SERIE GRES D`ANTALYA VOCI DI CAPITOLATO
Transcription
SERIE GRES D`ANTALYA VOCI DI CAPITOLATO
SERIE GRES D’ANTALYA VOCI DI CAPITOLATO 1 Piastrelle di ceramica in gres porcellanato, smaltato (Gruppo BIa-GL), compatte ed inassorbenti, esteticamente simili a pietre naturali, idonee per esterni, ambienti pubblici, commerciali, di pregio, interni, sottoposti ad alto traffico pedonale 2 Realizzate mediante pressatura a secco di impasti pregiati, colorati, atomizzati, di opportune granulometrie, sottoposti a cottura industriale prolungata a temperature superiori a 1200°C 3 Spessore (mm): 14 4 Superficie: GL smaltata, decorata a tecnologia digitale e con proprietà antibatteriche Microban® 5 Finitura dei Lati: Rettificata e leggermente Bisellata 6 Prima Scelta: conforme alle norme di settore europea EN 14411-G ed internazionale ISO 13006-G. Prodotte in stabilimenti certificati con Sistema di Gestione Qualità ISO 9001 7 Prodotte con la massima attenzione verso l’ambiente in stabilimenti certificati con Sistema di Gestione Ambientale ISO 14001 ed EMAS 8 Piastrelle con elevate caratteristiche tecniche che le rendono particolarmente idonee per le destinazioni d’uso indicate Valori medi di produzione Caratteristiche Tecniche - Norme di Riferimento GRES D’ANTALYA Assorbimento d’acqua - UNI EN ISO 10545.3 ≤0,05 Resistenza alla flessione - UNI EN ISO 10545.4 Conforme Sforzo di rottura (s) - UNI EN ISO 10545.4 620 kg Sforzo di rottura (s) - ASTM C 648 1350 pounds Resistenza all’abrasione - UNI EN ISO 10545-7 PEI 5 Resistenza al gelo - UNI EN ISO 10545.12 Ingelivo Resistenza all’attacco chimico - UNI EN ISO 10545.13 GLA-GHA Resistenza alle macchie - UNI EN ISO 10545.14 5 Resistenza allo scivolamento DIN51130 R9 BCRA TORTUS ≥ 0,40 ASTM C 1028 ≥ 0,60 Wet / Dry GRES D’ANTALYA SERIES SPECIFICATION ITEMS 1 Porcelain stoneware tiles, glazed (BIa-GL group), compact and non-absorbent, aesthetically similar to natural stone, suitable for prestigious exterior, public, commercial environments, as well as interiors, subject to heavy pedestrian traffic 2 Made by dry-pressing fine, coloured and spray dried bodies with the appropriate grain size, subject to prolonged industrial firing at a temperature of over 1200°C 3 Thickness (mm): 14 4 Surface: GL glazed, digitally decorated, with Microban® antibacterial properties 5 Side finish: Rectified and slightly Bevelled 6 First grade: complying with European standard EN 14411-G and international standard ISO 13006-G. Manufactured in facilities with an ISO 9001 Quality Management System 7 Manufactured with the greatest attention towards the environment in facilities certified by the ISO 14001 Environmental Management and EMAS systems 8 Tiles with top quality technical features that make them particularly suitable for the intended uses indicated Average ratings Technical Characteristics - Reference standards GRES D’ANTALYA Water absorption - UNI EN ISO 10545.3 ≤0.05 Resistance to flexure - UNI EN ISO 10545.4 Compliant Breaking stress (s) - UNI EN ISO 10545.4 620 kg Breaking stress (s) - ASTM C 648 1350 pounds Resistance to abrasion - UNI EN ISO 10545-7 PEI 5 Frost-resistance - UNI EN ISO 10545.12 Frost-proof Resistance to chemicals - UNI EN ISO 10545.13 GLA-GHA Resistance to staining - UNI EN ISO 10545.14 5 Slip resistance DIN51130 R9 BCRA TORTUS ≥ 0.40 ASTM C 1028 ≥ 0.60 Wet / Dry SÉRIE GRES D’ANTALYA RUBRIQUES DU CAHIER DES CHARGES 1 Carreaux céramiques en grès cérame, émaillé (Groupe BIa-GL), compacts et non poreux, esthétiquement semblables aux pierres naturelles, indiqués en extérieur comme en intérieur, pour les espaces publics, commerciaux, de luxe soumis à un trafic piétonnier intense. 2 Réalisés par pressage à sec de pâtes de qualité, colorées, atomisées, à granulométries appropriées, soumis à une cuisson industrielle prolongée à des températures supérieures à 1 200 °C. 3 Épaisseur (mm) : 14 4 Surface : GL émaillée, décorée selon la technologie numérique et dotée de propriétés antibactériennes Microban® 5 Finition des Bords : Rectifiée et légèrement Biseautée 6 Premier Choix : conforme aux normes de secteur européenne EN 14411-G et internationale ISO 13006-G. Produits dans des établissements certifiés avec Système de Management de la Qualité ISO 9001. 7 Produits avec le plus grand respect pour l’environnement dans des établissements certifiés avec Système de Management Environnemental ISO 14001 et EMAS. 8 Carreaux aux caractéristiques techniques élevées qui les rendent particulièrement appropriés aux utilisations prévues. Valeurs moyennes de production Caractéristiques Techniques – Normes de Référence GRES D’ANTALYA Absorption d'eau - UNI EN ISO 10545.3 ≤0,05 Résistance à la flexion - UNI EN ISO 10545.4 Conforme Effort de rupture (s) - UNI EN ISO 10545.4 620 kg Effort de rupture (s) - ASTM C 648 1 350 livres Résistance à l’abrasion - UNI EN ISO 10545-7 PEI 5 Résistance au gel - UNI EN ISO 10545.12 Antigélif Résistance à l’attaque chimique - UNI EN ISO 10545.13 GLA-GHA Résistance aux taches - UNI EN ISO 10545.14 5 Résistance au glissement DIN 51130 R9 BCRA TORTUS ≥ 0,40 ASTM C 1028 ≥ 0,60 Wet / Dry SERIE GRES D’ANTALYA SPEZIFIKATIONSBEDINGUNGEN 1 Keramikfliesen aus Feinsteinzeug, glasiert (Gruppe BIa-GL), kompakt und ohne Wasseraufnahme, ästhetischer Aspekt ähnlich dem von Natursteinen, geeignet für Außen- und Innenbereiche, öffentliche Gebäude, Einkaufszentren, Prestigeobjekte, Bereiche mit hoher Begehungsfrequenz. 2 Sie werden durch Trockenpressung hochwertiger sprühgetrockneter, farbiger Massen mit geeigneter Korngrößenverteilung erzeugt und bei einer Mindesttemperatur von 1200 °C einem verlängerten industriellen Brand unterzogen 3 Dicke (mm): 14 4 Oberfläche: GL glasiert, mit Digitaltechnik dekoriert und mit antibakteriellen Eigenschaften Microban® 5 Beschaffenheit der Seiten: Geschliffen und leicht abgeschrägt 6 Erste Wahl: Entspricht den einschlägigen europäischen Vorschriften EN 14411-G und den internationalen Vorschriften ISO 13006-G. Produziert in Werken mit zertifiziertem Qualitätsmanagement-System ISO 9001. 7 Produziert mit besten Umweltschutzmaßnahmen in Werken mit zertifiziertem Umweltmanagement-System ISO 14001 und EMAS. 8 Fliesen mit besten technischen Eigenschaften, die sie für die genannten Verwendungszwecke besonders geeignet machen. Produktionsdurchschnittswerte Technische Eigenschaften - Bezugsnormen GRES D’ANTALYA Wasseraufnahme - UNI EN ISO 10545.3 ≤ 0,05 Biegefestigkeit - UNI EN ISO 10545.4 Konform Bruchfestigkeit (s) - UNI EN ISO 10545.4 620 kg Bruchfestigkeit (s) - ASTM C 648 1350 pounds Abriebfestigkeit - UNI EN ISO 10545-7 PEI 5 Frostbeständigkeit - UNI EN ISO 10545.12 Frostbeständig Chemikalienbeständigkeit - UNI EN ISO 10545.13 GLA-GHA Fleckenbeständigkeit - UNI EN ISO 10545.14 5 Rutschfestigkeit DIN 51130 R9 BCRA TORTUS ≥ 0,40 ASTM C 1028 ≥ 0,60 Wet / Dry SERIE GRES D’ANTALYA ESPECIFICACIONES TÉCNICAS 1 Baldosas de cerámica en gres porcelánico esmaltado (Grupo BIa-GL), compactas, no absorbentes, estéticamente similares a piedras naturales, adecuadas para ambientes públicos, comerciales, preciados, interiores y exteriores, sujetos a alto tránsito peatonal. 2 Realizadas mediante prensado en seco de amasijos preciados, coloreados, atomizados, de adecuada granulometría, sujetos a cocción industrial prolongada a temperaturas superiores a 1200 °C 3 Espesor (mm): 14 4 Superficie: GL esmaltada, decorada por tecnología digital y con propiedades antibacterianas Microban® 5 Acabado de los lados: Rectificado y levemente Biselado 6 Primera selección: conformes a las normas de sector europea EN 14411-G e internacional ISO 13006-G. Producidas en fábricas certificadas con Sistema de Gestión de Calidad ISO 9001 7 Producidas con la máxima atención al medio ambiente en fábricas certificadas con Sistema de Gestión Ambiental ISO 14001 y EMAS 8 Baldosas con elevadas características técnicas que las hacen particularmente adecuadas para los destinos de uso indicados Valores medios de producción Características técnicas - Normas de referencia GRES D’ANTALYA Absorción de agua - UNI EN ISO 10545.3 ≤ 0,05 Resistencia a la flexión - UNI EN ISO 10545.4 Conforme Esfuerzo de rotura (s) - UNI EN ISO 10545.4 620 kg Esfuerzo de rotura (s) - ASTM C 648 1350 libras Resistencia a la abrasión - UNI EN ISO 10545-7 PEI 5 Resistencia a las heladas - UNI EN ISO 10545.12 Resistente a las heladas Resistencia a la agresión química - UNI EN ISO 10545.13 GLA-GHA Resistencia a las manchas - UNI EN ISO 10545.14 5 Resistencia al resbalamiento DIN 51130 R9 BCRA TORTUS ≥ 0,40 ASTM C 1028 ≥ 0,60 Wet / Dry