
With hot-weld glue for humidity-proof seals
They are used to seal and protect cable splices from humidity.
•Retracts up to 33% of its original size
•Contraction temperaturen >125 ºC
•Operating temperature from –30 ºC a +80 ºC
•Flexible modified polyolefin material
black with interior hot-weld glue
Reference
Description
Family
AKO-52401
AKO-52402
AKO-52403
AKO-52404
Heat shrinkable sleeve diameter 12/4 mm, length 1.2 m
Heat shrinkable sleeve diameter 12/4 mm, length 50 mm
Heat shrinkable sleeve diameter 6/2 mm, length 1.2 m
Heat shrinkable sleeve diameter 6/2 mm, length 75 mm
2190
2190
2190
2190
Pack
1 Unit
100 /25 Units (B)
1 Unit
100 /25 Units (B)
63
AKOKIT
A complete heating cable solution
for the Industrial, Safety and Home
Automation markets
www.ako.com
AKOKIT
Pipes and emergency systems
Kit to prevent freezing and maintain the temperature in
pipes and emergency systems.
Electric heating of thermally insulated piping by constant
power parallel heating cable.
•Maximum exposure temperature 70 °C (due to the use of heat shrink
tubing on the end).
•Minimum ambient temperature -10 °C for external piping.
•Minimum ambient temperature 5 °C for indoor piping.
•Minimum temperature stabilization of water 15 °C for installation in
showers and 10 °C in water supply pipes for hose reel and hydrant
systems.
•Kit for use in ordinary areas.
Reference
Description
Family
AKO-EH-10
AKO-EH-20
AKO-EH-40
AKO-EH-80
AKO-ACS-10
AKO-ACS-20
AKO-ACS-40
AKO-ACS-80
AKO-TI10-METAL
AKO-TI20-METAL
AKO-TI40-METAL
AKO-TI80-METAL
AKO-TI10-PLAST
AKO-TI20-PLAST
AKO-TI40-PLAST
AKO-TI80-PLAST
AKO-SAFE-5M
Tracing heating kit to prevent freezing in pipes up to 5" and 10 m
Tracing heating kit for ACS pipes up to 2" and 10 m
Tracing heating kit for metal pipes up to 3”, 60 °C and 10 m
Tracing heating kit for plastic pipes up to 3 ", 30 °C and 10 m
Kit to avoid freezing in emergency systems (Showers, hose-reels, etc)
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
Pack
1 Unit
1 Unit
1 Unit 1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
65
AKOKIT
Tanks and hoppers
Kit to maintain the temperature in
tanks and hopper walls to prevent
condensation.
Electric heating of thermally insulated
vertical and horizontal tanks and hoppers
by constant power parallel heating cable.
•Maximum exposure temperature 70 °C
(due to the use of heat shrink tubing on the
end).
•Maximum exposure temperature of 200 °C on
unconnected panels.
•Minimum external ambient temperature -10 °C
Reference
Description
Family
AKO-DV-1M3-METAL
AKO-DV-2M3-METAL
AKO-DV-5M3-METAL
AKO-DV-10M3-METAL
AKO-DV-1M3-PLAST
AKO-DV-2M3-PLAST
AKO-DV-5M3-PLAST
AKO-DV-10M3-PLAST
AKO-DH-3M3-METAL
AKO-DH-5M3-METAL
AKO-DH-10M3-METAL
AKO-DH-2M3-PLAST
AKO-DH-5M3-PLAST
AKO-DH-10M3-PLAST
AKO-TOLVA-5M2
AKO-TOLVA-12M2
AKO-TOLVA-20M2
AKO-TOLVA-30M2
Heat tracing kit for maintaining up to 60 °C on steel vertical tanks < 1 m3
Heat tracing kit for maintaining up to 60 °C on steel vertical tanks <– 2 m3
Heat tracing kit for maintaining up to 60 °C on vertical steel tanks < 5 m3
Heat tracing kit for maintaining up to 60 °C on vertical steel tanks <– 10 m3
Heat tracing kit for maintaining up to 30 °C on vertical steel tanks <– 2 m3
Heat tracing kit for maintaining up to 30 °C on vertical steel tanks <–10 m3
Heat tracing kit for maintaining up to 60 °C on horizontal steel tanks < 3 m3
Heat tracing kit for maintaining up to 30 °C on horizontal steel tanks < 53
Heat tracing kit for maintaining up to 70 ºC on hopper walls up to < 5 m2
Heat tracing kit for maintenance up to 70 °C on hopper walls S <12 m2
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
Pack
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
Underfloor heating
Kit for underfloor heating.
Electric heating with constant power cable of underfloors and
exterior surfaces (e.g. streets, ramps, terraces, roads).
Application: Construction.
•Minimum ambient temperature -5 °C for radiant floor.
•Minimum ambient temperature -20 °C for heating of exterior surfaces.
Reference
Description
AKO-SR-5M2
AKO-SR-10M2
AKO-SR-20MS
AKO-SE-10M2
AKO-SE-20M2
AKO-SE-40MS
AKO-SE-60MS
Kit for underfloor heating up to 5 m2
Kit for heating exterior surfaces up to 10 m2
66
Family
2200
2200
2200
2200
2200
2200
2200
Pack
1 Unit 1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
www.ako.com
AKOKIT
Roofs and Gutters
Kit for preventing ice and snow buildup
on roofs and in drainage channels.
Constant power parallel heating cable on
roofs and gutters.
Application: Construction.
•Minimum ambient external temperature -20 °C
•Kit for use in ordinary area
Reference
Description
Family
Pack
AKO-TEJADO-15M
AKO-TEJADO-30M
AKO-TEJADO-45M
AKO-TEJADO-60M
AKO-CANAL-50M
AKO-CANAL-100M
AKO-CANAL-150M
AKO-CANAL-200M
Kit for heating up to 15 m long roof overhang.
Kit for heating up to 50 m length of guttering.
2200
2200
2200
2200
2200
2200
2200
2200
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
Solutions for Refrigeration
Solution for industrial and commercial refrigeration.
Electric heating with constant power cable to prevent formation of condensation on display windows and the protection
of cold room entrances, doors and floors.
Application: Construction and refrigeration.
•Minimum temperature of -25 °C in display case.
•Minimum temperature of -30 °C in cold rooms.
Reference
Description
Family
AKO-SC-20M2
AKO-SC-40M2
AKO-SC-60M2
AKO-SC-80M2
AKO-SC-100M2
AKO-EC-100
AKO-EC-150
AKO-EC-200
AKO-EC-250
AKO-EC-300
AKO-MPC-4M
AKO-MPC-8M
AKO-MPC-12M
Kit for heating cold room underfloors up to 20 m2
Kit for heating cold room entrances up to 1 m wide
Kit for heating cold room entrances up to 1.5 m wide
Kit for heating cold room entrances up to 2.5 m wide
Kit for heating cold room door and window frames up to 4 m
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
Pack
1
1
1
1
1
1
1
1
1
1
1
1
1
Unit Unit
Unit
Unit
Unit
Unit Unit
Unit Unit
Unit
Unit Unit
Unit
67
AKOPRO
of control panels
www.ako.com
AKOPRO
PROPLAS Plastic Line Electrical Panels
Electrical Panel packing in PVC.
With controllers with AKOTIM function (HACCP).
Imagen A
Image B
•Packing in IP54 protection with transparent lid.
•Temperature display in ºC or ºF and 3 digits with optional decimal point per programme.
•Allows two kinds of connection:
- Compressor and solenoid valve in parallel.
- Stop for pump down.
•Second probe allowing end of defrost and fan temperature control.
•Funcionamiento programable de los ventiladores del evaporador.
•Programmable operation of the evaporator fans.
•Relay output for alarm 5 A, 250 V, cosj= 1, SPST.
•Connector for RS485 module for communication to PC.
POSITIVE temperatures, defrost by air
Reference
AKO-17204
AKO-17206
AKO-17210
AKO-17212
AKO-17214
AKO-17216
AKO-17218
AKO-17222
AKO-17225
AKO-17229
Compressor intensity
230 V
400 V
single-ph. three-ph.
–
–
–
–
–
–
–
–
–
–
2,5-4 A
4-6,3 A
6,3-10 A
6,3-10 A
10-16 A
10-16 A
16-20 A
16-20 A
20-25 A
20-25 A
Defrost Resistances 230 V
400 V
–
–
–
–
–
–
–
–
–
–
Evaporator Fans
230 V
400 V
–
–
–
–
–
–
–
–
–
–
4,8 A
–
4,8 A
–
4,8 A
–
– 1,6-2,5 A
4,8 A
–
– 1,6-2,5 A
4,8 A
–
–
2,5-4 A
4,8 A
–
–
2,5-4 A
Img.
D
D
D
C
D
C
D
C
D
C
Family
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
Pack
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
Image C
NEGATIVE temperatures, defrost by electric heat
Reference
Image D
AKO-17304
AKO-17306
AKO-17310
AKO-17311
AKO-17314
AKO-17315
AKO-17316
AKO-17318
AKO-17322
AKO-17329
Compressor intensity
230 V
400 V
–
–
–
–
–
–
–
–
–
–
Defrost Resistances 230 V
400 V
2,5-4 A
4100 W
4-6,3 A
4100 W
6,3-10 A
4100 W
6,3-10 A
–
10-16 A
4100 W
10-16 A
–
10-16 A
–
16-20 A
16-20 A
–
20-25 A
–
–
–
–
5500 W
–
5500 W
5500 W
12500 W
12500 W
15500 W
Evaporator Fans
230 V
400 V
4,8 A
–
4,8 A
–
4,8 A
–
4,8 A
–
4,8 A
–
4,8 A
–
– 1,6-2,5 A
4,8 A
–
–
2,5-4 A
–
2,5-4 A
Img.
D
D
D
B
D
B
A
B
A
A
Family
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
Pack
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
69
AKOPRO
PROMETAL Metal Line Electrical Panels
Electrical Panels for installations with condenser units and single phase evaporators
Design features
•Metal enclosure with dimensions as shown, with RAL-7032-5 grey metallic textured powder coating with.
•Main switch, double pole, live switching, front control.
•Three-way selector switch, 22 mm diameter, for controlling condenser unit (0-Off, 1-Collect gas, 2-Automatic)
•Two-way selector switch, 22 mm diameter, for controlling ventilators. (1-Automatic, 2-Manual). Only panels
with programmer
•Indicator lamps for condenser unit status and faults, and other microprocessor indications
•Indicator lamps for Defrost, Solenoid, Ambient Thermostat and Resistance Thermostat in panels with programmer
•Vinyl mimic panel with refrigeration circuit
•Direct starter with no thermal cutout for condenser unit
•Contactor for defrosting resistance circuit. 20 A in AC-1
•General magneto-thermal cutout for power circuits
•Single-pole magneto-thermal cutout for control circuits, single-pole + neutral
•Installation control depending on panel selected, AKO or defrost programmer
•Numbering of power and control components
•Electrical diagrams and documentations
•Moeller brand switchgear
Microprocessor control of one or two relays as shown (with thermostat)
Evaporator
Model
Condenser Fans Resistors
unit
230 V/II230 V/II1-ph
AKO-17506
AKO-17507
AKO-17508
AKO-17510
AKO-17511
AKO-17512
70
12 A
16 A
20 A
12 A
16 A
20 A
Si
Si
Si
Si
Si
Si
No
No
No
Si
Si
Si
Control
AKO-14223
AKO-14223
AKO-14223
AKO-14323
AKO-14323
AKO-14323
Dimensions
Family
Pack
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
1550
1550
1550
1550
1550
1550
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
www.ako.com
AKOPRO
PROMETAL Metal Line Electrical Panels
Electrical Panels with 3-phase condenser units and evaporators with singe-phase
fans and 3-phase resistors
Design features
•Metal enclosure with dimensions as shown, with RAL-7032-5 grey metallic textured powder coating with.
•Main switch, double pole, live switching, front control.
•Three-way selector swi tch, 22 mm diameter, for controlling condenser unit (0-Off, 1-Collect gas, 2-Automatic)
•Two-way selector switch, 22 mm diameter, for controlling ventilators. (1-Automatic, 2-Manual). Only panels
with programmer
•Indicator lamps for condenser unit status and faults, and other microprocessor indications
•Indicator lamps for Defrost, Solenoid, Ambient Thermostat and Resistance Thermostat in panels with programmer
•Vinyl mimic panel with refrigeration circuit
•Direct starter with no thermal cutout for condenser unit
•Contactor for defrosting resistance circuit. 20 A in AC-1
•General magneto-thermal cutout for power circuits
•Single-pole magneto-thermal cutout for control circuits, single-pole + neutral
•Installation control depending on panel selected, AKO or defrost programmer
•Numbering of power and control components
•Electrical diagrams and documentations
•Moeller brand switchgear
Microprocessor control of one or two relays as shown (with thermostat)
Evaporator
Modele
Condenser Fans Resistors
unit
230V/I400V/III1-ph
AKO-17609
AKO-17610
AKO-17611
AKO-17612
AKO-17613
AKO-17614
AKO-17615
AKO-17616
AKO-17617
AKO-17618
AKO-17619
AKO-17620
AKO-17621
AKO-17622
AKO-17623
AKO-17624
1
1,6
2,5
4
6,3
10
16
20
1
1,6
2,5
4
6,3
10
16
20
-1,6 A
-2,5 A
- 4 A
-6,3 A
- 10 A
- 16 A
- 20 A
- 25 A
-1,6 A
-2,5 A
- 4 A
-6,3 A
- 10 A
- 16 A
- 20 A
- 25 A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Control
AKO-14223
AKO-14223
AKO-14223
AKO-14223
AKO-14223
AKO-14223
AKO-14223
AKO-14223
AKO-14323
AKO-14323
AKO-14323
AKO-14323
AKO-14323
AKO-14323
AKO-14323
AKO-14323
Dimensions
Family
Pack
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
300 x 300 x 140
400 x 300 x 140
400 x 300 x 140
400 x 300 x 140
400 x 300 x 140
400 x 300 x 140
400 x 300 x 140
400 x 300 x 140
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1550
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
1 Unit
71
AKOPRO
PROPlus Electronic panels for cold rooms
PROPlus. Electronic control panels.
Cold rooms above and below freezing. Defrost by air/time or resistors.
ProPlus is the comprehensive, single-device electronic solution for managing cold
rooms, both above and below freezing, in conjunction with:
* Standard condensing units.
* Fully enclosed condensation.
* As a service panel in decentralised systems.
Application: Refrigeration systems.
•Input: 3 NTC probes (one included)
•Temperature range:-50.0 °C to +99.9 °C
•Outputs: 6 relays (COMP, DEFROST, FAN,
LIGHT, ALARM and AUX)
•Display: Multi-language graphic LCD screen
•Communication: Integrated RS485
•RTC: Real-time clock with ± 1 °C accuracy
• 2 digital inputs: configurable
• Alarm signalling: buzzer (audible internal
alarm) and relay
•IP65 Protection
•Dimensions: 203 x 230 x 90 mm
Advantages:
• User-friendly menus and help texts to facilitate programming on LCD screen.
• Easy access to thermo-magnetic circuit breaker, thanks to its frontal arrangement.
• High degree of IP65 protection for installation in wet environments.
• Comprehensive functionality for managing cold rooms with fully enclosed condensing units.
PROPlus AKO-15640 for single-phase condensing and evaporator units
Electronic panels with overall 16 A thermo-magnetic protection, for controlling cold
rooms, with up to 2 HP compressors, with the following components:
* Compressor/Liquid solenoid.
* Single-phase evaporator fans.
* Defrost by air/time or electrical (up to 2,500 W 230 V/l)
Application: Refrigeration systems.
Ventajas:
Easy to wire, thanks to the new terminal block.
Wiring diagrams:
Various types of wiring are possible with AKO-15640, depending on the condensing unit available.
Diagram Type 1:Condensing units (compressor,
liquid solenoid, PA/PB)
72
www.ako.com
AKOPRO
Diagram Type 2: Capillary condensation
units (without liquid solenoid)
Diagram Type 3: Fully enclosed condensations.
PROPlus AKO-15643 for single-phase condensing unit and evaporator with three-phase resistors
Electronic panel with thermo-magnetic circuit breaker for control circuits and resistors for controlling cold rooms, with the following components:
* Compressor/liquid solenoid.
* Single-phase evaporator fans.
* Defrost by air/time or electrical (up to 6.500 W 400 V/lII)
U. Cond. Evap. Fan
Reference
Description 230 V/l 230 V/lElectrical Defrost
Res. (Induc.)Res. (Induc.) 230V/l
400 V/III
AKO-15640
AKO-15643
PROPlus - 1F
PROPlus - 3F
20A (11,5 A)
16A (4 A)
Power supply
8A (2,2 A) 2.500 W
230 V/l (50/60 Hz)
8A (2 A) 6.500 W 400 V/lll (50/60 Hz)
Family
Pack
15101
15101
Unit
Unit
73
AKOELEC
The most reliable solution
for level control
74
www.ako.com
AKOELEC
Alarm for gas leak detection on permanent connection
Optical and acoustic alarm.
• Acoustic alarm stop button.
• Sensitivity variator button for on site unit adjustment by the installer.
• Auxiliary relay allowing alarms to be remotely activated from the AKO-5605A centralizer
• Not suitable for areas classified as potentially explosive atmospheres.
Reference
Description
Family
Pack
AKO-52092
Gas detector alarm, permanent connection
4200
4 Unit
Centralisation alarm for 5 input circuits
Autonomy over one hour with automatic Ni-Cd battery recharging.
•When one of the circuits is closed, the acoustic alarm is activated and also one of the 5
optical indications to show which circuit is sending the signal. The acoustic may be stopped, but not the optical, which remains active and in the memory until the signal circuit
is opened.
•The units may be installed adjacently to form centres of up to 5, 10, 15, etc. signals.
•Power supply 230 V ±10%, 50/60 Hz.
AKO-5406
AKO-5605A
1 2
3 4 5 6 7 8 9 10 11 12 13 14
15 16
230 V~
Reference
Description
Family
Pack
AKO-5605A
Centralizer for 5 input circuits
4200
1 Unit
75
AKOELEC
Alarms with emergency lighting for lifts, AKO-5404 series
These units comply with EN 81-1.
• Own autonomy of over one hour with automatic Ni-Cd battery recharging.
• Output for rescue lighting 6 V, 500 mA.
• Output for permanent supply 6 V, 40 mA.
• Noise level over 90 decibels at 1 m.
• Dimensions 212 x 139 x 52 mm.
• The units with auxiliary relay allow alarms to be activated remotely
in the AKO-5605A centralizer.
AKO-54041A 230V or AKO-54043 120V
AKO-5404C
Installed in cabin
Installed in cabin
230V~
6V
max. 500 mA
6V max. 40 mA
Cabin pushbutton
Power supply
6V
max. 500 mA
Reference
Description
AKO-5404C
AKO-54041A
AKO-54043
Power supply unit 230 V without relay output Power supply unit 230 V with relay output Power supply unit 120 V with relay output
Family
4400
4400
4400
6V max. 40 mA
Cabin pushbutton
Pack
12 Units
12 Units
12 Units
Alarms with emergency lighting for lifts, loudspeaker or siren type
•Own autonomy of over one hour with automatic battery recharging.
• Output for rescue lighting 6 V, 500 mA.
• Noise level over 90 decibels at 1 m.
• Dimensions 268 x 160 x 116 mm.
• With an auxiliary relay allowing alarms to be activated remotely
in the AKO-5605A centralizer
AKO-5405A
Reference
AKO-5405A
AKO-5409A
AKO-5409A
76
Description
Family
Unit 230V, output 6V, alarm with loudspeaker
Unit 230V, output 12V, alarm with siren
4400 12 Units
4400 8 Units
Pack
www.ako.com
AKOELEC
Panels for rescue lighting in cabin, external power supply
These lights panels supplied by alarms come on automatically in the
event of loss of electricity, carrying out the function of rescue lighting.
•Material in self-extinguishing polycarbonate V 0 making them very secure
against vandalism.
•Dimensions: 111 x 77 x 26 mm.
Reference
Description
Family
AKO-5406
AKO-54061
AKO-549505
Surface panel with 2 6 V lamps
Surface panel with 2 12 V lamps
Lamp 6V, 0,20 A, spare
4400
4400
4400 Pack
24Units
12Units
25Units (B)
Alarm with emergency lighting for lifts, for fluorescent lamps from 18 to 30 W
• Own autonomy of over one hour with automatic Ni-Cd battery recharging.
• Rescue lighting output for system with fluorescent tube.
• With an auxiliary relay allowing alarms to be activated remotely
in the AKO-5605A centralizer.
Reference
Description
Family
AKO-5413
Power supply unit for fluorescent lamps from 18 to 30 W
4400
Pack
6 Units
77
AKOELEC
Phase detector relays Fault or imbalance
•UA single relay may be used at two power supply voltages.
•They detect a percentage voltage drop of the three phases.
•They detect a percentage voltage drop of one of the phases.
•They detect phase inversion.
•Contact triggering delay between 1 and 2 sec.
•Maximum contact intensity 8 A, 250 V~, cosj=1.
•DIN 42880 box dimensions 90 x 71 x 58 mm.
•Combustibility degree V 0 according to UL94.
Reference
Description
Family
Pack
AKO-5442B
AKO-54426
Detector relay for 400 V, 50 Hz and 230 V, 50 Hz
Detector relay for 380 V, 60 Hz and 208 V, 60 Hz
4240
4240
12 Units
6 Units
Timer relays for compressor response delay
A2
230 V~
A1
A2
A1
4
3
AKO-5256A
4
3
230 V~
A2
A2
4
4
A1
A1
3
3
AKO-5255A
Reference
Description
AKO-5255A
AKO-5256A
Delay since last disconnection adj. de 50” to 300”
Response delay, adjustable
de 30” to 300”
78
Family
4240
4240
Pack
10 Units
10 Units
www.ako.com
AKOELEC
Transparent protectors for fluorescent lamps
Protection of food from contamination.
Reference
Description
Family
AKO-TUBO 08T
AKO-TUBO 13T
AKO-TUBO 14T
AKO-TUBO 15T
AKO-TUBO 18T
AKO-TUBO 20T
AKO-TUBO 21T
AKO-TUBO 28T
AKO-TUBO 35T
AKO-TUBO 36T
AKO-TUBO 40T
AKO-TUBO 58T
AKO-TUBO 65T
AKO-617089
AKO-617097
AKO-61904
AKO-619901
AKO-619902
AKO-619907
For fluorescent lamp 8 W, Ø 16 mm, 288 mm length
For fluorescent lamp28 W, Ø 16 mm, 1149 mm length
White stopper for AKO-TUBOS diam. 26 mm
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
Pack
125 Units (B)
125 Units (B)
125 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
125 Units (B)
125 Units (B)
125 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
25 Units (B)
50 Units (B)
50 Units (B)
50 Units (B)
Colour protectors for fluorescent lamps
They allow fluorescent lamps to be transformed into colour tubes.
Reference
Description
Family
AKO-TUBO 18B
AKO-TUBO 18G
AKO-TUBO 18R
AKO-TUBO 18V
AKO-TUBO 36B
AKO-TUBO 36G
AKO-TUBO 36R
AKO-TUBO 36V
AKO-TUBO 58B
AKO-TUBO 58G
AKO-TUBO 58R
AKO-TUBO 58V
Blue For fluorescent lamp 18 W, Ø 26 mm, 590 mm length
Amber For fluorescent lamp 18 W, Ø 26 mm, 590 mm length
Red
Green For fluorescent lamp 18 W, Ø 26 mm, 590 mm length
Red For fluorescent lamp 36 W, Ø 26 mm, 1200 mm length
Red For fluorescent lamp 58 W, Ø 26 mm, 1500 mm length
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
4100
Pack
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
25 Units
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
79
AKONIVEL
Technology developed for the
protection and safety of people
www.ako.com
AKONIVEL
Level control electronic relays for conducting liquids, DIN rail box
Storm interference protection by varistors on the input of the power
supply and probes.
•Maximum length 200 metres.
•For DIN rail and plug-in terminals.
•Sensitivity control.
•Stainless steel electrode probe with protector.
Filling
Draining
Tank
Well
Reference
Description
Family
AKO-53171
AKO-53172
AKO-53173
Relay 230/400 V for well or tank
Relay 230/400 V for well + tank
Stainless steel electrode probe with protector
3310
3310
3310
Pack
6 Units
6 Units
18 Units
Level control electronic relays for conducting liquids, undecal box
Storm interference protection by varistors on the input of the power
supply and probes.
• Maximum length 200 metres.
• For installation on undecal socket.
• Sensitivity control.
• Interior bridge for changing the order of the probes.
• Stainless steel electrode probe with protector.
Reference
AKO-53181
AKO-53182
AKO-53183
AKO-53184
AKO-53185
AKO-53186
AKO-53187
AKO-53188
AKO-53180
AKO-53173
Filling
Draining
Description
Family
Relay 230/400V~ for well or tank
Relay 230/400V~ or well + tank
Relay 48/120V~ for well or tank
Relay 48/120V~ for well + tank
Relay
24V~ for well or tank
Relay
24V~ for well + tank
Relay
24V~ for well or tank + alarm relay
Relay
230V~ for well or tank + alarm relay
Socket for undecal boxes
Stainless steel electrode probe with protector
3310
3310
3310
3310
3310
3310
3310
3310
3310
3310
Pack
12 Units
12 Units
12 Units
12 Units
12 Units
12 Units
12 Units
12 Units
10 Units(B)
18 Units
81
AKONIVEL
Level control level switches without mercury or lead for liquids
High reliability to control the level of liquids in clean waters, sewage,
waste waters, septic tanks, etc.
• Usable at densities between 0,95 and 1,10 Kg/dm3.
• Working temperature between 0 ºC and 60 ºC.
• Maximum working pressure 4 bar to +20 ºC.
• Inverter micro switch 10A, 250 V~, (1/2 CV).
• Polypropylene lid.
• PVC cable
Draining
Filling
Reference
AKO-53120
AKO-53124
AKO-53125
AKO-53126
AKO-53127
Description
Family
Pack
Level switch with 6 m of cable
3315
3315
3315
3315
3315
12 Units
1 Unit
1 Unit
1 Unit
1 Unit
Level control level switches for liquids, clean waters and general applications
High reliability to control the level of liquids in clean, drinking waters
and general applications.
•Operating temperature between 0 ºC and 60 ºC.
•Inverter micro switch of 10(4 )A, 250~.
•Nominal dimensions 81 x 131 x 41,5 mm.
•Polypropylene lid.
•By regulating the distance of the counter-weight, the maximum and minimum levels are regulated.
Filling
Black
Blue
Draining
Brown
Black
Reference
Description
Family
Pack
AKO-53112
AKO-53114
Level switch with 2 m of cable and counter-weight
Level switch with 10 m of cable and counter-weight
3315
3315
25 Units
12 Units
82
www.ako.com
AKONIVEL
Level control level switches for corrosive liquids and temperatures up to 125 ºC
In AISI 316 stainless steel, highly corrosion-resistant.
• Operating temperature between –20 ºC and +125 ºC.
• Include 1 m of silicon cable of 3 x 0,5 mm2.
AKO-53161
AKO-53165
Reference
AKO-53161
AKO-53165
Description
Family
Horizontal Surface 60VA. 250~, 40 bar, Ø 52 mm
Horizontal Surface 40VA. 250~, 15 bar, Ø 30 mm
3315
3315
Pack
1 Unit
1 Unit
Level control level switches for corrosive liquids and temperatures up to 125 ºC
In AISI 316 stainless steel, highly corrosion-resistant.
• Operating temperature between –20 ºC and +125 ºC.
• Include 1 m of silicon cable of 3 x 0,5 mm2.
AKO-53162
AKO-53166
Reference
AKO-53162
AKO-53166
Description
Family
Pack
Vertical Surface
Vertical Surface
3315
3315
1 Unit
1 Unit
60 VA, 250~, 40 bar, Ø 52 mm
40 VA, 250~, 15 bar, Ø 30 mm
83
AKONIVEL
Level control level switch for solids, membrane system
Used in signalling, checking and control of grain or powder dry
products, with a maximum diameter of 30 mm and a density between
0.3 and 2.5 g/cm3 flowing in a silo, hopper or conduct.
•Minimum sensitivity:60 grams.
•Operating temperature between –20 ºC y +80 ºC.
•Micro switch contact, 15 A, 250 V~, cosj=1.
•Buna N nitryl membrane.
•Fiber-glass reinforced polypropylene box.
Reference
Description
Family
Pack
AKO-5330
Membrane system level switch
3320
12 Units
Level control level switch for solids, stainless steel rotating scoop system.
Used in signalling, checking and control of grain or powder dry products,
with a maximum diameter of 15 mm flowing in a silo, hopper or conduct.
• Turning speed of 5 r.p.m.
• Operating temperature between –20 ºC y +60 ºC.
• Power supply 230 V~ ±10%, 50/60 Hz.
• Micro switch contact, 6 A, 250 V~, cosj=1.
• Fiber-glass reinforced ABS box.
Reference
AKO-5335
84
Description
Family
Pack
Level switch with rotating scoop
3320
6 Units
www.ako.com
NOTES
AKO Reference
Comments
85
General conditions of sale
Warranty conditions
86
www.ako.com
Family
COLD/HEAT CONTROL - 1000
1510 Industrial refrigeration control
1520 AKOTIM modular controls (HACCP)
1530 Process control. Industrial Heat
1535 PID control
1550 Control panels
1560 Compressors pack controls
1570 Data loggers
1580 Communication and software
1590 Probes and accessories
HEATING CABLES - 2000
2110 Constant wattage parallel cable
2120 Self-regulating parallel cable
2130 2150 2190 Series cable
Drum, tank and special heaters
Accessories
LEVEL CONTROL - 3000
3310 Measurers and level control relays
3315 Switches for liquids
3320 Switches for solids
PROTECTION - 4000
4200 Alarms for refrigeration
4240 Detectors and timers
4400 Alarms for lifts
4100 Protectors for fluorescent lamps
87
INTERNATIONAL
A&P (Asia & Pacific)
a&[email protected]
N&LA (North &
Latin America)
n&[email protected]
EMEA (Europe,
Middle East & Africa)
[email protected]
México
Av. Lomas verdes, 750. OF. 201
CP 53120 Naucalpan
(Estado de México) [email protected]
Portugal
Rua Eucaliptos, 82-Ba. Encarnação
1800-202 Lisboa • Portugal
[email protected]
Present in over 62 countries.
D.L.: B-20957-2007
351000202 REV.02 2010
AKO Electromecánica, S.A.L.
Avda. Roquetes, 30-38 • 08812 Sant Pere de Ribes [Barcelona]
Tel. [+34] 902 333 145 • Fax [+34] 938 934 054 • email: [email protected]

Catalogue - Frigoterm

Transcription

Documents pareils

INT511® Air Flow Monitor

Welcome to this apartment where we wish you a very enjoyable stay

CIATCOOLER ILK-ILKH Using / Applications

High-precision humidity and temperature probe

call for a europe for the people – by the people

E 1 CONVERTER FOR PARALLEL OUTPUTS ENCODERS type

CX4 Installation Manual