List of major publications - Cemef

 J.F.Agassant : liste de publications au 27 Août 2008
Ouvrages de synthèse
La Mise en Forme des Matières Plastiques, Technique et Documentation
1ère édition (1982) P. AVENAS, J.F. AGASSANT, J. Ph. SERGENT
2ème édition (1986) J.F. AGASSANT, P. AVENAS, J. Ph. SERGENT
3ème édition (1996) J.F. AGASSANT, P. AVENAS, J. Ph. SERGENT, B. VERGNES, M. VINCENT
Polymer Processing, Principles and Modeling, J.F. AGASSANT, P. AVENAS,
J. Ph.SERGENT, P. CARREAU, Hanser Publishers, Munich (1991)
Rheological Fundamentals of Polymer Processing. J.A. COVAS, J.F. AGASSANT, A.C. DIOGO,
J. VLACHOPOULOS, K. WALTERS Editeurs, Nato Asi series, Kluwer, Dordrecht (1995)
Rheology for Polymer Processing, J.M. PIAU, J.F. AGASSANT Editeurs, Elsevier, Amsterdam (1996)
Chapitres de livres
J.F. AGASSANT, B. VERGNES, E. WEY, Contribution de la modélisation à l'optimisation de l'extrusion
monovis des polymères thermoplastiques; cuisson extrusion, éditeur P. Colonna, INRA, Paris, p. 99,
(1987)
J.F. AGASSANT, M. VINCENT, Initiation à la chimie et à la physicochimie macromoléculaire,
"Prédiction de l'orientation des fibres de verre lors de l'injection de thermoplastiques renforcés"
Chapitre V, Vol.7, Matériaux Composites à bases de polymères, Editeur Marguerite Rinaudo - GFP
(1989)
J.F. AGASSANT, J.M. HAUDIN, Mise en forme des polymères, chapitre 2.3.2 in Pratique des
Matériaux Industriels, Editeur Michel Colombié, Dunod (1991 - 1994) ; Nouvelle édition ( 2007)
M. VINCENT, J.F. AGASSANT, Predicting fiber orientation in injection molding, In Two phase polymer
systems, Editeur L.A. Utracki, Hanser Publishers, Munich (1991)
M. VINCENT, J.F. AGASSANT, The injection of fiber reinforced polymers, in Materials : Today and
Tomorrow, Rhône-Poulenc Editeur (1991)
J.F. AGASSANT, A. POITOU, A kinematic approach of distributive mixing, in "Mixing and
compounding", Editeur I. Manas Zloczower, Progress in Polymer Processing Series, Hanser Publishers,
Munich (1994)
J.F. AGASSANT, B. VERGNES, E. WEY, Modeling and optimization of single screw extrusion for
thermoplastics, E. WEY, in Rheological Fundamentals of Polymer Processing, Editeurs J.A. Covas, J.F.
Agassant, A.C. Diogo, J. Vlachopoulos, K. Walters, Nato Asi series, Kluwer, Dordrecht (1995)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © J.F. AGASSANT, B. VERGNES, M. VINCENT, Polymer Processing Modelling - Approximation methods,
in Rheological Fundamentals of Polymer Processing, Editeurs J.A. Covas, J.F. Agassant, A.C. Diogo, J.
Vlachopoulos, K. Walters, Nato Asi series, Kluwer, Dordrecht (1995)
J. GUILLET, C. CARROT, B.S. KIM, J.F. AGASSANT, B. VERGNES, C. BERAUDO, J.R. CLERMONT, M.
NORMANDIN, Y. BEREAUX, Comparison between experimental data and numerical models, in Rheology
for Polymer Processing, Editeurs J.M. Piau, J.F. Agassant, Elsevier, Amsterdam (1996)
J.F. AGASSANT, General Principles of Polymer Processing Modeling, Volume 18, Processing of
polymers, edited by H.E.H. Meijer, Materials Science and Technology Serie, Editeurs R.W. Cahn, P.
Haasen and E.J. Kramer , VCH (Allemagne) (1997)
J.F. AGASSANT, T. COUPEZ, Y. DEMAY, B. VERGNES, M. VINCENT, Thermomechanical modelling of
polymer processing, in : Advances in the Flow and Rheology of Non-Newtonian Fluids, Editeurs D.A.
Siginer, R.P. Chhabra, D. De Kee, Elsevier (1999)
R. VALETTE, L. GAVRUS, P. LAURE, B. VERGNES, Y. DEMAY, J.F. AGASSANT, Etude de la
stabilité du procédé de coextrusion, Surfaces, Tribologie et Formage des Matériaux, Editions de
l'Ecole des Mines, (2001)
L. SILVA, J.F.AGASSANT, T.COUPEZ, Three dimensional Injection Molding Simulation,
in :Injection Molding, Fundamentals and Applications, Editeur M. Kamal, ( Hanser) , à paraitre
J.F. AGASSANT, J. COVAS, An Overview of Polymer Processing Modelling, Editeur F. Chinesta,
( Elsevier)
J.F.Agassant, A.Poitou , Rudy Valette, A Kinematic Approach to distributive mixing, in: Mixing
and Compounding of polymers, 2nd edition, Ica-Manas Zloczower ed. ( Hanser); à paraitre
Publications dans des revues ou ouvrages à comité de lecture
A. LEVEQUE, J.F. AGASSANT, P. AVENAS, Injection of P.V.C. with a screwless press, J. Macromol.
Sci. Phys., B 14 (3), 431-436 (1977)
J.F. AGASSANT et P. AVENAS, Calendering of P.V.C., Prediction of stress and torque, J. Macromol.
Sci. Phys., B 14 (3), 345-365 (1977)
J.L. BOURGEOIS et J.F. AGASSANT, Calendering of P.V.C., Defects in calendered films and sheets, J.
Macromol. Sci. Phys., B 14 (3), 376-385 (1977)
Y. DEMAY, J.F. AGASSANT, Application de la stabilité linéaire à l'étude du filage textile isotherme et
non isotherme. J. Meca. Théorique et Appliquée, 1, 763 (1982)
J.P. VILLEMAIRE, J.F. AGASSANT, Apparent viscosity measurements using a capillary viscometer
with preshearing. Polymer Process Engineering, 1, 221 (1983)
B. VERGNES, P. SAILLARD, J.F. AGASSANT, Non isothermal flow of a molten polymer in a coat hanger
die, Polym. Eng. Sci., 24, 980-987 (1984)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © P. SAILLARD, B. VERGNES, J.F. AGASSANT, Study of the wall thickness defects encountered in
P.V.C. pipe extrusion, Polym. Proc. Eng., 2, 53-68 (1984)
P. SAILLARD, J.F. AGASSANT, Polymer flow in a spiral mandrel die for tubular films, Polym. Proc. Eng.,
2, 37-52 (1984)
M. VINCENT, J.F. AGASSANT, F.X. de CHARENTENAY, A. OUALHA, Calcul des contraintes
résiduelles dans le gainage en polymère d'un câble de télécommunications sous-marin, J. Méca.
Théorique et Appliquée, 3, 243 (1984)
J.F. AGASSANT, M. ESPY, Theoretical and experimental study of the molten polymer flow in the
calender bank, Polym. Eng. Sci., 25, 118 (1985)
Y. DEMAY, J.F. AGASSANT, Experimental study of the draw resonance in fiber spinning, J. Non Newt.
Fluid. Mech., 18, 187 (1985)
M. VINCENT, J.F. AGASSANT, Experimental and theoretical study of short fiber orientation in
diverging flows, Rheol. Acta, 24, 603 (1985)
G. SORNBERGER, B. VERGNES, J.F. AGASSANT, Two dimensional coextrusion flow of two molten
polymers in flat dies, Polym. Eng. Sci., 26, 451 (1986)
G. SORNBERGER, B. VERGNES, J.F. AGASSANT, Coextrusion flow of two molten polymers between
parallel plates : Non isothermal computation and experimental study, Polym. Eng. Sci., 26, 682 (1986)
M. VINCENT, J.F. AGASSANT, Experimental study and calculations of short glass fiber orientation in
a center gated molded disk. Polym. Composites, 7, 76 (1986)
A. ALLES, S. PHILIPON, J.F. AGASSANT, M. VINCENT, G. DEHAY, P. LEREBOURS, Experimental and
theoretical study of the filling stage of a rectangular plaque : application to a spiral mold, Polym. Proc.
Eng. 4, 71 (1986)
B. VERGNES, J.F. AGASSANT, Die flow computations: a method to solve industrial problems in polymer
processing, Advances Polym. Techn. 6 (1986)
G. SORNBERGER, J.C. QUANTIN, R. FAJOLLE, B. VERGNES et J.F. AGASSANT, Experimental study
of the sharkskin defect in linear low density polyethylene, J. Non Newt. Fluid Mech., 23, 123 (1987)
J.F. AGASSANT, H. ALLES, S. PHILIPON, M. VINCENT, Experimental and theoretical study of the
injection molding of thermoplastic materials, Polym. Eng. Sci. 28, 460 (1988)
H. ALLES, J.F. AGASSANT, M. VINCENT, G. DEHAY, P. LEREBOURS, B. GINGLINGER, Experimental
study of the injection of two industrial molds. Comparison with a computation program. Int. Polym.
Proc., 2, 191 (1988)
M. VINCENT, Y. GERMAIN et J.F. AGASSANT, Numerical and experimental study of the fiber motion
in reinforced thermoplastics flows, special issue of Rheol. Acta, Progress and Trends in Rheology II,
144 (1988)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © J.L. WILLIEN, Y. DEMAY, J.F. AGASSANT, Etude de la stabilité d'étirage d'un fluide newtonien:
application au filage textile et au fibrage du verre, J. Meca. Theo. Appl. 7 (6) 1 (1988)
J.F. AGASSANT, J.P. VILLEMAIRE, Rheology for polymer processing: an overview of the present
knowledge and some open problems, Makromol. Chem., Macromol. Symp., 22, 39 (1988)
P. BEAUFILS, B. VERGNES et J.F. AGASSANT, Characterization of the sharkskin defect and its
development with the flow conditions, Int. Polym. Proc., 4, 78 (1989)
J. LEBLANC, J.P. VILLEMAIRE, B. VERGNES et J.F. AGASSANT, Effect of wall slippage on pressure
drop in converging dies when extruding natural rubber compounds, Plast. Rubber Proc. Appl., 11, 53
(1989)
P. BARQ, J.M. HAUDIN, J.F. AGASSANT, H. ROTH, P. BOURGIN, Instability phenomena in film
casting process. Experimental and numerical approaches, Int. Polym. Proc., 5, 264 (1990)
S. D'HALEWYN, J.F. AGASSANT, Y. DEMAY, Numerical simulation of the cast film process. Polym.
Eng. Sci., 30, 335 (1990)
H. MADERS, Y. DEMAY, J.F. AGASSANT, Numerical and analytical study of the stress singularity in an
isothermal Newtonian Stokes flow in a plane convergent geometry, Eur. J. Mech. B, Fluids, 9, 75 (1990)
R. DUCLOUX, J.F. AGASSANT, M. VINCENT, A non isotropic model for compression molding of long
glass fiber reinforced thermoplastic sheets, SPE ANTEC Tech. Paper, 37, 2062 (1991)
J.L. LEBLANC, R. POLLET, S. ANDRIETTI, M. VINCENT, J.F. AGASSANT, Comparison between the
prediction of a simulation software and the injection moulding behaviour of rubber compounds as
measured with an instrumented machine, Kautschukgummi; Kunststoffe, 44, 690 (1991)
H. MADERS, Y. DEMAY, J.F. AGASSANT, A decoupled finite element method to compute stationary
upper-convected Maxwell fluid flow in 2D convergent geometry, Engineering computation, 9, 371 (1992)
R. BLANC, J.F. AGASSANT, M. VINCENT, Injection molding of unsaturated polyester compounds,
Polym. Eng. Sci., 32, 1440 (1992)
G. AUSIAS, J.F. AGASSANT, M. VINCENT, P.G. LAFLEUR, P.A. LAVOIE, P.J. CARREAU, Rheology of
short glass fiber reinforced Polypropylene, Journal of Rheology, 36, 525 (1992)
S. PUISSANT, B. VERGNES, Y. DEMAY, J.F. AGASSANT, A general non-isothermal model for onedimensional multilayer coextrusion flow, Polym. Eng. Sci. , 32, 213 (1992)
R. DUCLOUX, A. POITOU, M. VINCENT, J.F. AGASSANT, Simulation of compression molding of long
glass fiber reinforced thermoplastic sheets, Polym. Composites, 13, 30 (1992)
A. FORTIN, Y. DEMAY et J.F. AGASSANT, Computation of stationary interface between generalized
Newtonian fluids, Revue Européenne des Eléments Finis, 1, 181 (1992)
H. MADERS, B. VERGNES, Y. DEMAY et J.F. AGASSANT, Steady flow of a White-Metzner fluid in a
2D abrupt contraction : computation and experiments, J. Non-Newt. Fluid Mech., 45, 63 (1992)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © P. MOURNIAC, J.F. AGASSANT et B. VERGNES , Determination of wall slip velocity in the flow of a
SBR coumpound, Rheol. Acta, 31, 565 (1992)
J.F. AGASSANT, B. VERGNES et M. VINCENT, General principles of polymer processing modeling.
Makromol. Chem., Macromol. Symp., 68, 153 (1993)
D.G. KIRIAKIDIS, H.J.PARK, E. MITSOULIS, B. VERGNES et J.F. AGASSANT, A study of stress
distribution in contraction flows of an LLDPE melt. J. Non-Newt. Fluid Mech., 47, 339 (1993)
G. AUSIAS, J.F. AGASSANT et M. VINCENT, Flow and fiber orientation calculations in reinforced
thermoplastic extruded tubes. Int. Polym. Proc., 9, 51 (1994)
S. PUISSANT, Y. DEMAY, B. VERGNES et J.F. AGASSANT, Two dimensional multilayer coextrusion
flow in a coat-hanger die. Part 1: Modeling, Polym.Eng.Sci., 34, 20 (1994)
J.F. AGASSANT, A. FORTIN et Y. DEMAY, Prediction of stationary interfaces in coextrusion flows,
Polym. Eng. Sci., 34, 1101 (1994)
B. KNOBEL, J.P. VILLEMAIRE et J.F. AGASSANT, Influence of the thermomechanical parameters on
the morphology of a Polyamide (PA 6) Polypropylene blend, Int. Polym. Proc., 9, 119 (1994)
P. BARQ, J.M. HAUDIN , J.F. AGASSANT et P. BOURGIN, Stationary and dynamic analysis of film
casting process, a viscoelastic approach, Int. Polym. Proc., 9, 350 (1994)
F. BOITOUT, J.F. AGASSANT et M. VINCENT, Elastic calculation of residual stresses in injection
molding: influence of mold deformation and pressure in the liquid, Int. Polym. Proc., 10, 237 (1995)
O. DENIZART, M. VINCENT et J.F. AGASSANT, Thermal stresses in injection moulding: experiments
and computations. J. Mat. Sci., 30, 552 (1995)
S. PUISSANT, B. VERGNES, Y. DEMAY, J.F. AGASSANT, J.J. LABAIG, Two-dimensional multilayer
coextrusion flow in a flat coat-hanger die. Part 2: Experimentation and theoretical validation, Polym.
Eng. Sci., vol. 36, p. 936-942 (1996)
D. SILAGY, Y. DEMAY, J.F. AGASSANT, Etude de la stabilité linéaire de l'étirage d'un film newtonien,
C.R. Acad. Sci. Paris, vol. 322 Série IIb, p. 283-289 (1996)
V. DURAND, B. VERGNES, J.F. AGASSANT, E. BENOIT, R.J. KOOPMANS, Experimental and
theoretical approach of the oscillating flow of high density polyethylenes, J. Rheol. 40, 383 (1996)
F. SCHMIDT, J.F. AGASSANT, M. BELLET, L. DESOUTTER, Viscoelastic simulation of PET
stretch/blow molding process, J. Non Newt. Flui Mech., 64, 19 (1996)
D. SILAGY, Y. DEMAY, J.F. AGASSANT, Study of the stability of hte cast film process, Polym. Eng.
Sci., 36, 1614-1625 (1996)
J.M. ANDRE, Y. DEMAY, J.F. AGASSANT, Modélisation du soufflage de gaine , C.R. Acad. Sci. Paris, t.
325, série IIb, 621-629 (1997)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © G. SCHLATTER, M.VINCENT, J.F. AGASSANT, Unsteady flow of two viscous fluids in a tubular cavity.
Application to co-injection molding of thermoplastic polymers, Eur. J. Mech., B/Fluids, 16, 693 (1997)
M. VINCENT, E. DEVILERS, J.-F. AGASSANT, Fibre orientation calculation in injection moulding of
reinforced thermoplastics, J. Non-Newt. Fluid Mech., 73, 317-326 (1997)
J.M. ANDRE, J.F. AGASSANT, Y. DEMAY, J.M. HAUDIN, B. MONASSE, Numerical Modelling of the
Polymer Film Blowing Process , Int. J. of Forming Processes, 1, 197-210 (1998)
C. BÉRAUDO, A. FORTIN, T. COUPEZ, Y. DEMAY, B. VERGNES, J.F. AGASSANT, A finite element
method for computing the flow of multi-mode viscoelastic fluids: comparison with experiments, J. Non
Newt. Fluid Mech., 75, 1-23 (1998)
I. HÉNAUT, B. VERGNES, J.F. AGASSANT, J.M. HAUDIN, Interactions in binary and ternary
polyolefin blends.Effects of processing on mechanical properties, Intern. Polym. Proc., 13, 199-208
(1998)
B. DEBBAUT, A. GOUBLOMME, O. HOMERIN, R. KOOPMANS, D. LIEBMAN, J. MEISSNER,
B. SCHROETER, B. RECKMANN, T. DAPONTE, P. VERSCHAEREN, J.F. AGASSANT, B. VERGNES,
C. VENET, Development of high quality LLDPE and optimised processing for film blowing, Intern. Polym.
Proc., 13, 262-270 (1998)
D. SILAGY, Y. DEMAY, J.F. AGASSANT, Stationary and stability analysis of the film casting process,
J. Non.Newt. Fluid Mech., 79, 563-583 (1998)
F.M. SCHMIDT, J.F. AGASSANT, M. BELLET, Experimental study and Numerical Simulation of the
Injection Stretch/Blow Molding Process, Polym. Eng. Sci., 38, 1399-1412 (1998)
G. SCHLATTER, J.F. AGASSANT, A. DAVIDOFF, M. VINCENT, An unsteady multifluid flow model:
application to sandwich injection molding process, Polym. Eng. Sci., 39, 78-88 (1999)
D. SILAGY, Y. DEMAY, J.F. AGASSANT, Numerical simulation of the film casting process, Int. J. for
Numerical Methods in Fluids, 30, 1-18 (1999)
M. VAN ISEGHEM, L. FOURMENT, J.F. AGASSANT, Residual stress simulation in a glass/metal
contact, Int. J. of Forming Processes, 2, 137-156 (1999)
N. BILLON, H. KAPPEL, S. CROZET, F. BAY, J.F. AGASSANT, J.M. HAUDIN., Relations anisotropiepropriétés mécaniques de tubes PVC biorientés, La Revue de Métallurgie - CIT/ Science et Génie des
Matériaux, n° 12, 1517-1522 (1999)
F.M. SCHMIDT, A. RODRIGUEZ-VILLA, J.F. AGASSANT, M. BELLET, Analytical models for the
inflation of a polymeric tube, European Journal of Mechanics A/Solids, 19, 89-104 (2000)
E. GORLIER, J.F. AGASSANT, J.M. HAUDIN, N. BILLON, Experimental and theoretical study
of uniaxial deformation of amorphous poly(ethylene terephthalate) above glass transition
temperature, Plastics, Rubber and Composites, vol. 30, pp 48-55 (2001)
J.F. AGASSANT, F. BAAIJENS, H. BASTIAN, A. BERNNAT, T. COUPEZ, B. DEBBAUT, A.L.
GAVRUS, A. GOUBLOMME, M. VAN GURP, R.J. KOOPMANS, H.M. LAUN, K. LEE, O.H.
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © NOUATIN, M.R. MACKLEY, G.W.M. PETERS, G. REKERS, W.M.H. VERBEETEN, B. VERGNES,
M.H. WAGNER, E. WASSER, W.F. ZOETELIEF, The matching of experimental polymer
processing flows to viscoelastic numerical simulation, Intern. Polym. Proc., vol. 17, pp 3-10 (2002)
J. LAFFARGUE, L. PARENT, P.G. LAFLEUR, P.J. CARREAU, Y. DEMAY, J.F. AGASSANT,
Investigation of Bubble Instabilities in Film Blowing Process, Int. Polym. Proc. 17, 347-353
(2002)
SOLLOGOUB C., DEMAY Y., AGASSANT J.-F., Cast Film Problem, A non-isothermal
investigation, Int. Polym. Proc. 18, pp 80-86 (2003)
VALETTE R., LAURE P., DEMAY Y., AGASSANT J.-F., Investigation of the interfacial
instabilities in the coextrusion flow of PS and PE, Int. Polym. Proc. 18, pp 171-178 (2003)
VALETTE Rudy, LAURE Patrice, DEMAY Yves, AGASSANT Jean-François, Experimental
Investigation of the development of interfacial instabilities in two layers coextrusion dies, Int.
Polym. Proc., vol. 19, pp 118-128 (2004)
VALETTE Rudy, LAURE Patrice, DEMAY Yves, AGASSANT Jean-François, Convective linear
stability analysis of two-layer coextusion flow for molten polymers, J. Non-Newt. Fluid Mech.,
vol. 121, pp 41-53 (2004)
BOKOBZA Liliane, BURR Alain, GARNAUD Gilles, PERRIN Michel-Yves, PAGNOTTA Sophie,
Fibre reinforcement of elastomers: nanocomposites based on sepiolite and poly(hydroxyethyl
acrylate, Polymer International, août 2004, vol. 53, Issue 8, pp 1060-1065 (2004)
C. SOLLOGOUB, Y. DEMAY, J.F. AGASSANT, Cast Film problem : a non isothermal investigation,
Int. Polym. Proc. 18, 80-86 (2005)
R. VALETTE, P. LAURE, Y. DEMAY, J.F. AGASSANT, Investigation of the interfacial instabilities
in the coextrusion flow of PE and PS, Int. Polym. Proc. 18 (2005)
SILVA Luisa, GRUAU Cyril, AGASSANT Jean-François, COUPEZ Thierry, AUFFREY Jocelyn.,
Advanced Finite element 3D Injection Molding, Intern. Polym. Proc., vol. 20, p. 265-273 (2005)
AGASSANT Jean-François, DEMAY Yves, SOLLOGOUB Cyrille, SILAGY David, Cast Film
Extrusion, Intern. Polym. Proc., vol. 20, p. 136-148 (2005)
GAMACHE Eric, AGASSANT Jean-François, DEMAY Yves, LAFLEUR Pierre G., Evaluation of
stresses in a two-layer coextruded LDPE melt blowing film, J. of plastic Film and Sheeting, vol.
21, p. 127-144 (2005)
VINAY Guillaume, WACHS Anthony, AGASSANT Jean-François, Numerical simulation of nonisothermal viscoplastic waxy crude oil flows, J. of Non Newt. Fluid Mech., vol. 128, p. 144-162
(2005)
AGASSANT Jean-François, ARDA Dawn, COMBEAUD Christelle, MERTEN Armin, MUNSTEDT
Helmut, MACKLEY Malcolm , ROBERT Laurent, VERGNES Bruno, Polymer processing extrusion
instabilities and methods for their elimination or minimisation, Intern. Polym. Proc. , vol. 21, p
239-255 ( 2006)
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ © VINAY Guillaume, WACHS Anthony, AGASSANT Jean-François, Numerical simulation of weakly
compressible Bingham flows, : the resart of pipeline flows of waxy crude oils, J. Non Newt. Fluid
Mech., vol 136, p 93-105 (2006)
SOLLOGOUB Cyrille, DEMAY Yves, AGASSANT Jean-François, Non-Isothermal viscoelastic
numerical model of the cast-film process, J. Non Newt. Fluid Mech., vol 138, p 76-86 ( 2006)
DEVISME Samuel, HAUDIN Jean-Marc, AGASSANT Jean-François, RAULINE Damien,
CHOPINEZ Fabrice, Numerical simulation of extrusion coating, Intern. Polym. Proc., vol. 22, p
90-104 ( 2007)
F.Godard, M.Vincent, J.F.Agassant, B.Vergnes, Etude du comportement rhéologique et des
propriétés mécaniques de composites sciures de bois - Polyéthylène haute densité, Rhéologie 13,
9-21 ( 2008)
C.Sollogoub,E.Felder, Y.Demay, P.Deparis, N.Migler, Thermomechanical analysis and modelling of
the extrusion coating process, accepté dans Polymer Engineering and Science
S.Devisme, J.M.Haudin, J.F.Agassant, R.Combarieu, D.Rauline , F.Chopinez, Adhesion in
Polypropylene/ Aluminium laminates made by extrusion coating, accepté dans Journal of applied
Polymer Science
CEMEF – Mines ParisTech http://www.cemef.mines‐paristech.fr/ ©