Universal Automation Server and Gateway for
Transcription
Universal Automation Server and Gateway for
Press Release NEWRON SYSTEM SA Serge LE MEN 33 rue Paul Gauguin 31100 Toulouse FRANCE Tel: +33 (0)561 151 845 Fax: +33 (0)561 151 644 Mob: +33 (0)620 761 081 [email protected] www.newron-system.com Universal Automation Server and Gateway for BMS standard protocols Building Management Systems (BMS) are handling a growing amount of information through several standard protocols. A centralized solution is highly limited in term of speed, evolution and performance. A better solution is to decentralize field data management and serve information to supervision through BACnet. doGate is a true BACnet Building Controller that acquires field information from several protocols, proposes gateway function between protocols, includes a scheduling , monitoring and alarming engine and behaves as a true BACnet server to connect SCADA systems. It also proposes an OPC interface. doGate is a multi-protocol data collector including Scheduling, Trending, Alarming, Gateways and serving information to BACnet. Nowadays quite some standards protocols co-exist: BACnet, LonWorks, KNX, M-Bus but also de facto standards such as Modbus, OPC ... Systems are becoming multi protocol and BACnet is the standard to oversee information. doGate embeds doMoov - an operating system to manage BMS standards – and gets the benefit of the entire enhanced functions of that OS. A universal and improved data acquisition server for BMS Standards BMS networks are becoming larger and larger and the amount of information to acquire through an HMI or a SCADA system is always increasing. A good system has to optimize data acquisition and decentralize functions. doGate allows such a decentralized acquisition: it includes an innovative multi protocol data server engine (LonWorks, BACnet, KNX, Modbus, M-Bus, OPC). That multi thread engine dramatically reduces SCADA initialization time and significantly improves performances. A true BACnet Building Controller mapping every standard protocol to SCADA Field information has to be forwarded to SCADA system. BACnet is the real interoperable standard way to perform that important operation. doGate proposes an easy mapping from every field data point coming from any BMS standard protocol to a native BACnet interface. It also proposes to manage alarms, schedule and trend of any datapoint coming from any protocol through a native and interoperable BACnet interface. In case SCADA or HMI system does not support BACnet, doGate also proposes a standard OPC server interface. A universal BMS gateway between every field protocol We broadly need to exchange information between field protocols and doGate natively includes that function. It includes a connectivity platform between the BMS Standards protocols (LonWorks, BACnet, KNX, Modbus, M-Bus, OPC). doGate proposes a 1 to 1 or n to n mapping. It embeds the complete catalogue types and manages standard types for you. doGate also includes a scheduling engine to manage calendars and schedulers on any datapoint. A dashboard for an easy configuration doGate strength is its simplicity to configure and its standard database interoperability. It interfaces with any LNS database for LonWorks, also manages exported ETS databases for KNX and imports every BACnet EDE file. For existing networks, doGate is able to create its database from a network scan or a CSV file import. Dashboard also includes powerful doGate management function: test, repair, download, replace, backup/restore, remote access … A brand new and innovative architecture using the IP convergence. Nowadays only 2 architectures coexist: centralized and decentralized. Centralized architecture is made of a SCADA system connected to a flat network through routers. That is low cost but very bad performances, old fashioned and not reliable because if SCADA fails … Decentralized architecture offers automation server connected one side over IP and the other side on the field network. Each automation server performs data acquisition and automation function. Performance is far better, that is more robust but that is very expensive and over dimensioned. Moreover there is a true lack of interoperability between devices connected to separate automation servers and SCADA only see the server representation of the devices. doGate enables a true IP convergent system offering the complete function of a decentralized architecture at lower cost and more performances. Here every layer is connected to IP. IP network interconnects SCADA, routers and automation server (doGate). Then SCADA system can outsource acquisition/automation to one or several doGate but can also directly access to devices through routers. That is a pure IP and flexible architecture bringing more function at a minimum cost: you basically save at least 30% compared to a decentralized architecture. About Newron System Founded in 1993, NEWRON SYSTEM is the European leading company in software and tools for building management systems. We are specialized in open standards such as LonWorks, KNX, BACnet, M-Bus, Modbus, OPC … Our tools are recognized to fit field requirements and have been cultivated from our job experience. We are out of the application but propose everything around to make a Building Management System with any manufacturer device based on these open systems. We committed our job site and field expertise to providing integrators an easy, cost effective and reliable software range to install, configure, manage, pre-commission and prepare SCADA system. Our aim is to reduce integration time and cost and ease system design. We are now proposing a complete range of software to manage, maintain and supervise networks based on open and standard protocols such as LonWorks, BACnet, KNX, M-Bus, Modbus and OPC … System builder is nowadays required for modern Building Management Systems. We have channelled our experience and expertise into developing an Operating System for building management systems: DoMooV. That Operating System is a multi protocol middleware for Building Management Systems. This framework is a software platform that integrates the open BMS standard protocols into a unified platform. DoMooV software framework provides an infrastructure to integrate diverse systems and devices - regardless of manufacturer or communication protocol - into a unified platform that can be easily managed and supervised. DoMooV fully abstracts the system including commissioning! Serge LE MEN – NEWRON SYSTEM [email protected] Distributed architecture over IP– fully use IP convergence doGate views doGate communication ports