nissan x-trail 2007 : pp1/207/ix
Transcription
nissan x-trail 2007 : pp1/207/ix
NISSAN X-TRAIL 2007 Item Code Codice Articolo : PP1/207/IX Réference Article GB ITA STAINLESS STEEL REAR PROTECTION PROTEZIONE POSTERIORE IN ACCIAIO INOX FR PROTECTION POSTERIEURE EN ACCIER INOX NISSAN X-TRAIL 2007 Part List Lista della bulloneria Liste des piéces A TE 8X25 x 6 B Ø 8 x 6 C Ø 8 x 6 D M8 x 6 E PP1/207/C x 1 GB ITA FITTING INSTRUCTIONS 1. Remove the n.2 bolts present in the lower part of the bumper on the right side (picture 1). 2. Fit the E bracket using A,B,C (picture 2). 3. Fit the bigger welded bracket on E using A,B,C,D. 4. In order to fit the central brackets it is necessary to remove the plastic rivets and substitute them with A,B,C,D 5. Tighten all the set of bolts. 1. Rimuovere i 2 bulloni presenti nella parte inferiore del paraurti lato destro foto 1. 2. Fissare la staffa E utilizzando A,B,C foto 2. 3. Fissare la staffa saldata più grande su E utilizzando A,B,C,D. 4. Per fissare le staffe centrali rimuovere i rivetti in plastica e sostituirli con A,B,C,D. 5. Serrare tutta la bulloneria. 1 Date Data Date 14/09/07 Item Code Cod.Articolo Réf. Article PP1/207/IX Checked and approved by Controllato ed approvato da Controlé et approuvé par FR ISTRUZIONI DI MONTAGGIO 2 Vehicle model Modello Veicolo Modèle de Voiture NISSAN X-TAIL Claudio Gallo INSTRUCTIONS DE MONTAGE 1. Enlever les 2 boulons qui se trouvent dans la partie inférieure du parechoc côté doroite (photo 1). 2. Fixer l’étrier E en utilisant A,B,C (photo 2). 3. Fixer l’étrier saudé plus grand sûr E en utilisant A,B,C,D. 4. Pour fixer les étriers centrales enlever les rivets en plastique et les substituer avec A,B,C,D. 5. Serrer toute la boulonnerie. 3