CV_CLUZEL_Francois_CIFRE_ALSTOM V2 En - LGI

François CLUZEL
75 avenue de la division Leclerc
92290 Châtenay-Malabry
France
℡ +33 (0) 6 30 15 29 43
[email protected]
http://www.lgi.ecp.fr/pmwiki.php/PagesPerso/FCluzel?setlang=en
Age: 25
French nationality
PhD candidate in Industrial Engineering/Eco-design
at Alstom Grid/Ecole Centrale Paris
Engineer degree in Mechanical Engineering
at Supmeca Paris
EDUCATION & WORK EXPERIENCE
2009-2012
PhD thesis in Industrial Engineering: Eco-design of complex industrial systems:
application to AC/DC conversion substation for the aluminium industrys.
This industrial PhD thesis is a French CIFRE contract between Alstom Grid and the
Industrial Engineering Laboratory of the Ecole Centrale Paris (a leading French
“Grande Ecole”).
The thesis is supervised by:
- Pr. Bernard Yannou (Ecole Centrale Paris), thesis director,
- Pr. Dominique Millet (Supmeca),
- Dr. Yann Leroy (Ecole Centrale Paris).
2007-2008
Research master degree in Industrial Engineering from the Ecole Centrale Paris, a
leading French “Grande Ecole”.
Speciality Innovation, Design & Engineering
2005-2008
Mechanical engineering degree from Supméca Paris, a French “Grande Ecole”.
Speciality Mechanical Structures and Systems
2003-2005
“Classe Préparatoire aux Grandes Ecoles” (preparing students for the French
“Grandes Ecoles” entrance exams) in Physics and Mathematics at the Lycée
Louis-Le-Grand.
PROJECTS & TRAINING PERIODS
2008
6-months training period at the Industrial Engineering Laboratory of the Ecole
Centrale Paris. 2 subjects were addressed:
• Literature study to develop a model to optimize the technological choices in
sustainable buildings;
• Realization and analysis of user tests to validate an Evolutionary Design model
for car silhouettes sketching.
2007-2008
Dissertation topic on Evolutionary Design for car silhouettes sketching, at the Ecole
Centrale Paris.
2007
6-months training periof in a testing laboratory at the R&D Racket Sports
department, Head Sport AG, Austria.
Update 03/08/2011
TECHNICAL SKILLS
Computer
Languages
Simapro, Microsoft Office, Catia, Java programming language
French: mother tongue
English: good skills, both written and oral (TOEIC 825)
German: good skills, both written and oral (Zertifikat Deutsch “sehr gut”)
TEACHING ACTIVITIES
Management of industrial internships at Alstom Grid
2011
Development of a parameterized model to build LCA scenarios for an AC/DC
conversion substation
2010
Life Cycle Assessment of an AC/DC conversion substation
Management of academic innovative projects at the Ecole Centrale Paris
2011
Geographic information systems for Life Cycle Assessment
2010
Genetic algorithms for car silhouettes design
Teaching at the Ecole Centrale Paris
2009-2012
Teaching assistant of the Innovative Design for Products and Services curse of Pr.
Bernard Yannou (15 hours/year).
INTERESTS
Sport
Music
Other
Tennis, running, mountain biking, skiing, trekking, mountaineering
Piano, guitar, bass
Sustainable development, gastronomy, travels
SCIENTIFIC PUBLICATIONS
Submitted papers
Cluzel F., Yannou B., Afonso D., Leroy Y., Millet D., “Proposition of an adapted management
process to evolve from unsupervised LCA of complex industrial systems towards an ecodesigning organization”, submitted to Concurrent Engineering: Research and Applications.
Cluzel F., Yannou B., Leroy Y., Millet D., “Towards the eco-design of complex industrial systems:
LCA of an AC/DC conversion substation”, submitted to IDETC/CIE 2011, Washington DC, USA,
August 29-31, 2011.
Yannou B., Cluzel F., Dihlmann M., “How to Stimulate Designer’s Creativity About Car Shapes?
An Interactive Sketching and Exploration Approach Without any Knowledge Prerequisite”,
submitted to Journal of Mechanical Design.
Peer reviewed international journals
Cluzel F., Yannou B., Dihlmann M., “Putting the designer in the loop of a genetic design
platform for the selection of two-dimensional concept shapes. Does it work and is it efficient?”,
to be published in International Journal on Interactive Design and Manufacturing.
Peer reviewed international conferences
Cluzel F., Yannou B., Afonso D., Leroy Y., Millet D., Pareau D., “Managing the complexity of
environmental assessments of complex industrial systems with a Lean Six Sigma approach”,
Proc. CSDM 2010: Complex Systems Design & Management 2010, Paris, France, October 27-29,
2010.
Cluzel F., Millet D., Leroy Y., Yannou B., “Relative contribution of a subsystem to the
environmental impact of a complex system: application to aluminium electrolysis conversion
Update 03/08/2011
substations”, Proc. IDMME – Virtual Concept 2010, Bordeaux, France, October 20-22, 2010.
Cluzel F., Yannou B., “Efficiency assessment of an evolutive design system of car contours”,
Proc. ICED 09: International Conference on Engineering Design, Stanford, AC/USA, August 2427, 2009.
Cluzel F., Yannou B., Dihlmann M., “User tests fort the convergence of a car silhouettes design
model using an Interactive Genetic Algorithm”, Proc. IDMME - Virtual Concept 2008, Beijing,
China, October 8-10, 2008.
Yannou B., Dihlmann M., Cluzel F., “Indirect encoding of the genes of a closed curve for
interactively create innovative car silhouettes”, Proc. International Design Conference - Design
2008, Dubrovnik, Croatia, May 19-22, 2008.
Peer reviewed French conferences
Cluzel F., Yannou B., “Evaluation subjective de profils évolutifs de voiture”, in CONFERE 2008,
15ème Colloque des Sciences de la Conception et de l’Innovation, Angers, France, July 3-4,
2008.
Technical reports
Cluzel F., Yannou B., Dihlmann M., “Evolutive design of car silhouettes using an Interactive
Genetic Algorithm”, Technical report (Cahiers de recherche 2010-22), Laboratoire Génie
Industriel, Ecole Centrale Paris, Chatenay-Malabry, France, 2010. Available online at
http://www.lgi.ecp.fr/Biblio/PDF/CR-LGI-2010-22.pdf
Popular scientific papers
Yannou B., Bertoluci G., Leroy Y., Ghaffari A., Cluzel F., “La conception durable (Partie II) :
applications industrielles”, Centraliens, n°610, avril 2011.
Yannou B., Bertoluci G., Leroy Y., Ghaffari A., Cluzel F., “La conception durable (Partie I) :
enjeux et outils”, Centraliens, n°609, mars 2011.
Update 03/08/2011