Rollscan EN.indd

N O N
D E S T R U C T I V E
U L T R A S O N I C
T E S T I N G
ROLLSCAN
ENCODED MANUAL SOLUTION
Dry contact phased array manual control by UT.
Metalscan
Be on the right wavelength
w w w . m e t a l s c a n . f r
N O N
D E S T R U C T I V E
U L T R A S O N I C
T E S T I N G
ROLLSCAN
Manual solution
Dry contact control (humidification of the membrane)
B-scan and C-scan mapping (encoding wheel)
Evolutive components
Ergonomic design, small and handy
Size and bulk changeable depending on the specifications required
Phased array technology
Inspection field
Flat and curved surface inspection
- thickness measuring
- flaw detection
Controlled materials : composite, polymer…
Membrane and wheel characteristics
Custom-built polymer (water acoustic impedance : tend to minimize interface echoes)
Flexible to fit the shape of the item to control
Lateral area of control optimized thanks to the design of the wheel
Probes and settings
Equiped with a 64 element probe (5 MHz standard, other probes available on demand)
(number of elements, bulk)
The water column is adjustable (from 15 to 25 mm)
The orientation of the probe is adjustable (squint angle : +/- 12°)
Settings are adjustable without removing the wheel
Contact us for further information.
Metalscan
w w w . m e t a l s c a n . f r
Metalscan, Rue Désiré Gilot, BP 50383 Saint Rémy - 71109 CHALON SUR SAONE CEDEX France
Phone : +33 (0)3 85 90 07 50 - Fax +33 (0)3 85 90 07 51 - email : [email protected]