Type FKA-EU - TROX France

Page d'accueil > Produits > Protection Incendie > Clapets coupe-feu > Type FKA-EU
Type FKA-EU
Complies with the requirements of EN 15650
Tested for fi re resistance properties according to EN 1366-2
Classifi ed according to EN 13501-3
Robust and rigid sheet steel casing
Integration into the central BMS with TROXNETCOM
DoP / FKA-EU / DE / 2013 / 001
DESCRIPTION
In case of a fi re, fi re dampers shut automatically to prevent the
propagation of fi re and smoke through ductwork to adjacent designated fi
re compartments. The type FKA-EU fi re dampers are tested to EN 1366-2
and comply with 15650. In addition to this, national guidelines must be
complied with.
Correct approved installation locations are in solid walls and ceiling slabs,
remote from solid walls, and in lightweight partition walls. Airfl ow direction is
not critical. For installation in a horizontal duct, the damper blade shaft must
be horizontal.
In the case of fire, the damper is triggered either by a fusible link at 72 °C
or thermoelectrically with a spring return actuator. The release mechanism
is accessible and can be tested from the outside.
Home Contacts Imprint Conditions de livraison et de paiement Confidentialité Réserve
30/09/2016 © TROX
France Sarl
Page d'accueil > Produits > Protection Incendie > Clapets coupe-feu > Type FKA-EU
TROX France Sarl
Online-Services
Service-Hotlines
État des commandes (Mon
TROXNET)
Ventes France et consultation
TROX Academy
Tél. +33 1 56 70 54 54
technique
Contact
Votre contact
Formulaire de contact en ligne
Recherche Produit A-Z
2, place Marcel Thirouin
F-94150 Rungis (Ville)
Certificat TÜV Iso 9001
Tél.: +33 1 56 70 54 54
Home Contacts Imprint Conditions de livraison et de paiement Confidentialité Réserve
30/09/2016 © TROX
France Sarl