FM Schmidt : list of publications (August, 2011)
Transcription
FM Schmidt : list of publications (August, 2011)
F.M. Schmidt : list of publications (August, 2011) Publications in journals 1) Schmidt FM, Agassant JF, Bellet M, Viscoelastic simulation of PET stretch/blow molding process, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS 64 (1): 19-42 MAY 1996 2) Deschaux-Beaume F, Schmidt FM, Frety N, Failure prediction for ceramic dies in the hot-forging process using FEM simulation, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 75 (1-3): 100-110 MAR 1998 3) Schmidt FM, Agassant JF, Bellet M, Experimental study and numerical simulation of the injection stretch/blow molding process, POLYMER ENGINEERING AND SCIENCE 38 (9): 1399-1412 SEP 1998 4) Berthet Florentin, Devos Pierre, Schmidt Fabrice, Ansart Thierry, « Influence des paramètres du procédé et de constitution sur le comportement sous impact et à la résistance en compression après impact », Revue des Composites et des Matériaux Avancés, 8 (1998) 25-52 5) Schmidt FM, Lafleur P, Berthet F, Numerical simulation of resin transfer molding using linear boundary element method, POLYMER COMPOSITES 20 (6): 725-732 DEC 1999 6) Deschaux-Beaume F, Schmidt F, Frety N, Numerical simulation of failure prediction for ceramic tools: comparison with forging test results, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 93: 502-507 AUG 30 1999 7) Schmidt FM, Rodriguez-Villa A, Agassant F, Analytical models for the inflation of a polymeric tube, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 19 (1): 89104 JAN-FEB 2000 8) Reuge N, Schmidt FM, Le Maoult Y, Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations, POLYMER ENGINEERING AND SCIENCE 41 (3): 522-531 MAR 2001 9) Rachik M, Schmidt F, Reuge N, Elastomer biaxial characterization using bubble inflation technique. II: Numerical investigation of some constitutive models, POLYMER ENGINEERING AND SCIENCE 41 (3): 532-541 MAR 2001 10) Monteix S, Schmidt F, Le Maoult Y, Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 119 (1-3): 90-97 Sp. Iss. SI DEC 20 2001 11) Saint-Martin G, Schmidt F, Devos P, Voids in short fibre-reinforced injectionmoulded parts: density control vs. mass control, POLYMER TESTING 22 (8): 947953 DEC 2003 12) Schmidt FM, Le Maoult Y, Monteix S., Modelling of infrared heating of thermoplastic sheet used in thermoforming process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 143: 225-231 Sp. Iss. SI DEC 20 2003 13) Monteix S., Le Maoult Y., Schmidt F.M., Jean Paul Arcens, “Quantitative infrared thermography applied to blow moulding process : measurement of a heat transfer coefficient”, QIRT Journal, Vol.1, n°2, p.133-150, (2004) 14) Dusserre G, Schmidt F, Dour G, Thermo-mechanical stresses in cast steel dies during glass pressing process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 162: 484-491 Sp. Iss. SI MAY 15 2005 15) Lebaal N, Puissant S, Schmidt FM, Rheological parameters identification using in situ experimental data of a flat die extrusion, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 164: 1524-1529 MAY 15 2005 16) Hmida-Maamar S., Schmidt F., Robert L., Velay V., Mercier D., Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage, Matériaux et Techniques, 94, 1-8, 2006 17) N. Pirc, F. Bugarin, F.M. Schmidt, M. Mongeau, 3D BEM-based cooling-channel shape optimization for injection molding processes, International Journal for Simulation and Multidisciplinary Design Optimization, 2/3, 245-252 (2008) 18) G. Régnier, D. Dray, E. Jourdain, S. Le Roux, F. M. Schmidt, A simplified method to determine the full 3D orientation of an injection moulded fiber-filled polymer, Polymer Engineering and Science, Vol. 48, 11, 2159-2168, 2008 19) N. Pirc, F.M. Schmidt, M. Mongeau, F. Bugarin, F. Chinesta, Optimization of BEMbased Cooling Channels Injection Moulding Using Model Reduction, International Journal of Material Forming. (2008) Vol.1, Suppl 1: 1043-1046 20) M. Bordival, Fabrice Schmidt, Yannick Lemaoult, “Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles”, International Journal of Material Forming. (2008) vol. 1, Suppl 1: 1023-1026 21) GUICHON Maelle, BOHER Christine, HASSOUNE-RHABBOUR Bouchra, SCHMIDT Fabrice, BAZIARD Yves « Identification des contraintes de rupture et de cisaillement à l'interface polymère injecté-moule métallique à l'aide du test couronne », MATERIAUX ET TECHNIQUES, vol.96, n° n°1-2, p.65-78, 2008 22) N. Lebaal, Puissant S, Schmidt FM, Design and optimization of three-dimensional extrusion dies, using constraint optimization algorithm, Finite Elements in Analysis and Design 45 (2009) 333 –340 23) N. Lebaal, F.M. Schmidt, S. Puissant, D. Schlaefli, Design of optimal extrusion die for a range of different materials, Polymer Engineering and Science, Vol.49, 3, 432-440, 2009 24) Bordival M., Y. Le Maoult, F. Schmidt, Optimization of preform temperature distribution for the stretch-blow molding of PET bottles: Infrared heating and blowing modelling, Polymer Engineering & Science, Vol. 49, 4, 783-793, 2009 25) N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta, Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction, International Journal of Material Forming. (2009) vol 2, Suppl 1: 271–274 26) B. Cosson, F. Schmidt, Y. Le Maoult, Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method, International Journal of Material Forming. (2009) vol 2, Suppl 1: 267-270 27) Lebaal N., Schmidt F.M., Puissant S, “Application of a Response Surface Method to the Optimal Design of the Wall Temperature Profiles in Extrusion Die, International Journal of Material Forming, Volume 3, Number 1 , 47-58, 2010 28) Lebaal N., Schmidt F.M., Puissant S, “Optimisation of extrusion flat die design and die wall temperature distribution, using Kriging and response surface method”, International Journal of Materials & Product Technology, Vol. 38, Nos. 2/3, 2010 29) R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc, F. Schmidt, “BEM simulation of 3D updated resin front for LCM processes”, Key Engineering Materials Vol. 446 (2010) pp 131-136 30) M. Bordival, F.M. Schmidt, Y. Le Maoult, B. Cosson, “A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics”, Int. J Mater Form (2010) Vol. 3 Suppl 1:809– 812 31) R. Gantois, A. Cantarel, J.-N. Félices, F. Schmidt, “Numerical simulation of Resin Transfer Molding using BEM and Level Set method”, Int. J Mater Form (2010) Vol. 3 Suppl 1:635– 638 32) S. Nakouzi , J. Pancrace, F.M. Schmidt, Y. Le Maoult, F. Berthet, “Curing simulation of composites coupled with infrared heating”, Int J Mater Form (2010) Vol. 3 Suppl 1:587 – 590 33) Y. Ledru, R. Piquet, F. Schmidt, L. Michel, G. Bernhart, “Modeling of voids behaviour during manufacturing composites laminates”, Composites Science and Technology 70 (2010) 2139–2145 34) F. Chinesta, F.M. Schmidt, N. Pirc, M. Mongeau, “Efficient Mold cooling optimization by using model reduction”, Int. Journal of Material Forming, (2011) 4:73–82 35) B. Cosson, F. Schmidt , Y. Le Maoult, M. Bordival “Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method”, Int. Journal of Material Forming, (2011) 4:1–10 36) S. Nakouzi , J. Pancrace, F.M. Schmidt, Y. Le Maoult, F. Berthet, “Curing simulation of composites coupled with infrared heating”, Advanced Engineering Materials, 2011, vol. 13, issue 7, pp. 604-608 37) R. Gantois, A. Cantarel, G. Dusserre, J.-N. Félices, F. Schmidt, “Mold Filling Simulation Of Resin Transfer Molding Combining BEM And Level Set Method”, accepted to International Journal Applied Mechanics and Materials, Vol. 62, pp 57-65, 2011 Book chapter Optimization in Polymer Processing », A. Gaspar-Cunha and J.A. Covas, eds., Nova Science Publishers, 2011. Communications in conferences 1) F. M. Schmidt, J. F. Agassant, M. Bellet and G. Denis, "Numerical Simulation of Polyester Stretch/Blow Molding Process", Numiform 92, Proc. 4th International Conference on Numerical Methods in Industrial Forming Processes, pp. 383-388, September 1992 2) F. M. Schmidt, J. F. Agassant, M. Bellet and G. Denis, "Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.”, Colloque National Matériaux: Science et industrie, Juin 1992, Paris 3) F. M. Schmidt, J. F. Agassant, M. Bellet and L. Desoutter, "Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.”, Colloque National GFP, Novembre 1992, Lyon 4) F. M. Schmidt, J. F. Agassant, M. Bellet and L. Desoutter, "Viscoelastic Simulation of P.E.T Stretch/Blow Molding", PPS 93, Proc. 9th International Conference of Polymer Processing Society, pp. 335-336, April 1993 5) F. M. Schmidt, J. F. Agassant, M. Bellet and L. Desoutter, "Viscoelastic Simulation of P.E.T Stretch/Blow Molding Process", PPS 94, Proc. 10th International Conference of Polymer Processing Society, pp. 313-314 April 1994 6) F. M. Schmidt, J. F. Agassant, M. Bellet, “Analytic Models for the Simultaneous Inflation and Extension of a Polymeric Tube” in Proceeding of the 12th International Conference of Polymer Processing Society, May 1996 7) F. M. Schmidt, J. F. Agassant, M. Bellet, “Experimental Study of the injection stretch/blow molding process” in Proceeding of the ANTEC ‘97, Society of Plastics Engineers, Toronto, Canada, April 27-May 2, 1997 8) N. Feraud, F. Schmidt, C. Levaillant, “3D Simulation of Gob Transfer in the Delivery System on a Glass Bottle Production Machine”, International User’s Conference of Abaqus, May 29-31, 1996 9) Deschaux-Beaume F., Schmidt, Frety N., Boyer, Levaillant C., “Numerical Simulation of Failure Prediction for Ceramics Tools: Comparison with Forging Test Results”, AMPT’97, July 22-26, 1997 10) Le Maoult Y., F. Schmidt, El Hafi M., Lebaudy P., « Measurement and Calculation of Preform Infrared Heating a first approach », 4th International Workshop on Advanced Infrared Technology and Applications, pp. 321-331, Sept. 15-16, 1997 11) V. Laborde , M. El Hafi, P. Lebaudy, Y. Le Maoult, F. M. Schmidt, “Modélisation du chauffage infra rouge de préformes”, Société Française des Thermiciens ‘97, 20-22 Mai, pp. 699-706, Ed. Elsevier 12) F. M. Schmidt, P. Lafleur, F. Berthet, P. Devos, "Numerical Simulation of RTM using Boundary Element Method", Numiform 98, Proc. 6th International Conference on Numerical Methods in Industrial Forming Processes, Enschede, Netherlands, June 2225, pp. 453-457, 1998 13) Monteix S., R. DiRaddo, F. Schmidt, Le Maoult Y. « Profiled infrared radiative heating in blow moulding and thermoforming» PPS’98 - North American Meeting, Toronto, Canada, Aug 17- 19, pp. 147-148, 1998 14) F.M. Schmidt, N. Reuge, Y. Le Maoult, J.P. Arcens, B. David, F. Abbé, « Inflation Technique Optimization for an Elastomer Biaxial Characterization » in Proceeding of the 15th International Conference of Polymer Processing Society, (The Netherlands), May 31-June 4, 1999 15) Monteix S., F. M. Schmidt, Le Maoult Y., J-P. Arcens, «Modélisation du chauffage infra rouge de préformes en PET », Ive Colloque Franco-québécois, École Polytechnique de Montréal, 25 au 26 Mai 1999 16) T.Cutard, F. Deschaux-Beaume, C. Colin, F. Schmidt, C. Levaillant « Développement d'outillages à base de matériaux céramiques pour la mise en forme de métaux à haute température », Journées de rencontre Industries/Universités. Les propriétés d'usage des réfractaires, Nancy (France), 24-25 Juin 1999 17) Monteix S., F. Schmidt, Le Maoult Y., R. Ben Yedder, R. DiRaddo, D. Laroche, « Experimental Study and Numerical Simulation of Preform or Sheet Infrared Radiative Heating », in Proceeding of AMPT ‘99, Dublin (Ireland), 3-6 August, 1999 18) F.M. Schmidt, S. Monteix, Y. Le Maoult, “Analysis of influent parameters during infrared radiative heating of PET preform” in Proceeding of the 16th International Conference of Polymer Processing Society, June 18-23, (Shangaï, China), 2000 19) M. Rachik, F. Schmidt, N. Reuge, Y. Le Maoult, and F. Abbé “Elastomer Biaxial Characterization, Experimental an Numerical Investigations”, Eccomas 2000, 11-14 September 2000, Barcelona 20) S. Monteix , F.M. Schmidt, , Y. Le Maoult, “Experimental Study and Numerical Simulation of Sheet and Tubular Preform Infrared Radiative Heating” in Proceeding of the Quantitative Infrared Thermography, QIRT’2000, July 18-21, 2000, Université de Reims 21) S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny, “Comparison Between a Numerical Model and an Experimental Approach of Preform Infrared Radiative Heating – Recent Results”, CHT’01 (International Symposium on Advances in Computational Heat Transfer”, Australia, Queensland, 20-25 May 2001 22) S. Monteix, F.M. Schmidt, Y. Le Maoult, G. Denis and M. Vigny, « Recent Issues In Preform Radiative Heating Modelling» in Proceeding of the 17th International Conference of Polymer Processing Society, May 21-24, (Montreal, Canada), 2001 23) S. Monteix, Y. le Maoult, F. Schmidt et J-P. Arcens, “Thermographie Infrarouge Appliquée à la Mise en Forme des Bouteilles en P.E.T”, Thermogram 2001, Paris (Octobre 2001) 24) F.M. Schmidt et Y. Le Maoult, “Modeling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process» in Proceeding of International Conference on Advances in Materials And Processing Technologies, September 18-21, (Leganés, Espagne), 2001 25) I. Busuladzic, F.M. Schmidt and P. Lafleur, “Dispersive prediction of single-screw extruder with mixing head using Boundary Element Method” in Proceeding of the 18th International Conference of Polymer Processing Society, June 16-20, (Guimarès, Portugal), 2002 26) G. Saint-Martin, F.M. Schmidt, P. Devos, C. Levaillant “Advanced controls and measurements for the injection molding of a short fiber reinforced polymer” in Proceeding of the 18th International Conference of Polymer Processing Society, June 16-20, (Guimarès, Portugal), 2002 27) S. Andrieu, Y. Le Maoult, F.M. Schmidt “Infrared Heating Modeling of Thermoplastic Sheets in Thermoforming Process” in Proceeding of the 18th International Conference of Polymer Processing Society, June 16-20, (Guimarès, Portugal), 2002 28) E. Haramburu, F. Collombet, B. Ferret, J-S. Vignes, Pierre Devos, C. Levaillant and F.M. Schmidt “Short-fibre Reinforced Thermoplastic for Semi-structural Parts: Process-properties” in Proceeding of the 8th Euro-Japanese Symposium, 2002 29) S. Andrieu, F. Schmidt and Y. Le Maoult, “Heat conditioning modelling of thermoforming process: comparison with experiments”, in Proceeding of the 19th International Conference of Polymer Processing Society, July 7-10, (Melbourne, Australia), 2003 30) Mathey E., L. Penazzi, F. Schmidt, F. Ronde-Oustau, “Numerical Simulations of Polymer Cooling in Laminated Injection Moulds”,6th ESAFORM, April 28-30, (Salerno) 2003 31) E. Jourdain, Schmidt F., G. Saint-Martin, E. Haramburu, “Fiber Orientation of Meldlines in Injection Molding of Short Fiber Reinforced Thermoplastic: A quantitative Comparison of Experimental and Numerical Results”, 6th ESAFORM, April 28-30, (Salerno) 2003 32) S. Andrieu, F. Schmidt and Y. Le Maoult, “ Infrared heating modelling of thermoplastic sheet during thermoforming process ”, in Proceeding of the 20th International Conference of Polymer Processing Society, June 20-24, (Akron, Ohio, USA), 2004 33) S. Andrieu, F. Schmidt and Y. Le Maoult, Mesures infrarouges appliquées à la modélisation du thermoformage EMAC, p.177-184, 2004, ISBN 2-9511591-3-7, Colloque photomécanique 2004, Albi, FRANCE, 4-6 mai 2004, Extrait de : Photomécanique 2004 - Etude du comportement des matériaux et des structures / sous la dir. de Y. BERTHAUD, P. GABORIT, M. GREDIAC, J.J. ORTEU, L. ROBERT et T. SENTENAC 34) C. Champin, J.-F. Agassant, M. Bellet, F.M. Schmidt, Y. Le Maoult, “3D Finite Element Modelling of the Stretch-Blow Moulding Process”, in Proceeding of the 20th International Conference of Polymer Processing Society, June 20-24, (Akron, Ohio, USA), 2004 35) N. Lebaal, S. Puissant, F. Schmidt, D. Schlaefli, "Déterminations des paramètres d’une loi de viscosité pseudoplastique à l’aide de mesures sur une filière d’extrusion", 9ème Journée de la Matière Condensée, 30 Aôut-3 Septembre 2004, Nancy. 36) E. Mathey, L. Penazzi, F. Ronde-Oustau, F. M. Schmidt, "Automatic optimization of the cooling of injection mould based on the boundary element method", Numiform 04, Proc. 8th International Conference on Numerical Methods in Industrial Forming Processes, Colombus, Ohio (USA), June 13-17, 2004 37) S. Monteix, Y. Le Maoult, F.M. Schmidt, “Quantitative Infrared Thermography applied to blow moulding process: measurement of a heat transfer coefficient”, QUIRT 2004, 4-8 July, Bruxelles, Belgium 38) C. Champin, M. Bellet, F.M. Schmidt, J.-F. Agassant, Y. Le Maoult “3D Finite Element Modelling of the Stretch Blow Moulding Process”, 8th ESAFORM CONFERENCE ON MATERIAL FORMING, pp 905-908, 26-29 April 2005, ClujNapoca (Romania) 39) S.Hmida, F. Schmidt, L. Robert, V. Velay, D. Mercier, « Modélisation du comportement de membranes en polymères durant le procédé de soufflage », 1er congrès Rotomoulage, Thermoformage et Soufflage, Tours, 1-2 décembre 2005 40) M. Bordival, F. Schmidt, Y. Lemaoult, « Optimisation numérique des systèmes de chauffage infrarouge pour le thermoformage et l’injection-soufflage », 1er congrès Rotomoulage, Thermoformage et Soufflage, Tours, 1-2 décembre 2005 41) F. Schmidt, C. Champin, Y. Le Maoult, M. Bellet, Modélisation de l’étape de chauffage IR dans les procédés de soufflage et thermoformage, 1er congrès Rotomoulage, Thermoformage et Soufflage, Tours, 1-2 décembre 2005 42) LEBAAL Nadhir, SCHMIDT Fabrice, PUISSANT Stéphan, « Identification des paramètres rhéologique à l'aide d'une méthode d'optimisation appliquée à l'extrusion en 3D, UNIVERSITE DE TECHNOLOGIE DE TROYES, 6 p., 2005 , CFM 2005 XVIIe Congrès Français de Mécanique, Troyes, FRANCE, 29 août-2 septembre 2005, Extrait de : CFM 2005 - XVIIe Congrès Français de Mécanique/sous la dir. de J.L CHABOCHE 43) M. Bordival, S. Andrieu, F.M. Schmidt, Y. Le Maoult and S. Monteix“Optimisation of Infrared Heating for the thermoforming process”, 8th ESAFORM CONFERENCE ON MATERIAL FORMING, 26-29 April 2005, Cluj-Napoca (Romania) 44) N. Lebaal, S. Puissant, F. Schmidt, "Rheological parameters identification using insitu experimental data of a flat die extrusion", 8th International Conference on advances in materials and processing technologies, 16-19th May 2005, Gliwice-Wisla, (Poland). 45) M. Guichon , C. Boher and F. Schmidt, « An Understanding of Polymer/Mold Contact during Injection Moulding Cycle », PPS-2005: America Regional Meeting 14 Aug 17 Aug 2005 46) M. Bordival, F.M. Schmidt, Y. le Maoult, C. Champin, « Optimisation of infrared heating system for thermoforming and blow molding processes », PPS-2005: America Regional Meeting 14 Aug - 17 Aug 2005 47) N. Lebaal, S. Puissant, F. Schmidt, "Optimization of 3D die extrusion using response surface method", The 9th International Conference on Material Forming ESAFORM, 26-28 April 2006, pp. 703-706, Glasgow, (United Kingdom). 48) Maxime Bordival, Fabrice Schmidt, Yannick Lemaoult, E. Coment, “Measurement of Thermal Contact Resistance Between The Mold And The Polymer For The Stretchblow Molding Process”, 10th ESAFORM CONFERENCE ON MATERIAL FORMING, 26-28 April 2006, Glasgow (UK) 49) Maxime Bordival, Fabrice Schmidt, Yannick Lemaoult, “–Numerical Modelling and Optimization of Infrared Heating System for the Blow Moulding Process”, 9th ESAFORM CONFERENCE ON MATERIAL FORMING, 17-20 April 2007, Zaragoza (Spain) 50) S. Hmida-Maamar, F. Schmidt, L. Robert, V. Velay et L. Chevalier, Identification du Comportement de Membranes en Polymères par Analyse Inverse au cours du Procédé de Soufflage. 2ème congrès Rotomoulage, Thermoformage et Soufflage, Paris, 7-9 novembre 2007 51) M. Bordival, Y. Le Maoult, F. Schmidt, Optimisation de l’Etape de Chauffage du Procédé de Soufflage de Bouteilles en Plastiques, 2ème congrès Rotomoulage, Thermoformage et Soufflage, Paris, 7-9 novembre 2007 52) Behaviour model identification based on inverse modeling and using Optical Full Field Measurements (OFFM) : application on rubber and steel / VELAY Vincent ; ROBERT Laurent ; SCHMIDT Fabrice ; HMIDA-MAAMAR Samia ; VALLET Thierry. AMERICAN INSTITUTE OF PHYSICS, 2007, vol. Part A. - pp.33-38 53) Maxime Bordival, Fabrice Schmidt, Yannick Le Maoult, V. Velay, “Simulation of the two stages Stretch-Blow Molding Process”, NUMIFORM 2007, Proc. 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto (Portugal), June 17-21, 2007 54) Nicolas Pirc, F. Bugarin, F. Schmidt, M. Mongeau, “Cooling Channel Optimisation for injection molding”, NUMIFORM 2007, Proc. 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto (Portugal), June 17-21, 2007 55) N. Lebaal, F. Schmidt, S. Puissant, "Optimizations of coat-hanger die, using constraint optimization algorithm and Taguchi method", Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes; Porto, (Portugal). AIP Conf. Proc. May 17, 2007, Volume 908, pp. 537-544. 56) M. Oudjene, N. Lebaal, L. Ben-Ayed and J-L. Batoz, « Application of a Kriging Method for Shape Optimisation of Sheet Metal Forming Tools », IX Internatinal Conference on Computational Plasticity, COMPLAS IX, Barcelona, 2007 57) ROBERT Laurent, HMIDA-MAAMAR Samia, VELAY Vincent, SCHMIDT Fabrice “Determination of the elongational properties of polymers using a mixed numericalexperimental method”, SPRINGER, 8 p., 2007, ISBN 978-1-4020-6238-4, ICEM13 13th International conference on experimental mechanics, Alexandroupolis, GRECE, July 1-6, 2007 58) N. Lebaal, F.M. Schmidt, S. Puissant and D. Schläfli, "Optimization of coat-hanger melt distributors for the wire coating process". Proceedings of the Polymer Processing Society 24th Annual Meeting, PPS-24, June 15-19, 2008 Salerno (Italy). 59) Maxime Bordival, Fabrice Schmidt, Yannick Lemaoult, “Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles”, 11th ESAFORM CONFERENCE ON MATERIAL FORMING, 23-25 April 2008, Lyon (France) 60) N. Pirc, F.M. Schmidt, M. Mongeau, F. Bugarin, F. Chinesta, Optimization of BEMbased Cooling Channels Injection Moulding Using Model Reduction, International Journal of Material Forming. 10.1007/s12289-008-0197-7 61) R. Bertolaso, F. Ronde-Oustau, M. Cheikh and F. Schmidt Stress distribution measurement inside ball screw system using photoelasticity technique Photomechanics 2008, Loughborough (UK), July 2008 62) N. Lebaal, F.M. Schmidt, S. Puissant and D. Schläfli, " Application of a Response Surface Method to the optimal design of the wall temperature profiles in extrusion die". International Conference on advances in materials and processing technologies, AMPT, November 2008, Manama, (Kingdom of Bahrain). 63) Y. Ledru, R. Piquet, F. Schmidt, L. Michel, G. Bernhart, Modeling of voids growth mechanisms during manufacturing composites laminates”, FPCM-9, 9th International Conference on Flow Processes in Composite Material, Montréal (Québec), Canada, 810 July 2008 64) Y. Ledru, R. Piquet, F. Schmidt, L. Michel, G. Bernhart, Voids growth mechanisms during manufacturing of aeronautical composite laminates First Japanese-French Joint Workhop (EMAC-Tohoku University-INSA),Albi (France), 1-2 December 2008. 65) G. Bernhart, T. Cutard, Y. Le Maoult, F. Schmidt, J.-P. Arcens, Infra-red sheet heating assisted Superplastic Forming EuroSPF2008, 6th European Conference on Superplastic Forming, Carcassonne (France), 3-5 september 2008 66) N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta, Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction, 12th ESAFORM CONFERENCE ON MATERIAL FORMING, 27-29 April 2009, Enschede (The Netherlands) 67) M. Bordival, Y. Le Maoult, F. Schmidt, « Thickness Optimisation of Inflated Preforms by Varying Infrared Heatong Coefficients”, 3ème congrès Rotomoulage, Thermoformage et Soufflage, Albi, 11-13 Mars 2009 68) Y. Ledru, R. Piquet, F. Schmidt, L. Michel, G. Bernhart,“ Voids growth mechanisms during manufacturing of aeronautical composite laminates”, 3ème congrès Rotomoulage, Thermoformage et Soufflage, Albi, 11-13 Mars 2009 69) B. Cosson, F. Schmidt, Y. Le Maoult, Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method, 12th ESAFORM CONFERENCE ON MATERIAL FORMING, 27-29 April 2009, Enschede (The Netherlands) 70) R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc, F. Schmidt, “BEM simulation of 3D updated resin front for LCM processes”, ICSAAM 2009, September 7-10, 2009 71) Quantification 2-D et 3-D de la porosité par analyse d'image dans les matériaux composites stratifiés aéronautiques = 2-D and 3-D quantification with image analyses in aeronautic composite laminates / LEDRU Yohann ; PIQUET Robert ; MICHEL Laurent ; SCHMIDT Fabrice ; BERNHART Gérard. AMAC, 2009. - 11 p., ISBN 9782-87717-092-6 72) M. Bordival, F.M. Schmidt, Y. Le Maoult, B. Cosson, “A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics”, 13th ESAFORM CONFERENCE ON MATERIAL FORMING, Brescia – Italy, April 7-9, 2010 73) R. Gantois, A. Cantarel, J.-N. Félices, F. Schmidt, “Numerical simulation of Resin Transfer Molding using BEM and Level Set method”, 13th ESAFORM CONFERENCE ON MATERIAL FORMING, Brescia – Italy, April 7-9, 2010 74) S. Nakouzi , J. Pancrace, F.M. Schmidt, Y. Le Maoult, F. Berthet, “Curing simulation of composites coupled with infrared heating”, 13th ESAFORM CONFERENCE ON MATERIAL FORMING, Brescia – Italy, April 7-9, 2010 75) GANTOIS Renaud; CANTAREL Arthur; DUSSERRE Gilles; FELICES Jean-Noël, SCHMIDT Fabrice, “Mold filling simulation of resin transfer molding combining BEM and level set method”, ACMA 2010 - International symposium on composites and aircraft materials, May 12-14, 2010, Marrakech, MOROCCO 76) Sawsane NAKOUZI, Johann PANCRACE, Fabrice SCHMIDT, Yannick LE MAOULT, Florentin BERTHET, “Simulation de la polymérisation par infrarouge du composite », SFT 2011, 24-27 Mai 2011, Perpignan 77) Florentin Berthet, Sawsane Nakouzi , Fabrice Schmidt et Yannick le Maoult « Cartes de température maximum lors de la simulation de la réticulation de la résine RTM6 ans une plaque composite », JNC 17 - Poitiers 2011 78) S. Nakouzi, J. Pancrace, F. M. Schmidt, Y. Le Maoult, and F. Berthet, “ Infrared curing simulations of liquid composites molding”, AIP Conf. Proc. May 4, 2011, Volume 1353, pp. 1125-1130, THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011 Chairman of mini-symposium « Thermoforming and blow moulding » of international conference Polymer Processing Society (PPS’98 - Toronto Aug. 17- 19, 1998) Chairman of mini-symposium « Free Surface Moulding» of international conference Polymer Processing Society (PPS’02 - Guimares June. 16- 20, 2002) Organizer of mini-symposium « Heat Transfer Modelling in Material Forming Processes» in ESAFORM CONFERENCE ON MATERIAL FORMING from 2006 to 2009 Organizer of mini-symposium « Tools Optimisation in Forming Processes» in NUMIFORM CONFERENCE , june 2007 Organizer of mini-symposium « Structures, properties and processing of polymers» in ESAFORM CONFERENCE ON MATERIAL FORMING since 2010 Chairman of mini-symposia « Injection 1» and “Polymer Composites and Process 3” in AMPT CONFERENCE, October 2010