ASC044 - Didatec

ASC044
SPEED LIMITER AND EMERGENCY BRAKE
SYSTEM
Experimental capabilities
-
Removing and replacing of the limiter cable and system setting
Removing and replacing of a pad
Removing and replacing the limiter tensioner counterweight and
adjusting it
Setting the linkage of the parachute
Adjustment of the parallelism of the elevator guides and lubrication
thereof
Change the setting of the theoretical engagement speed of the limiter
Theoretical setting of operation of the bistable limiter catch sensor on
the system
Theoretical setting of operation of the burst sensor of bistable cablet on
the system
Functional analysis, kinematics and dynamics, effort and time
calculations of the limiter
DIDATEC– Zone d’activité du parc – 42490 FRAISSES- FRANCE
Tél. +33(0)4.77.10.10.10 – Fax+33(0)4.77.61.56.49 – www.didatec-technologie.com
email : [email protected]
Reproduction interdite / copy prohibited– Copyright DIDATEC mai-16- page 1
Dans le cadre de l’amélioration permanente de nos produits, ce descriptif technique est susceptible d’être modifié sans préavis
As part of the continuous improvement of our products, this technical specification may be modified without previous notifying
Illustrations non contractuelles / Illustrations not contractual
version : FT-ASC044-STD-B
ASC044
Illustrations
Technical details
1. SPEED LIMITER 2 WAYS WITH
PULLEY 200 MM
2. MANUAL WINCH OF DISPLACEMENT
3. PENDULUM OF THE LIMITER
4. GUIDES OF EACH SIDE
5. LAYOUT CABIN ELEVATOR
EQUIPPED WITH PADS
6. Cablet Ø6mm PASSING THROUGH
THE TWO PULLEYS AND
CONNECTED TO PARACHUTE
LINKAGE BY THE LEVER
7. LOW TRAVERSE TB3 PARACHUTE
DUAL DIRECTION
8. OPERATING LEVER OF LINKAGE OF
THE PARACHUTE
9. LIMITER TENSIONER DUAL
DIRECTIONS WITH PULLEY 200 MM
10. WEIGHT OF TENSIONER
11. TWO TRAVERSES FOR RESTING
THE CABIN ENSEMBLE DOWN
12. ALUMINIUM STRUCTURE ANODISED
MOUNTED ON LOCKING SWIVEL
CASTERS
1 : Overview
2 : Presentation of the dual direction limiter mounted on a elevator
Services required


Dimensions: (LxWxH mm): 1000 x 800 x 1750
weight (Kg): 110
Note : if the equipment installation is operated by our staff, all supplies and exhaust
connections required must stand at less than 2m from the machine
Documentation



User’s manual
Technical documentation of the components
Certificate of conformity CE
DIDATEC– Zone d’activité du parc – 42490 FRAISSES- FRANCE
Tél. +33(0)4.77.10.10.10 – Fax+33(0)4.77.61.56.49 – www.didatec-technologie.com
email : [email protected]
Reproduction interdite / copy prohibited– Copyright DIDATEC mai-16- page 2
Dans le cadre de l’amélioration permanente de nos produits, ce descriptif technique est susceptible d’être modifié sans préavis
As part of the continuous improvement of our products, this technical specification may be modified without previous notifying
Illustrations non contractuelles / Illustrations not contractual
version : FT-ASC044-STD-B