HVOF Carflon - Slidcoat - Métallisation Nord Industrie
Transcription
HVOF Carflon - Slidcoat - Métallisation Nord Industrie
REVETEMENTS MULTI-COUCHES A BASE DE PTFE PROCEDE HVOF CARFLON ® SLIDCOAT ® Revêtement de haute technologie composite CARBURE DE TUNGSTENE/PTFE. Le carbure de tungstène est projeté à vitesse supersonique (Mach 6) à l’aide d’un appareil HVOF qui produit une couche très dure, dense et liée au substrat. La pièce est par la suite imprégnée par un procédé TEFLON afin de parachever une surface très douce, glissante et non adhérente. Ce système de projection confère une dureté et adhérence inégalée High technology composite TUNGSTEN CARBIDE/PTFE. The tungsten carbide powder is deposited by a high velocity supersonic gun (Mach 6) which produces a hard, dense and well bonded layer. The treated is subsequently impregnated with the latest state-of-the-art TEFLON process to achieve a hard wearing smooth, sliding and non-stick surface. This coating system offers an incredible resistance to wear and adhesion Machoire Machoires de scellage Machoires de scellage AVANTAGES • Exceptionnelle résistance à l’usure par frottement • Bonne résistance à la corrosion et à l’abrasion • Anti-adhérent et glissant BENEFITS • High wear friction resistance • Good resistance to corrosion and abrasion • Non-stick and sliding Métallisation Nord Industrie – rue d’Arcole 51 bis – 59000 Lille – Tel: +33 3 28 38 05 50 – Fax: +33 3 20 30 98 72 E-mail: [email protected] – website: www.mni-hi-tech.com MULTI LAYERS COATING BASED ON PTFE HVOF PROCESS CARFLON ® Caractéristiques Dureté: 1700 HV Rugosité: 1.5 µm – 3 µm Ra T°: 260° (continue) T° maxi: 280° (pointe) Coef. de frottement: Cinétique: 0.12 Dynamique: 0.10 Bonne résistance aux chocs Excellence résistance au fretting Bonne résistance à la plupart des acides et solvants SLIDCOAT ® Characteristics Hardness: 1700 HV Roughness: 1.5 µm – 3 µm Ra T°: 260° (working) Maxi T°: 280° Friction coefficient Static: 0.12 Dynamic: 0.10 Good resistance to mechanical shocks Excellent resistance to hopping Good resistance to most acids and solvents Pièce de conditionnement Rouleaux pour découpe de tapis Prothèses Pour reins Ecluse Moule pour abats-jour Métallisation Nord Industrie – rue d’Arcole 51 bis – 59000 Lille – Tel: +33 3 28 38 05 50 – Fax: +33 3 20 30 98 72 E-mail: [email protected] – website: www.mni-hi-tech.com