Microcompact analogue/analogue converter
Transcription
Microcompact analogue/analogue converter
Datasheet Microcompact analogue/analogue converter, passive UK D F Technical data sheet · Interface Technology Microcompact analogue/analogue converter, passive Subject to technical modification 7948577 Identification Type Part-No. WPAA 7-0527 7948577 Input Input signal Galvanic isolation I/O Zero /Span Input overload capability 2 x 0(4)–20 mA 2-way isolation Production comparison max. 35 mA Load Side Output signal Max. load impedance at I-output Output current Ripple 0(4)–20 mA 1000 Ω (RB) max. 21 mA <5 mVeff (working resistance 100 Ω) General Max. leakage voltage Nominal voltage Status Indication Input/output protection Accuracy Burden error Temperature drift /K 2.8 V passive No Suppressor diode (33 V) 0.1 % FSR (23 °C) <0.06 % from measured value / 100 Ω working resistance <150 ppm / K FSR 22.01.2014 – Subject to technical modification Part-No. 7948577 RS Components Limited www.rs-components.com Technical data sheet · Interface Technology Temperature drift (working resistance >600R) Temperature drift (working resistance >600R) Insulation voltage input/output Housing material Field installation Protection class Installation postition Termination Operation temperature range Storage temperature range Dimensions (w × h × d) Weight (kg/piece) Approvals <100 ppm / K FSR <150 ppm / K FSR 1.5 kVeff PA 6.6 (UL 94 V-0) rail TS 35 (EN 60715) IP 20 Optional Screw terminal: 0.14–1.5 mm2 -25 °C – 60 °C -40 °C – 85 °C 6.2 × 90.0 × 115.5 mm 0.055 kg/piece cULus, Class I, Div. 2, Groups A, B, C, D T4A Dimensions PIN assignment 22.01.2014 – Subject to technical modification Part-No. 7948577 RS Components Limited www.rs-components.com Technical data sheet · Interface Technology Action chart Comments With connection: This passive isolator has a non-reactive transmission, so that the current in the input circuit is not interrupted for an output interruption. 22.01.2014 – Subject to technical modification Part-No. 7948577 RS Components Limited www.rs-components.com Technisches Datenblatt · Interfacetechnik Microcompact Analog/Analog Wandler Passiv Technische Änderungen vorbehalten 7948577 Identifikation Typ Art.-Nr. Eingangsseite Eingangssignal galv. Trennung E/A Zero /Span Überlastbarkeit Eingänge 2 x 0(4)–20 mA 2-Wege Trennung Produktionsabgleich max. 35 mA Ausgangsseite Ausgangssignal maximale Bürde bei I - Ausgang Ausgangsstrom Restwelligkeit 0(4)–20 mA 1000 Ω (RB) max. 21 mA <5 mVeff (Bürde 100 Ω) Allgemeine Daten Verlustspannung max. Nennspannung Statusanzeige Ein-/Ausgangsschutz Genauigkeit Bürdenfehler Temperaturdrift/K 2,8 V passiv nein Suppressordiode (33 V) 0,1 % FSR (23 °C) <0,06 % vom Meßwert / 100 Ω Bürde <150 ppm / K FSR 22.01.2014 – Technische Änderungen vorbehalten Art.-Nr. 7948577 RS Components Limited www.rs-components.com WPAA 7-0527 7948577 Technisches Datenblatt · Temperaturdrift (Bürde <600R) Temperaturdrift (Bürde ≥600R) Isolationsspannung Ein-/Ausgang Gehäusematerial Montage Schutzart Einbaulage/Einbauart Anschlussart Arbeitstemperaturbereich Lagertemperaturbereich Maße (B×H×T) Gewicht (kg/Stk.) Zulassungen Interfacetechnik <100 ppm / K FSR <150 ppm / K FSR 1,5 kVeff PA 6.6 (UL 94 V-0) aufrastbar auf TS 35 (EN 60715) IP 20 beliebig Schraubanschluss: 0,14–1,5 mm2 -25 °C – 60 °C -40 °C – 85 °C 6,2 × 90,0 × 115,5 mm 0,055 kg/Stück cULus, Class I, Div. 2, Groups A, B, C, D T4A Maßzeichnung Anschlussbild 22.01.2014 – Technische Änderungen vorbehalten Art.-Nr. 7948577 RS Components Limited www.rs-components.com Technisches Datenblatt · Interfacetechnik Funktionsdiagramm Bemerkungen Mit Zusatzschaltung: Diese Passivtrenner besitzen eine rückwirkungsfreie Übertragung, so dass bei einer Ausgangsunterbrechung der Strom im Eingangskreis nicht unterbrochen wird. 22.01.2014 – Technische Änderungen vorbehalten Art.-Nr. 7948577 RS Components Limited www.rs-components.com Fiche technique · Interface Convertisseur passif microcompact analogique / Analogique Caractéristiques techniques indicatives sous réserve de modifications 7948577 Identification Type Référence WPAA 7-0527 7948577 Entrée Signal d’entrée Séparation galvanique E/S Zéro Capacité de surcharge des entrées 2 x 0(4)–20 mA séparation 2 voies Calibrage en production 35 mA maxi Côté de charge Signal de sortie Charge maximale pour sortie I Courant de sortie Ondulation résiduelle 0(4)–20 mA 1000 Ω (RB) 21 mA maxi <5 mVeff (charge 100 Ω) Données générales Tension de perte maxi Gamme de tensions Visualisation d´état Protection entrée/sortie Précision Erreur de charge Dérive de température/K Dérive de température (charge <600R) Dérive de température (charge ≥600R) 2,8 V passif non Diode transil (33 V) 0,1 % FSR (23 °C) <0,06 % de la valeur de mesure / charge 100 Ω <150 ppm / K FSR <100 ppm / K FSR <150 ppm / K FSR 22.01.2014 – Caractéristiques techniques indicatives sous réserve de modifications Référence 7948577 RS Components Limited www.rs-components.com Fiche technique · Interface Tension d'isolement entrée / sortie Matière du boîtier Montage Degré de protection Position/type de montage Raccordement Plage de température de travail Plage de température de stockage Dimensions (l×h×p) Poids (kg/pièce) Homologations 1,5 kVeff PA 6.6 (UL 94 V-0) clipsable sur TS 35 (EN 60715) IP 20 au choix Bornes à vis : 0,14–1,5 mm2 -25 °C – 60 °C -40 °C – 85 °C 6,2 × 90,0 × 115,5 mm 0,055 kg/pièce cULus, Classe I, Div. 2, Groupes A, B, C, D T4A Plan d'encombrement Schéma de connexion 22.01.2014 – Caractéristiques techniques indicatives sous réserve de modifications Référence 7948577 RS Components Limited www.rs-components.com Fiche technique · Interface Diagramme fonctionnel Remarques Avec commutation supplémentaire : Ces séparateurs passifs possèdent une transmission sans rétroaction de telle sorte qu’en cas d’interruption de sortie le courant dans le circuit d’entrée n’est pas interrompu. 22.01.2014 – Caractéristiques techniques indicatives sous réserve de modifications Référence 7948577 RS Components Limited www.rs-components.com