O/So optical smoke detector IQ8Quad with

OSID Imager - 7° coverage
Part-No. 761300
Approval: G211072
Imager for use with OSID emitter (Part No.: 761303 ? 761305).
Image sensor / receiver for smoke detection for open spaces, evaluation. Two
light sources (IR and UV), optical filters, high-speed image capture and intelligent
software algorithms to increase the noise immunity and safety from erroneous /
false alarms, 1 light source can be connected, via sensors and DIP switch
individually configurable.
• Max. Detection range up to 150 m with standard light
source
• 3 levels of sensitivity possible (35 %, 45 %, 60 %)
• Easy DIP switch configuration
• Pollution Monitoring
Air humidity
Weight
Detector specification
Dimensions
20 ... 30 V DC
approx. 8 mA @ 1 imager, 10 mA @ 7 imager
< 150 m
-10 °C ... 55 °C
IP 44 (electronic)
IP 66 (optical housing)
10 ... 95 % (non-condensing)
approx. 651 g
EN 54-12
W: 208 mm H: 136 mm D: 96 mm
© Honeywell International Inc.
Features:
Operating voltage
Current consumption @ 24 V DC
Range
Ambient temperature
Type of protection
Accessories:
OSID Installation Kit
Emitter - Standard Power, battery version
Emitter - Standard Power, wired at 24 V DC
Emitter - High Power, wired at 24 V DC
Subject to change without notice!
761310
761303
761304
761305
Novar GmbH a Honeywell Company
Dieselstr. 2 41469 Neuss
Phone: +49 2131 40615 600
Faximile: +49 2131 40615 606
www.esser-systems.com
[email protected]