Consumer Information for primer caps
Transcription
Consumer Information for primer caps
Consumer Information for primer caps 1. Use 1.1 Intended use Igniters for cartridges, small arms. 1.2 Duration of use Primer caps can be used within 10 years after production. However, the term of guarantee is 2 years after production only. 1.3 Advices on safe handling: No smoking. Keep away from heat sources and open flames. Do not throw article and do not deform (crush) or open it by force. Caution - ignition sensitive to impact! Delivery only allowed in closed original packaging. Use and reloading of cartridges, small arms are only permitted for competent persons with a permit according to article 27 of the Explosives Act (SprengG). Store primer caps inaccessible to children. Wear safety goggles and ear protection during use. Wash hands right after use. Store unused primer caps for safety reasons in the original packaging, not in bulk. 2. Storage Only store in approved packaging in areas provided for it in accordance with the transport regulations (storage class: 1.4, compatibility group: S). Store cool and dry (optimal storage temperature: 20°C). Secure against theft and unauthorized use. Do not store together with combustible or oxidizing substances. 3. Destruction / Disposal Completely used primer caps can be disposed as metal waste. Unused primer caps, which cannot be used for their original purpose any more, have to be disposed of by a qualified disposal facility under consideration of the local official regulations, in particular the dangerous goods regulations (UN 0044, PRIMERS, CUP TYPE, 1.4S). AVV waste key number (according to the waste directory regulation, AVV): 16 04 03 „other waste explosive “(dangerous waste). Before contracting external service enterprises the waste producer has to check whether these have all the necessary authorizations to collect transport and recycle or dispose of these objects. RUAG Ammotec GmbH Kronacher Str. 63 D-90765 Fürth www.ruag.com Sitz der Gesellschaft: Fürth HRB 9128 Amtsgericht Fürth UIN: DE813559845 Steuernummer: 218/136/90060 Aufsichtsratsvorsitzender: Dr. Lukas Braunschweiler Geschäftsführung: Cyril Kubelka, Vorsitzender Georges Hess, Christian Lutz Tel. + 49 911 7930-0 Fax + 49 911 7930-680 [email protected] 4. Declaration of conformity The following EC type test certificates of the Federal Institute for Materials Research and Testing, Berlin (BAM) for primer caps will be available. Anvil primer cap Anvil primer cap Anvil primer cap Anvil primer cap Anvil primer cap Berdan primer cap Berdan primer cap Berdan primer cap Berdan primer cap Berdan primer cap 4,45 mm SINOXID: 5,33 mm SINOXID: 8,02 mm SINOXID: 4,45 mm SINTOX: 5,33 mm SINTOX: 4,5 mm SINOXID: 5 mm SINOXID: 5,5 mm SINOXID: 6,35 mm SINOXID: 6,45 mm SINOXID: 0589.EXP.0678/06 0589.EXP.0679/06 0589.EXP.0680/06 0589.EXP.0681/06 0589.EXP.0682/06 0589.EXP.0683/06 0589.EXP.0864/06 0589.EXP.0685/06 0589.EXP.0686/06 0589.EXP.0687/06 “The RUAG Ammotec GmbH explain the conformity of the hereinafter called articles with the guideline 93 / 15 / EEC to the placing on the market and supervision of explosives for civil uses” 5. Legal information National regulations Germany: Observe any national regulations, in particular - SprengG - WaffG International regulations: Observe any regulations according to the respective national law. Should you need any further information, please do not hesitate to contact us at: [email protected] Fürth, February, 2011 RUAG Ammotec GmbH Kronacher Straße 63 90765 Fürth RUAG Ammotec GmbH Kronacher Str. 63 D-90765 Fürth www.ruag.com Sitz der Gesellschaft: Fürth HRB 9128 Amtsgericht Fürth UIN: DE813559845 Steuernummer: 218/136/90060 Aufsichtsratsvorsitzender: Dr. Lukas Braunschweiler Geschäftsführung: Cyril Kubelka, Vorsitzender Georges Hess, Christian Lutz Tel. + 49 911 7930-0 Fax + 49 911 7930-680 [email protected]