Sourcefire Product Datasheet

Sourcefire® 3D7000 Series Appliances
Enterprise Management, Uncompromising Performance
The modern network is diverse. Infrastructure is typically designed and
implemented on a per-project basis focused on the needs of the immediate
project or application being delivered. Over time, this leads to a wide variety
of throughput, latency, connectivity, and security requirements in different
areas of a single organization. In an ideal situation, you could select a
security appliance to protect the network based on the network performance
requirements of the location. In practice, the selection isn’t that straightforward
because security appliances with different throughput often have different
features as well. As a result, some some organizations buy appliances
with more throughput than they need to achieve some measure of feature
standardization. Being forced to make such compromise is clearly not optimal
and often wasteful..
Introducing the 3D7000 Series Appliances from Sourcefire
The 3D7000 Series appliance perfectly complements the higher throughput
3D8000 Series Appliances from Sourcefire. Providing feature parity across
the complete appliance range, the 3D7000 Series and 3D8000 Series enable
you to deploy security appliances based on the needs of the network link,
not supplemental features. This eliminates over-buying while still achieving
standardized features and management ease.
Shared Features
• Solid state storage
• Integrated lights out
management
•LCD displays and control panel
• SNMP monitoring
• Simplified command line
interface
• Integrated recovery drive
•Programmable fail-open
interfaces
•Redundant power supplies
FIREPower™ Performance
Just because a network link may be slower doesn’t mean the data it carries
is any less critical. Sourcefire understands this and has included FirePOWER
technology across the complete 3D7000 Series appliance range. FirePOWER
is the Sourcefire universal security architecture that delivers best-in-class
performance, availability, reliability, and low-latency security.
PERFORMANCE CHOICE WITHOUT COMPROMISE
In the 3D7000 Series appliances, the best technology and features are not
reserved for only the most expensive models. Gain features such as redundant
power supplies, low-latency inspection, and lights out management without
having to buy a model with more throughput than you need.
sourcefire 3D7000 Series
model
3D7110
3D7120
Performance and Functionality
IPS Throughput*
500Mbps
1Gbps
FirePower™
Yes
Yes
Modular Interfaces
No
No
Monitoring Interfaces
(8) 1Gbps copper
(8) 1Gbps copper
Programmable Fail Open Interfaces
Yes
Yes
Management Interfaces
RJ45
RJ45
Management Interface Speed
10/100/1000
10/100/1000
Typical Latency
<150 microseconds
<150 microseconds
Memory (RAM)
16GB
16GB
Lights Out Management
Yes
Yes
Stackable
No
No
Dual Power Supplies
Yes
Yes
Cooling Fans
5
5
*Exact network performance experienced will vary depending on conditions outside of the control of
Sourcefire, including the protocol mix and average packet size inspected.
To learn more, visit us at www.sourcefire.com or contact Sourcefire or a
member of the Sourcefire Global Security Alliance today.
©2011 Sourcefire, Inc. All rights reserved. Sourcefire, the Sourcefire logo, Snort, the Snort and Pig logo, ClamAV, Immunet and certain other
trademarks and logos are trademarks or registered trademarks of Sourcefire, Inc. in the United States and other countries. Other company,
product and service names may be trademarks or service marks of others.
12.11 | rev1