SOLARWATT Glass-Foil Solar Modules

SOLARWATT
Glass-Foil Solar Modules
���������������������������������
The SOLARWATT M230-96 GET LK Solar Modules developed for power grid
connected photovoltaic systems integrate the well-known properties of all
SOLARWATT´s modules such as a high quality, large energy yields and very
low power tolerance with an efficient installation and an outstanding cost
effectiveness.
SOLARWATT M230-96 GET LK
By using high-efficient polycrystalline solar cells of an efficiency
up to 15% a high power density will be obtained on roofs.
The modules are equipped with Tyco plug connectors that are
touch-safe and protected against polarity reversal.
monocristalline solar cell
with 15 - 17% efficiency,
125 x 125 mm
1054
1604
SOLARWATT AG
Maria-Reiche-Straße 2a
01109 Dresden, Germany
Tel. +49 (0) 3 51 / 88 95-0
Fax +49 (0) 3 51 / 88 95-111
www.solarwatt.de
[email protected]
Certified acc. to:
DIN EN ISO 9001 and 14001
SOLARWATT Solar modules M230-96 GET LK
are noted for:
Efficient, low-loss energy production
Certified materials and quality of workmanship
25 years warranty to power output according to SOLARWATT’s Limited Warranty Conditions
Subject to change without notice. 2007/08
Specification
M230-96 GET LK
Nominal Power Pmax @ STC*
215 Wp
220 Wp
225 Wp
230 Wp
235 Wp
240 Wp
245 Wp
250 Wp
typ. Nominal Voltage Umpp @ STC*
47,0 V
47,4 V
47,6 V
47,7 V
47,8 V
48,0 V
48,1 V
48,3 V
typ. Nominal Current Impp @ STC*
4,58 A
4,65 A
4,74 A
4,83 A
4,92 A
5,01 A
5,10 A
5,18 A
typ. Open Circuit Voltage UOC @ STC*
58,3 V
58,5 V
58,7 V
58,9 V
59,1 V
59,2 V
59,3 V
59,4 V
typ. Short Circuit Current ISC @ STC*
5,07 A
5,13 A
5,21 A
5,28 A
5,40 A
5,50 A
5,60 A
5,65 A
Off-load voltage rating
58,3 V
58,5 V
58,8 V
59,4 V
59,7 V
59,2 V
58,9 V
58,9 V
45 ° C
NOCT **
typ. Nominal Power Pmax @ NOCT**
155 Wp
158 Wp
162 Wp
166 Wp
169 Wp
173 Wp
176 Wp
180 Wp
typ. Nominal Voltage Umpp @ NOCT**
41,5 V
41,9 V
42,1 V
42,1 V
42,2 V
42,4 V
42,6 V
42,7 V
typ. Open Circuit Voltage UOC @ NOCT**
52,8 V
53,0 V
53,3 V
53,8 V
54,1 V
53,6 V
53,4 V
53,8 V
typ. Short Circuit Current ISC@ NOCT**
4,08 A
4,13 A
4,19 A
4,25 A
4,35 A
4,43 A
4,51 A
4,55 A
Module efficiency reduction at 200 W/m ***
-0,2 %
-0,2 %
-0,2 %
-0,3 %
-0,3 %
-0,3 %
-0,3 %
-0,3 %
2
typ. Temperature Coefficient of PN
-0,50 %/K
typ. Temperature Coefficient of Uoc
-0,37 %/K
typ. Temperature Coefficient of ISC
+0,03 %/K
Max. System Voltage
1000 V
IP protection level
IP 65
Reverse current power rating IR***
15 A
Module Technology
Module Design
No. and Type of Solar Cells
Cables
Bypass-Diodes
Dimensions (LxWxH)
Weight
Glass-Foil-Laminate
Cover material: high transparent solar glass (tempered), 4 mm
Encapsulation: EVA-Solar Cells -EVA
Back material: Tedlar-Polyester-Tedlar, white
96 monocrystalline solar cells, 125 x 125 mm
Junction box with Tyco Plug connector cables, 2 x 4 mm2, length: each 1.2 m
4 pcs.
1604 x1054 x 5 mm
24 kg
Operating Temperature Range
-40 ... +80 °C
Ambiente Temperature Range
-40 ... +45 °C
Mechanical ratings
Qualifications
2.400 Pa approved (Wind speed 130 km/h with safety factor 3)
IEC 61215 (Ed. 2 in preparation), Safety Class II, IEC 61730 in preparation
Measuring tolerances
Pmax @ STC ± 5%, all other electric parameters ± 10%
This data sheet conforms to DIN EN 50380:2003
* STC : Standard Test Conditions, conditions de mesure : Intensité d’irradiation 1000 W/m2, répartition spectrale AM 1,5, température 25±2 °C, selon norme EN 60904-3
** NOCT : Normal Operation Cell Temperature, conditions de mesure : Intensité d’irradiation 800 W/m2, AM 1,5, température 20 °C, vitesse du vent 1m/s, marche à vide électrique
*** Baisse du rendement des modules avec la diminution de l’intensité d’irradiation de 1000 W/m2,à 200 W/m2, température 25 °C, selon norme EN 60904-1
**** Courant de retour admissible L’utilisation d’une alimentation externe n‘est autorisée sur les modules qu‘à condition d‘utiliser un fusible calibré à < 3 x ISC @ NOCT**