Leafflet Penrite Web French

TECHNICAL DATA SHEET
®
HIGHT MELT
Special high melt grease, ideal for ball bearings exposed to outside air, through
resistance to centrifugation and water projections. This waterproof grease with
Molybdene must be used for lubrication of chassis and suspension
(ball-and-socket joints, rack-and-pinion steering, etc.). This grease is also ideal
for engine assembly and lubrication of cam shafts and tappets.
®
EMB 78870
Graisse spéciale roulement à haut point de fusion, idéale pour les roulements
exposés à l’air libre, par sa résistance à la centrifugation et aux projections
d’eau. Cette Graisse hydrophobe au Molybdéne doit également être utilisée
pour la lubrification des chassis et suspension.(Rotules, Crémaillère etc...) . Cette
graisse est également idéale pour l’assemblage moteur et la lubrification des
arbres à cames et poussoirs.
Specially formulated for classic.
Spécialement formulée pour les véhicules anciens.
REFERENCE: DYN12 High Melt Grease
APPLICATION: Multi-usage grease
Special high melt grease, ideal for ball bearings exposed to outside air, through resistance to
centrifugation and water projections. This waterproof grease with Molybdene must be used for
lubrication of chassis and suspension (ball-and-socket joints, rack-and-pinion steering, etc.). This
grease is also ideal for engine assembly and lubrication of cam shafts and tappets.
WARNING: (Do not apply this grease on pistons as its lubricating power is such that it would
prevent running in of the rings).
To be used in the following applications:
• Wheel Bearing including car with disc brake.
• Plain Bearing
• Slow speed anti friction bearing
• Chassis grease
• General plant lubrication
Specification :
• Grade NLGI 2 Lithium Molybdenum Disulphide
Benefits :
•
•
•
•
Extend bearing and gear life by minimizing shock loads
Does not Splash
Resist leakage, Resist squeeze out
Water wash out resistance, protect against rust and corrosion.
Characteristic :
Typical Properties
Grade NLGI
Color
Soap
Dropping Point
Work Penetration 60 strokes @ 25°C
4 Ball EP Test
UNIT
Laboratory
°C
1/10 mm
KG
ASTM D 2265
NFT 60-132
Average characteristics
Value
2
Black
Complex X
190°
280
315