ART 732-A
Transcription
ART 732-A
ART 732-A ACTIVE TWO-WAY SPEAKER DESCRIPTION The ART 732-A with 12” woofer guarantees linear response and precise lowfrequency control. The ND 840 large-format titanium-dome compression driver is responsible for one of the key advantages of this product: the 3.0” voice coil enables a crossover point of 900 Hz, allowing the driver to produce almost all of the vocal range with unique vocal clarity and sound projection. The large sized horn is designed to offer constant 60°x90° directivity. Midhigh frequencies are transparent and free from distortion. ART systems are driven from high power class D amplifiers. The amplifier delivers 1400 Watt and is controlled by a DSP that takes care of crossover, equalization, phase alignment, soft limiting and speaker protections. The amplifier presents both XLR/Jack (Combo) balanced inputs, XLR output link, volume and a switchable EQ Mode (Flat/Boost). The amplifier features a solid mechanical aluminum structure, for additional stability and heat dissipation. ART cabinets are moulded on a polypropylene composite material that dampens down vibrations even at high volume. MAIN APPLICATIONS • • • • • • Live sound Portable PA DJs Club systems Small theatres Voice reinforcement ART 732-A is equipped with ergonomically designed handles with rubber handgrips, and can be used in standard configuration or in stage monitor mode. The ART 7 Series is the winner of the Red Dot Design Award. MAIN FEATURES • • • • • • 1400 Watt Digital Amplifier 131 dB max SPL 12“ high power woofer, bass reflex housing 3.0” voice coil, titanium, compression driver 60 x 90, wide dispersion, constant directivity horn DSP Processing ACOUSTICAL SPECIFICATIONS Frequency response: 50 Hz - 20 Khz Max SPL: 131 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression driver: 1.4” neo, 3” voice coil Woofer: 12” neo, 2.5” voice coil INPUT SECTION Input signal (Impedance): Input/Output connector: Input sensitivity: bal/unbal combo XLR, Jack -2dBu / +4 dBu PROCESSOR SECTION Crossover frequencies: Protections: Limiter: High pass: Controls: 900 Hz thermal, RMS soft limiter Volume, EQ shape AMPLIFIER Power supply: High frequencies: Low frequencies: Cooling: Connection: 1400 Watt 400 Watt Peak 1000 Watt Peak convenction VDE PHYSICAL Height: Width: Depth: Weight: Cabinet: Hardware: Handles: Pole mount cap Colour: 708 mm (27.87”) 437 mm (17.20”) 389 mm (15.31”) 20.8 kg (45.86 lbs) Composite PP pole mount 1 on top, 2 on side yes Black ART 732-A Response -20dBu/2m 120 Beamwidth vs. Frequency 360 300 270 90 Coverage Angle (Deg.) dB SPL 100 80 70 Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave) 330 110 20 100 ART732-A 1000 Frequency (Hz) 10000 240 210 180 150 120 90 60 30 0 100 Directivity Index and Q 1000 Frequency (Hz) 10000 Normalized Horizontal off-axis Response 100 20 5 18 0 16 -5 8 6 -10 -15 -20 4 2 1 100 1000 Frequency (Hz) 10000 0 -25 5 0 0 -5 -5 -10 -15 -30 100 10000 Attenuation in dB -10 -25 1000 Frequency (Hz) Normalized Vertical off-axis Response. Below the box Normalized Vertical off-axis Response. Above the box -20 Horizontal ±10 degrees Horizontal ±20 degrees Horizontal ±30 degrees Horizontal ±40 degrees Horizontal ±50 degrees Horizontal ±60 degrees -30 100 5 Attenuation in dB Total Q 10 Directivity index Di, dB 12 10 Attenuation in dB 14 -15 -20 Vertical +10 degrees Vertical +20 degrees Vertical +30 degrees Vertical +40 degrees Vertical +50 degrees Vertical +60 degrees -25 1000 Frequency (Hz) 10000 -30 100 Vertical -10 degrees Vertical -20 degrees Vertical -30 degrees Vertical -40 degrees Vertical -50 degrees Vertical -60 degrees 1000 Frequency (Hz) 10000 ART 732-A HORIZONTAL 1/3 POLAR PLOT Horizontal 1/3 Octave Polars 315 250 200 0° 330° 30° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 270° 90° 0 150° -6 -12 -18 -24 -30 -36 -42 -48 2500 2000 1600 0 Horizontal 1/3 Octave Polars -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 0 -6 -12 -18 -24 -30 -36 -42 -48 270° 90° 0 0 120° -48 -42 -36 -30 -24 -18 -12 -6 240° 150° 5000 4000 3150 Horizontal 1/3 Octave Polars 30° 60° 300° 270° 90° 0 10000 8000 6300 0° 330° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 120° 90° 0 120° 150° 210° 150° 210° 150° 180° 60° 180° 90° 0 240° 30° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 300° 120° 210° 270° 90° 0 0° 330° 60° 300° 270° 60° 180° 30° 30° 300° 150° 210° 0° 330° -48 -42 -36 -30 -24 -18 -12 -6 1250 1000 800 0° 330° 120° 180° Horizontal 1/3 Octave Polars Horizontal 1/3 Octave Polars 60° 240° 120° 210° 30° 300° 0 240° 630 500 400 0° 330° 60° 300° 270° Horizontal 1/3 Octave Polars 180° 180° VERTICAL 1/3 POLAR PLOT Vertical 1/3 Octave Polars 315 250 200 90° 120° 60° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 180° 0° 0 300° -6 -12 -18 -24 -30 -36 -42 -48 2500 2000 1600 0 Vertical 1/3 Octave Polars -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° 180° 0° 0 0 -6 -12 -18 -24 -30 -36 -42 -48 180° 0 210° 5000 4000 3150 60° 330° Vertical 1/3 Octave Polars -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° 300° 10000 8000 6300 90° 120° 60° 30° 150° 30° -6 -12 -18 -24 -30 -36 -42 -48 0° 0 270° 150° 0° -48 -42 -36 -30 -24 -18 -12 -6 240° 90° 120° 30° 150° 180° 30° 270° 60° 60° 150° 300° 240° 90° 120° -48 -42 -36 -30 -24 -18 -12 -6 1250 1000 800 90° 120° 330° 270° Vertical 1/3 Octave Polars Vertical 1/3 Octave Polars 30° 210° 330° 240° 60° 150° 0 210° 630 500 400 90° 120° 30° 150° 180° Vertical 1/3 Octave Polars 0° 180° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° 0° 1.0-J-M ART 732-A PART NUMBERS 13000467 - 230VOLT 13000468 - 115 VOLT DIMENSIONS (All data are in mm) ACCESSORIES AC PMA Speaker pole mount. AC PRO-PM Steel pole mount accessory for a satellite loudspeaker on a subwoofer. Both ends of the pole mount are fitted with an expanding mandrel system for a tight and vibration-free fit for the base and satellite speakers. AC PRO-FS Steel speaker floor stand with folding base and telescopic rod. Tube diameter 35mm. Load capacity up to 50kg. AC PRO-LF Steel professional adapter sleeve for loudspeaker stands. Integrated expanding mandrel system which provides a tight and firm fit for the speaker. AC S140 Aluminum speaker floor stand with folding base and telescopic rod, Tube diameter 35mm. AC S260 Steel speaker floor stand with folding base and telescopic rod, tube diameter 35mm. AC EB4X Kit including no.4 shouldered 10mm eye bolts. AC PMX Speaker pole mount ART COVER 725 Protection cover AC ART715 H-BR Horizontal bracket RCF products are continually improved. All specifications are therefore subject to change without notice. www.rcf.it