AXOSPLICE ANG.qxd

Splicing systems
AXOSPLICE®
SMD component tapes
Splicing systems
The AXOPLICE® range of SMD component tapes splicing systems
allows a quick and safe change of reels on SMT assembly equipment without any machine stop.
Tapes are joined with brass clips and cover tapes are linked precut adhesives available in different widths.
LOUPOT SAS - 103,
AVENUE DE TY-BOS - 29556 QUIMPER CEDEX 09 - FRANCE
TEL. : +33 2 98 65 66 67 - FAX : +33 2 98 90 19 17 - VISIOCONF. +33 2 98 64 41 31
e-mail : [email protected] - http://www.loupot.com - Released April 2003
Splicing
systems help
— To decrease time of changing reels.
— To avoid production stops (opening and
frequency) to gain productivity :
. When the feeder is empty,
. When zero point of each feeder is different,
. If the spare feeder prepared in blind time is
badly indexed or not in the good step.
— Suppression of the replacing feeder enables :
. To decrease maintenance costs.
. To decrease investments (less feeder stock).
Système adaptable sur toutes machines équipées
de feeders de raccordement
— To suppress the loss of components in tape
outset.
Technical
Characteristics
Sertissage
— Largeur de bande réglable : de 8 à 72 mm
(norme CEI286 et EIA481).
— Pas : réglable de 2 à 72 mm par pas de 4.
— Diamètre bobine : de 180 à 380 mm.
— Ergonomie : pince, socle ou table.
— Agrafes disponibles chez LOUPOT.
— Dimensions : 850 mm x 500 mm x 810 mm.
— Weight : 90 kg.
— Security : conform to CE standards.
— Option : sticky labels winder.
Pose d’un adhésif sur le cover tape
Pre cut adhesives tapes widths of
4,9 mm, 8 mm and 12 mm, 16 mm,
24 mm or 36 mm
LOUPOT SAS - 103, AVENUE DE TY-BOS - 29556 QUIMPER CEDEX 09 - FRANCE
TEL. : +33 2 98 65 66 67 - FAX : +33 2 98 90 19 17 - VISIOCONF. +33 2 98 64 41 31
e-mail : [email protected] - http://www.loupot.com - Released April 2003