Industrial USB Flash Module

Commentaires

Transcription

Industrial USB Flash Module
Industrial USB Flash Module
The PS2251-03 UFM (USB Flash Module) supports USB 3.0, 2.0 and 1.1 interfaces to
the NAND flash memory. This USB Flash Module is specially designed for motherboard
and built-in to the PC/Notebook/IA system. By using this UFM solution, it will reduce a
lot of efforts which was needed from R/D to production, as well as simplifying the
RMA problems. It supports USB Mass Storage function and supports for USB boot
function from BIOS. This solution provides not only easy to install, but also fast, easy to
use and low cost way for user.
Specification
Solution
PS2251-03
Capacity
1GB~64GB
USB specification revision 1.1, 2.0., and 3.0
Compliance
Flash Memory
SLC/MLC/pSLC
Read: up to 34 MB/s
Performance*1
Power Consumption*
Write: up to 29MB/s
1
Active mode: < 136 mA
Storage, Recording, Back up, Boot device, and Database in Server, Industrial
General Applications
PC/machines, Military/Defense & Aero, Transportation System,
Telecommunication, and Digital Signage
Operating Voltage
DC 4.5V ~ 5.5V directly from USB port
0°C ~ 70°C (Silver)
Operating Temperature
Reliability*
2
-40°C ~ 85°C (Diamond)
USB specification, IEC, MIL-STD-810, ISTA 2 Series
MTBF
Quality
More than 3,000,000 hours
Products are tested with both operational and non-operational status to ensure
the highest qualities.
1
* Performance and Power Consumption may differ according to flash type, flash configuration, and platform.
2
* All reliability tests follow international standards
Features
Error Correcction Code (ECC), Static/Dynamic Wear leveling, Bad Block Management, Pseudo SLC (pSLC)

Documents pareils