c-200 fixture - Color Kinetics
Transcription
c-200 fixture - Color Kinetics
C-200 FIXTURE Wiring Diagram STANDALONE MODE C-200 Fixture Power 24V DC BNC Connector EXTERNAL CONTROL MODE C-200 Fixture Power 24V DC BNC Connector RJ45 Connector Data Input DMX 512 c-200 fixture P O W E R E D B Y ® C H R O M A C O R E Color Kinetics® C-200 is the largest and brightest fixture in the C-Series. This fixture projects a soft-edge beam of light at a 22° beam angle. C-200 fixtures operate in either Stand Alone or external control mode. Using on-board intelligence, they run a pre-programmed assortment of shows including color washes, random color changes, fixed colors, ultra smooth cross fades, and strobes. Shows can then be varied by speed, direction, saturation, etc. Alternatively, C-200 fixtures can be controlled via DMX512 (RS485) networks for the ultimate in flexibility and control. C-200 fixtures operate from the C-Series Power Supply and the Multi Output Power Supply. These power supplies accept input voltages between 100--240V AC. C-200 fixtures are made from extruded aluminum with a black anodized finish and come equipped with a diffuser lens and hanging yoke. C- 2 0 0 S P E C I F I C A T I O N S COLOR RANGE SOURCE BEAM ANGLE HOUSING CONNECTORS LISTINGS 16.7 million (24bit) additive RGB colors; continuously variable intensity output range High brightness colored LEDs 22° Black aluminum RJ45 data connectors, BNC power connector UL Listed, CE Certified C O M M U N I C AT I O N S P E C I F C AT I O N S DATA INTERFACE CONTROL DMX512 (RS485) compatible; serial port compatible with Smart Jack Adapter Stand Alone or DMX512 (RS485) E L E C T R I C A L S P E C I F I C AT I O N S POWER REQUIREMENT POWER CONSUMPTION POWER SUPPLY 24V DC Maximum: 24 Watts C-Series Power Supply (ITEM# 109-000001-00), Multi Output Power Supply (ITEM # 109-000002-00) DESCRIPTION OF SHOWS FIXED COLOR COLOR WASH CROSS FADE RANDOM COLOR FIXED COLOR STROBE VARIABLE COLOR STROBE Static display of a single color Colors transition gracefully from color to color, cycling through the entire color wheel Colors cycle back and forth gracefully between two colors Colors step or jump from one color to the next in random order A constant color appears in a rapid series of intense flashes of light A sequence of colors appear in a rapid series of intense flashes of light M A N U FA C T U R I N G D ATA To ensure the highest level of product reliability, this Color Kinetics design endured accelerated life test conditions including an operating temperature span of 360°F and cyclic loading up to 60G. ITEM# 100-000003-00 U.S. PATENTS 6,016,038, 6,150,774 AND 6,211,626 OTHER PATENTS PENDING ©2001-2002 Color Kinetics Incorporated. All rights reserved. Chromacore, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorPlay, iColor, iPlayer, and Smartjuice are registered trademarks, and ColorScape, iColor Cove, and QuickPlay are trademarks of Color Kinetics Incorporated. All other brand or product names are trademarks or registered trademarks of their respective owners. BR0008 Rev 07 Specifications subject to change without notice. WARNING: The power must be OFF before installing or removing the product. The DMX address should be assigned BEFORE the product is installed. SOURCE LIFE Color Kinetics illumination products utilize high brightness LEDs as the illumination source. LED manufacturers predict LED life of up to 100,000 hours MTBF (mean time between failure), the standard used by conventional lamp manufacturers to measure source life. However, like all basic light sources, LEDs also experience lumen depreciation over time. So while LEDs can emit light for an extremely long period of time, MTBF is not the only consideration in determining useful life. LED lumen depreciation is affected by numerous environmental conditions such as ambient temperature, humidity and ventilation. Lumen depreciation is also affected by means of control, thermal management, current levels, and a host of other electrical design considerations. Color Kinetics systems are expertly engineered to optimize LED life when used under normal operating conditions [ambient temperature: -4º F to 104º F (-20º C to 40º C), humidity: 0-95% non-condensing humidity, adequate ventilation and air volume] and when operated using typical color-changing effects. Long-term operation outside of these ranges or conditions, or at the upper limits of these ranges or conditions, may subject the product to further degradation of the LED source life, or in extreme cases, failure of internal components. Source life information is based on LED manufacturers‘ data, as well as other third party testing. U.S. AND FOREIGN PATENTS AND PATENTS PENDING Color Kinetics Incorporated grants the purchaser of its lighting products and controllers a personal and non-transferable license to use Chromacore®, its patented technology for networkable control of LED-based color-changing lighting fixtures for illumination, display and design. This license is granted only by Color Kinetics Incorporated, and may not be transferred except by the grantor. The design, duplication, manufacture, or sale of other products using networkable control of LED-based color-changing lighting may be prohibited and is not licensed hereunder. Other patents pending. Color Kinetics Incorporated • 10 Milk Street, Suite 1100 • Boston, MA 02108 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • [email protected] • www.colorkinetics.com C-200 FIXTURE photometric performance GAMUT SOURCE SPECIFICATIONS CIE 1931 Standard Observer 0.9 Optics: Polycarbonate diffuser Source: 192 LEDs 0.8 (72 Red, 60 Green, 60 Blue) 0.7 Beam Angle: 22° (at 50% of peak illuminance) Distribution: Symmetric direct illumination CCT: Adjustable 1,000K–10,000K CRI: Not measurable (CIE 13.3-1995) y Axis 0.6 0.5 0.4 0.3 ILLUMINANCE DISTRIBUTION 0.2 0.8 1.5 7.5 1.5 13.3 2.3 1.5 25.0 79.3 25.0 9.0 35.4 9.0 2.3 13.1 9.0 2.3 19.9 9.0 13.5 0.1 0.2 0.3 0.4 0.5 x Axis 0.6 0.7 0.8 White point shown by diamond. 20.6 4.0 CANDLE POWER DISTRIBUTION 0’/0m 2.3 82.1 0 20.5 1.5 36.3 1.5 20.2 0.0 0.0 2.3 83.0 80.1 0.1 7.6 1.5 37.3 224 79.3 1.5 4.0 227 222 4.0 7.4 25.0 3.0’/1.0m 0.8 13.5 83.0 224 9.0 13.1 0.8 25.0 80.1 19.9 9.0 82.1 9.0 1.5 20.6 9.0 36.3 20.2 2.3 20.5 4.0 13.2 2.3 2.3 13.3 0.8 13.2 7.5 3.0’/1.0m 3.0’/1.0m 3.0’/1.0m 0’/0m Units: Measured on: Distance from surface: Multipliers: -90 Footcandles/Lux White 3’/1m (from center of grid) 0.31 Red, 0.54 Green, 0.16 Blue 90 0 250 500 750 1000 1250 Horizontal and Vertical (solid line) [Candelas] Measured on: Beam center: Thin dashed lined: Multipliers: White 1160 cd Indicates 50% of peak 0.31 Red, 0.54 Green, 0.16 Blue ILLUMINANCE COLOR WHITE RED GREEN BLUE 3’ 6’ 9’ 1m 128.9 32.2 1159.7 40.0 185.5 14.3 10.0 8.1 4.4 17.4 5.2 COLOR TOTAL OUTPUT POWER EFFICACY (LUMENS) (WATTS) (lm/W) 250.0 25.0 10.0 70.5 8.1 8.7 141.5 9.0 15.7 41.3 9.0 4.6 1.6 4.4 14.4 2.8 39.1 1.3 20.6 LIGHT OUTPUT 46.4 22.5 69.6 2.3 46.4 5.2 2.5 7.7 5m 72.5 39.9 156.6 15’ 4m 128.9 89.9 626.2 20.6 3m 289.9 359.5 69.6 12’ 2m WHITE RED 25.0 GREEN 0.8 11.6 7.4 BLUE Measured in Footcandles/Lux on axis. Color Kinetics Incorporated • 10 Milk Street, Suite 1100 • Boston, MA 02108 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • [email protected] • www.colorkinetics.com C-200 FIXTURE physical dimensions BACK VIEW F R O N T VIEW YOKE 7.90" THUMB SCREW (198 mm) DIP SWITCHES LOCK WASHER BNC CONNECTOR POWER IN WASHERS RJ45 MODULAR JACK DATA OUT POWER IN DATA OUT DATA IN REPEATER RJ45 MODULAR JACK DATA REPEATER RJ45 MODULAR JACK DATA IN TOP VIEW SIDE VIEW 4.10" (104 mm) 1/4" (6 mm) MOUNTING HOLE (2X) 3/8" (8 mm) MOUNTING HOLE 5.00" (127 mm) 5.90" (150 mm) POWER IN DATA IN .50" (13 mm) 8.20" (208 mm) 4.30" (109 mm) 4.50" (114 mm) C-200 FIXTURE ITEM# 100-000003-00 WEIGHT 2 lbs 12 oz (1.2 kg) DATA RJ45 data input, output and repeater ports POWER CONNECTOR BNC connector – female POWER REQUIREMENT 975 mA @ 24 V DC (24 W) Color Kinetics Incorporated • 10 Milk Street, Suite 1100 • Boston, MA 02108 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • [email protected] • www.colorkinetics.com