nc programmer - Sami Engineering
Transcription
nc programmer - Sami Engineering
NC PROGRAMMER Lieu : Zaventem (Bruxelles) Début mission : Immédiatement Durée : En vue d’engagement (CDI) 1. FUNCTION NC-programmer is responsible to deliver NC-programs with a good quality within the agreed deadlines and NRC budget (programming time) The NC-programmer is responsible to deliver a program within the budget (NC-time) Tasks NC programming in CATIA V5 (V4) Following directions of Method Agent for cutting strategy, but challenge the suggestions if there may be a better method / strategy Post-processing with existing post-processors Checking NC programs in Vericut Creating ACC (auto control cards) together with method agent (used by machine operators for online measurements) – which is part of the control plan Creating Shop/Logbook Verifying cutting tool data in TDM (Tool Data Management) and Vericut Libraries Assist in establishing fixturing / method / cutting tools-cutting conditions Give shop floor support (if requested by method agent) 2. SKILLS – EXPERIENCE 2-5 years of experience in NC-programming (preferably CATIA) of which at least 6 months active experience in CATIA V5 (training excluded). Preferably experience in machining hard metals (preferably aerospace parts) CATIA V5 (+V4) VERICUT Postprocessor Independent and proactive/communicative Strong technical background and interest in machining process difficulties Attention to detail 3. EDUCATION Industrial engineer or someone with a background as CNC operator who grew into programming. 4. LANGUAGES Knowledge of more than one of these languages (however, not essential): French, Dutch, English. Parc Industriel des Hauts-Sarts – 4040 HERSTAL (Belgique) – Tél. : 04/264.13.44 – Fax : 04/264.07.39 [email protected] TVA BE 0436.847.517 – ING 340-0554492-78 - RCLg 167.248 – N° d’entrepreneur 436.847.517/09/27/11