pH/ORp Transmitter(English, German and French Language)
Transcription
pH/ORp Transmitter(English, German and French Language)
OMEGA PHTX-8710 pH/ORP Transmitter - pH Instructions OMEGA PHTX-8710 pH/Redox Transmitter - pH Bedienungsanleitung OMEGA PHTX-8710 pH/ORP Transmetteur - pH Instructions CAUTION! Remove power to unit before wiring input and output connections. ACHTUNG! Verdrahtung in spannungslosem Zustand ausführen. ATTENTION! Débrancher d'alimentation avant d'effectuer les connexions. 1 Loop Power Connections 1 Elektrischer Anschluss 1 Connexions d'alimentation de la boucle 4 mA 20 10 to 30 VDC 4 mA 20 - 4 + + + 4 to 20 mA - + + 4 to 20 mA - - 10 to 30 VDC 1 5 VDC 15 to 30 VDC Loop Loop - - 10 bis 30 VDC 4 1 250 Ω + 1 to 5 VDC - Loop mA 4 + + + 4 bis 20 mA - + 20 + 4 bis 20 mA - - Loop Loop - 5 VDC + 250 Ω + 1 bis 5 VDC - - Preamp: OMEGA PH-2720-PA Loop mV Preamp Temp. • Use Belden 9536 or equivalent for cable extensions up to 400 ft/120 m • Shield must be maintained through cable splice Sensors: PHE-3271 PHE-2716 4 mV Input Iso. Gnd VV+ T+ T- Braun mA 20 Blau Schwarz 5 VDC 15 à 30 VDC mV Preamp Rot Grün Temp. Weiß • Zur Kabelverlängerung (max. 120 m) abgeschirmtes Kabel benützen • Abschirmung durch Kabelverschraubung fortführen - + + + dé 4 à 20 mA - + dé 4 à 20 mA - + - Loop Loop - + + 250 Ω + dé 1 à 5 VDC - - Loop 2 Connexion d'un Capteur et d'un préamp. Vorverstärker: OMEGA PH-2720-PA Silber (Erdungspunkt) 20 10 à 30 VDC 1 + 15 bis 30 VDC mA 10 à 30 VDC 2 Sensor/Vorverstärker - Anschluss 2 Compatible Sensor/Preamp Wiring Silver (earth ground) Brown mV Input Blue mV Iso. Gnd Black VPreamp Red V+ Green T+ Temp. White T- - 20 10 bis 30 VDC + + mA Sensoren: PHE-3271 PHE-2716 mV Input Iso. Gnd VV+ T+ T- Argent (Terre) Marron Bleu Préamp: OMEGA PH-2720-PA Noir Rouge Vert Blanc • Employer Belden n 9536 ou équivalent pour la rallonge jusqu' à un maximum de 120 m. • Blindage doit être entretenu autour de raccordement électrique. Capteurs: PHE-3271 PHE-2716 3 Installation Options 3 Montagemöglichkeiten 3 Options d'installation 3.1 Standard Panel Mount • Panel cutout template/instructions (included). 3.1 Schalttafel - Montage • Mittels Schablone den Transmitter on die Schalttafel montieren 3.1 Insertion Dans un Panneau Standard • Les instructions pour la coupe du pannaeu sont incluses, de même qu'un gabarit. 3.2 Optional PHTX-8710-MK Universal Mounting Kit • See section 9 for ordering options. 3.2 Universal-Montage mit PHTX-8710-MK Universal Montage-Set • Abschirmung durch Kabelverschraubung fortführen 3.2 Ensemble de Montage Universel PHTX-8710-MK Facultatif • La section 9 explique les options d'achat. Conduit Port Options NPT Ports DIN Ports Blind holes for DIN conduit connectors (8) PG13.5 threaded conduit ports (2) 1/2 in. NPT threaded conduit ports (2) Kabeldurchführung NPT DIN/PG Sacklöcher für DIN Leitungstecker (8) Kabeldurchführung mit PG13.5 Gewinde (2) Kabeldurchführung mit 1/2 in. NPT Gewinde (2) Options Relatives aux Conduites NPT DIN Trous pour le raccordement des conduites DIN (8) Orifices de raccordement à filetage métrique PG13.5 (2) Orifices de raccordement d'un demi-pouce à filetage NPT (2) 4 FUNCTIONS 4 FONCTIONS 4 FUNKTIONEN Press & hold for access: Appuyer sur les boutons de façon continue Drücken & Halten für Zugang: VIEW ANZEIGEN 2s VISUALISATION 5s 2s CALIBRATE 5s OPTIONS OPTIONS 5 ANZEIGEN To change: To choose: 5 VISUALISATION 1 3 2 To save: 3 2 Ändern: Wählen: Speichern: 1 Pour choisir: pH pH pH Raw mV mV Signal Tension brute Temperature Temperatur Temperature Output Ausgang Sortie Last Cal. Letzte Kalibration Calendrier Press and release to access EASY CAL Buffer cal. Drücken & Freigeben für Zugang EASY CAL Puffer Kal. 6 EASY CAL Cal. du tampon 2 3 Pour changer: Pour enregistrer: Appuyer et relâcher pour passer à EASY CAL 6 EASY CAL 6 EASY CAL (ANPASSUNG) • Requires 2 pH buffers. Use pH 4.0, 7.0, 10.0 buffers only. • Benötigt 2 pH-Pufferlösungen. Veswenden Sie pH 4.0, pH 7.0, pH 10.0 Püfferlösungen. Press keys in sequence continue: Drücken der Tasten fortzufahren: to 5s CALIBRAGE OPTIONEN 5 VIEW 1 2s KALIBRATION • Nécessite deux tampons. N'utiliser que des solutions tampon de pH 4.0, 7.0 ou 10.0 um Util.la séque. de touches continuer: pour 1 2 3 1 2 3 1 2 3 To calibrate: Response: To accept: Kalibration: Antwort: Bestätigung: Calibrage: Réponse: Confirmation: Press for 1 second to accept buffer calibration Setzen Sie die Sensorspitze in die erste pH Pufferlösung pH 4.00, pH 7.00, oder pH 10.00 Press for 1 second to accept buffer calibration Setzen Sie die Sensorspitze in die zweite (andere) pH Pufferlösung pH 4.00, pH 7.00, oder pH 10.00 Place sensor tip in first pH buffer; pH 4.00, pH 7.00, or pH 10.00 Place sensor tip in second (different) pH buffer: pH 4.00, pH 7.00, or pH 10.00 Display alternates every 2 seconds. Allow for stabilization. Display alternates every 2 seconds. Allow for stabilization. To exit EASY CAL at any time without saving and return to VIEW: Display returns to VIEW quick press Anzeige wechselt alle 2 Sekunden. Warten Sie bis sich dié Anzeigé stabilisiert hat Drücken Sie für 1 Sekunde um die Kalibrierung zu bestätigen. Drücken Sie für 1 Sekunde um die Kalibrierung zu bestätigen. Anzeige wechselt alle 2 Sekunden. Warten Sie bis sich dié Anzeigé stabilisiert hat Anzeige kehrt zu ANZEIGEN zurück Zum Verlassen von EASY CAL ohne Speichern der Kalibration und Zurückkehren zu ANZEIGEN: kurz drücken Tremper la pointe du senseur dans la premiére solution L'affichage change tampon: toutes les deux secondes. Le laisser pH 4.0 se stabiliser. pH 7.0 ou pH 10.0 Tremper la pointe du senseur dans la deuxiéme solution tampon (différente): Appuyer sur pendant une sec pour confirmer le calibrage de la solution tampon. Appuyer sur pendant une sec pour confirmer le calibrage de la solution tampon. L'affichage change toutes les deux secondes. Le laisser L'affichage revient se stabiliser. dans le mode de visualisation (VIEW) Pour quitter EASY CAL à tout moment et Bref revenir au mode de visualisation (Vue) appui sans enregistrer le nouveau calibrage: pH 4.0 pH 7.0 ou pH 10.0 pH instructions continued... pH-Instruktionen Fortsetzung... pH instructions à suivre... 7 CALIBRATE 7 KALIBRATION 7 CALIBRAGE • Standard and Slope requires 2 buffer values • Benötigt zwei Pufferwerte • Stand. et Slope nécess. deux tampon pH différents. Press keys in sequence continue: 1 1 3 2 To change: To choose: Drücken der Tasten fortzufahren: to To save: um 3 2 Ändern: Wählen: Util. la séqu. de touches continuer: 1 Speichern: Pour choisir: pour 2 3 Pour changer: Pour enregister: Kontrast Standard Display alternates, allow for stabilization. Anzeige wechselt. Warten Sie, bis sich die Anzeige stabilisiert hat Drücken & Halten Press & hold Bereich Display alternates, allow for stabilization. L'affichage change, Le laisser se stabiliser. 2s Anzeige wechselt. Warten Sie, bis sich die Anzeige stabilisiert hat Appuyer & tenir L'affichage change, Le laisser se stabiliser. 2s 2s Letitie Kalibration To return to VIEW: Zurückkehren zu ANZEIGEN To restore original value: quick press kurz Drücken quick press 8 OPTIONS Pour retourner au mode de vis. Pour revenir à la valeur initiale: (Vue) Bref Bref appui appui Alten Wert wiederherstellen: kurz Drücken 8 OPTIONS 8 OPTIONEN Press keys in sequence continue: Drücken der Tasten fortzufahren: to um Util. la séqu. de touches continuer: pour 1 2 3 1 2 3 1 2 3 To choose: To change: To save: Wählen: Ändern: Speichern: Pour choisir: Pour changer: Pour enregister: Press & hold Drücken & Halten Appuyer & tenir 2s 2s 2s To return to VIEW: To restore original value: quick press quick press Alten Wert wiederherstellen: kurz Drücken kurz Drücken 9 Accessories PHTX-8710-MK PHTX-8710-MK-D 10 Specifications Universal Montage-Set (NPT) Universal Montage-Set (DIN) PHTX-8710-MK PHTX-8710-MK-D Allgemeine Daten pH Bereich: Gehäuseschutzart: Gehäusematerial: Gehäusedichtung: Gehäuseschrauben: Pour revenir à la valeur initiale: Bref appui Ensemble de montage universel (NPT) PHTX-8710-MK Ensemble de montage universel (DIN) PHTX-8710-MK-D 10 Spécifications 10 Technische Daten 0 to 14 NEMA 4X/IP65 glass-filled polypropylene silicone rubber (captive) 8-32, self-tapping black oxide (captive) Pour retourner au mode de visualis. (VIEW) Bref appui 9 Accessoires 9 Zubehör Universal mounting kit (NPT ports) Universal mounting kit (DIN ports) General Data pH range: Enclosure rating: Enclosure material: Enclosure gasket: Enclosure screws: Zurückkehren zu ANZEIGEN 0 bis 14 NEMA 4X/IP65 PP glasfaserverstärkt Siliziumgummi 8-32, Blechschrauben, schwarz oxid. Caracteristiques pH rangée: 0 à 14 Classification du boîtier: NEMA 4X/IP65 Composition du boîtier: polypropyléne Joints d'étanch.du boîtier: silicone-caoutchouc (captif) Vis du boîtier: 8-32, self-tapping noir oxyde (captif) Display type: 8-digit alphanumeric dot matrix variable pH, 0 to 14 raw mV, ±515 mV loop current, 3.90 to 21.00 mA temperature -10 to 120 °C ±0.03 pH ±0.016 mA Automatic for pH 4.0, 7.0, and 10.0 using EASY CAL Anzeige: 8-stellig, alphanumerische Punktmatrix-Anzeige Anzeigekontrast: einstellbar Anzeigebereich: pH, 0 bis 14 mV Signal, ±515 mV Stromschleife, 3.90 bis 21.00 mA Temperatur -10 bis 120 °C Genauigkeit der Anzeige : ±0.03 pH Genauigkeit der Stromschleife : ±0.016 mA Puffererkennung: automatisch für pH 4.0, 7.0 und 10.0 mit "EASY CAL" Elektrische Daten Speisespannung: 10 bis 30 VDC Stromschleifenimpedanz: 50 Ω max. @ 10 VDC 100 Ω max. @ 12 VDC 1000 Ω max. @ 30 VDC Eingangsisolation: 500 VDC, galvanisch getrennt Ausgangsstrom: 4 bis 20 mA (einstellbar) Kompatibler Vorverstärk.: nur PH-2720-PA zusamm. mit PHE 3721/PHE 2716 pH-Sensoren verwenden Vorverstärk. Speisung: ±5 bis 7.5 VDC @ 50 µA max. (von PHTX-8710) Eingangssignal: -999 bis 1999 mV maximum (von Vorverstärker) Thermistor signal: 3 KΩ Balco, 2600 bis 4200 Ω , -10 bis 120 °C alphanumérique matriciel à 8 caractéres Contraste de l'affichage: réglable Gammes d'affichage: pH, 0 à 14 cru mV, ±515 mV courant de boucle, 3.90 á 21.00 mA Température -10 à 120 °C Exactitude de l'affichage: ±0.03 pH Exactitude de la boule: ±0.016 mA Reconnaissance de la solution tampon: Automatique pour pH de 4.0, 7.0 et 10.0 à l'aide EASY CAL Caractéristiques électriques Tension de la boucle: 10 à 30 VDC Impédance de la boucle: 50 Ω max. @ 10 VDC 100 Ω max. @ 12 VDC 1000 Ω max. @ 30 VDC Isolation de l'entrée: 500 VDC iso. galvanique Courrant de sortie: 4 à 20 mA (réglable) Préamp compatible: PH-2720-PA seulement, avec PHE 3721/PHE 2716 pH sensor Alimentation du préamp: ±5 à 7.5 VDC @ 50 µA max. (fournie par le PHTX-8710) Signal d'entrée: -999 à 1999 mV maximum en provenance du préamp Signal de thermistor: 3 KΩ Balco, 2600 à 4200 Ω , -10 à 120 °C Ambient Conditions Operating temperature: -15 to 70 °C/5 to 158 °F Storage temperature: -15 to 80 °C/5 to 176 °F Umgebungsbedingungen Temperaturbereich: -15 bis 70 °C Lagertemperatur: -15 bis 80 °C Environnement Température de service: -15 à 70 °C Temp. de Stockage: -15 à 80 °C Dimensions: Abmessungen: Dimensions: Display contrast: Display ranges: Display accuracy: Loop accuracy: Buffer recognition: Electrical Data Loop power: Loop impedance: Input isolation: Current output: Compatible preamp: Preamp power: Input signal: Thermistor signal: 10 to 30 VDC 50 Ω max. @ 10 VDC 100 Ω max. @ 12 VDC 1000 Ω max. @ 30 VDC 500 VDC galvanic isolation 4 to 20 mA (adjustable) PH-2720-PA only, for use with PHE 3721/PHE 2716 pH sensors ±5 to 7.5 VDC @ 50 µA max. (from PHTX-8710) -999 to 1999 mV maximum from preamp 3 KΩ Balco, 2600 to 4200 Ω from -10 to 120 °C PHTX-8710 (Top View) PHTX-8710 (Draufsicht) 4.2 in./ 107 mm PHTX-8710 (Vue de dessus) 107 mm 107 mm pH/ORP Transmitter pH/ORP Transmitter pH/ORP Transmitter 107 mm 107 mm 4.2 in./ 107 mm Type d'affichage: 1.2 in./ 30 mm (side view) 30 mm (Seitenansicht) 1.25 in./ 32 mm 30 mm (Vue de coté) 32 mm 32 mm