220MFnnPWXXXXD-FHCFHC
Transcription
220MFnnPWXXXXD-FHCFHC
CUT A-A Pitch=2 First LF contact D (3.45) A B C D 15 220 MF n n PW XXXX D - Pitch=2 4 ±0.10 - (5.8) Contact : Phosphor bronze Housing : Thermoplastic with glass fiber Classified UL 94 V0 Black. Cable : - White polyester classified UL 2643 or 2690 - Polyethylene naphthalate (PEN) - Polyimide Jackscrew : Stainless steel . Left cable side PLATING : - Contact code F1 : tin plated (thickness : Ni 1 to 2µ + Sn pur brillant 3 to 5µ) Contact code F2 : gold plated (thickness : Ni 1 to 2µ + Sn pur brilliant 3 to 5µ + Au 0.15µ) Contact code F3 : gold plated (thickness : Ni 1 to 2µ + Sn pur brilliant 3 to 5µ + Au 0.75µ) Type • • 220 : MF : 2. Cable specification CMM220 serie MICROFLEX • XXXX : • D: 3. Left cable side Length in mm measured from end to end (Thi s l ength is used to determine the cable length, see explanation in 5.) Conductor size (0.076 mm x 0.66 mm) 2 blocks are defined to determine the left section of the cable • FH : Fixing hardware (refer to the table with Fixing hardware) • C: Contact sel ected on the left side of the cable (refer to the table with contacts on the right) MECHANICAL SPECIFICATIONS FOR THE CONTACT : 3 - 1. 4 4 blocks are defined to determine the cable specification • nn : number of conductors • PW : Cable style – PW: Standard White Polyester or – NW: Polyethyl ene naphthalate (PEN) or – KW: Polyimide MATERIAL : - C Right cable side termination CMM220 serie G (3.5) (A) B TECHNICAL DATA FH Left cable side termination Cable specification 5.5 == MicroFlex A (3.5) C E A F FH Max. mating force per contact : 1 N Min. unmating force per contact : 0.2 N Tensile strength : 50 N (using our standard FFC) Retention force : 20 N 4. 3 Right cable side 2 blocks are defined to determine the left section of the cable Minimun breakdown voltage : 1000 Vrms Dielectric withstanding voltage : 750 Vrms Rated voltage : 250 Vrms Maximum current per contact : 3 A Contact resistance : 15 mOhms max. Code A: Adhesive in option THERMAL SPECIFICATIONS : - • • • • L - XXXX ELECTRICAL SPECIFICATIONS FOR THE CONTACT CONTACT : 5. 1 C D E F G 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 (2.5) B Adhesive used to attach cables together (Option). Operating temperature -40°C to 150°C. Cable length Fixing hardware FH Therefore, we need to c ut the c able with a length of 88.4mm to get a jumper length of 100mm. Right cable side Tolerance for the cable cut : Minimum Length : cable c ut length = 48.4 XXXX = 60 ± 1.5mm for a total length under 501mm ± 3mm for a total length between 501mm to 900mm ± 0.5% of length for a total length over 900mm 2 (2.5) ±0.10 C Code Overall dimensions M16 Contacts table B (5.8) A Code F1 16068-12 Female F2 F3 16068-32 16068-372 Female Female www.nicomatic.com Mail : [email protected] Tel : +33 (0)4.50.36.13.85 M11 3D view Scale 1 : 2 Contact P/N Type contact 2 This document and drawings, sketches, and schematic drawings are the property of the NICOMATIC company. and no parts thereof may be reproduced and used without the written consent of the owner. Law dated 11.03.1902 D A: Example : Jumper length XXXX = 100 Cable cut length : L = 100 – 11.6 = 88.4 LF contacts reference mark number Table des fixations LF contacts number nn 2 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 Mating housing with the polari zation key on the opposite side of left cable side. The L cabl e cut length is determined as follows : L = XXXX – 11.6 CONNECTOR SERIES 220 FEMALE Length in mm Fixing hardware (refer to the table with Fixing hardware) Contact sel ected on the left side of the cable (refer to the table with contacts on the right) R: This c onfiguration allow to measure the cable length L : Operating temperature : -55°C to +105°C for Polyester cable -55°C to +125°C for Polyethylene naphthalate (PEN) -60°C to +150°C for Polyimide cable (higher temperatures achievable) Dis tance in m m between axies FH : C: Iss 06/07/12 Date J.R. Drawn D.Z. Approved Checked Item : Generic drawing standard MICROFLEX 1 Folder : X:\Méthodes\Plans clients\Plans clients 2D\41 - CMM MF 220\220MFnnPWXXXXD-FHCFHC_cl Catalogue Reference : 220MFnnPWXXXXD-FHCFHC General tolerance ±0.2 A4 Scale 1:1 Page 1/2 A B C D 220 15 COUPE A-A Pas = 2 Premier contact LF D (3.45) MF MicroFlex Pas = 2 5.5 == 4 A F (3.5) (A) B G (3.5) ±0.10 Coté gauche du câble (5.8) - Contact : Phosphore bronze Boitier : Thermoplastique avec fibre de verre Classification UL 94 V0 Noir. Câble : - Polyester blanc Classification UL 2643 or 2690 - Polyéthylène naphthalate (PEN) - Polyimide Fixation : Acier inoxydable . Traitement de surface : - Contact code F1 : Etamé (Epaisseur : Ni 1 to 2µ + Sn pur brillant 3 to 5µ) Contact code F2 : Doré (Epaisseur : Ni 1 to 2µ + Sn pur brillant 3 to 5µ + Au 0.15µ) Contact code F3 : Doré (Epaisseur : Ni 1 to 2µ + Sn pur brillant 3 to 5µ + Au 0.75µ) Spécification Mécanique du contact : 3 - Force Force Force Force d’accouplement maxi par contact : 1 N de désaccouplement mini par contact : 0.2 N d’arrachement mini du câble sur contact : 50 N (using our standard FFC) de rétention du boitier sur contact : 20 N Tension de claquage mini : 1000 Vrms Tension de tenue au claquage mini : 750 Vrms Tension nominale d’utilisation : 250 Vrms Courant Maximum par contact : 3 A Resistance de contact : 15 mOhms max. T ype • • 220 : MF : C Coté gauche du cable Spécification câble 4 2. Spécification câble Série CMM220 MICROFLEX La spécification du câble est déterminée par 4 éléments • nn : Nombre de conducteur • PW : Style du c âble – PW: Standard White Polyester ou – NW: Polyéthylène naphthalate (PEN) ou – KW: Polyimide • XXXX : • D: 3. Coté gauche du câble • • • • L XXXX Température d’utilisation : -55°C to +105°C pour Polyester câble -55°C to +125°C pour Polyéthylène naphthalate (PEN) -60°C to +150°C pour Polyimide câble (Température les plus élevées) Distance en mm Longueur entre les axes en mm Code A: Adhesif en option Longueur de la limande en mm d’un bout à l’autre. (Cette longueur détermine la longueur de coupe du câble, voir paragraphe 5.) Taille du conducteur (0.076 mm x 0.66 mm) 3 Coté droit du câble 5. FH : C: Fixation (Se référer à la table des fixations) Contact sélectionné pour le coté droit du câble (Se référer à la table des contac ts) R: Montage du boitier avec la clef de polarisation à l’opposée de celle du coté gauc he. A: Adhésif utilisé pour fixer les deux câble entre eux (Option). Température d’utilisation -30°C à 125° C L ongueur câble Cette c onfiguration présente la manière de calcul er la longueur L : La longueur L de coupe du câble est déterminée de la manière s uivante : L = XXXX – 11.6 Exemple : Longueur limande XXXX = 100 Longueur du câble coupé : L = 100 – 11.6 = 88.4 Repère des contacts LF Par conséquent vous devez couper le câble à 88.4mm pour une limande de 100mm 1 C D E F G 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 (2.5) Longueur du câble coupé = 48.4 Tolérance de la coupe du c âble: Coté droit du câble B XXXX = 60 ± 1.5mm pour une longueur inférieure à 501 mm ± 3mm pour une longueur entre 501mm et 900mm ± 0.5% pour une longueur supérieure à 900mm 2 (2.5) ±0.10 C Code Encombrement M16 Code P/N Contact Type de contact F1 16068-12 Femelle F2 F3 16068-32 16068-372 Femelle Femelle Vue 3D Echelle 1 : 2 2 06/07/12 www.nicomatic.com Mail : [email protected] Tel : +33 (0)4.50.36.13.85 M11 This document and drawings, sketches, and schematic drawings are the property of the NICOMATIC company. and no parts thereof may be reproduced and used without the written consent of the owner. Law dated 11.03.1902 D Longueur minimum : Fixation FH (5.8) B Table des Contacts 2 A Table des fixations nn nombre LF contacts FH Le coté gauche du câble est déterminé par 3 éléments CONNECTEURS SERIES 220 FEMELLE 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 C Coté droit du cable 1. 4. Spécification de température : - FH Le coté gauche du câble est déterminé par 2 éléments • FH : Fixation (Se référer à la table des fixations) • C: Contact sélectionné pour le coté gauche du câble (Se référer à la table des contacts) Spécification Electrique du contact : - XXXX D - Série CMM220 MATERIEL MATERIEL : - PW E A Caractéristique Technique n n Iss Date J.R. Drawn D.Z. Approved Checked Item : Plan générique du MICROFLEX standard 1 Folder : X:\Méthodes\Plans clients\Plans clients 2D\41 - CMM MF 220\220MFnnPWXXXXD-FHCFHC_cl Catalogue Reference : 220MFnnPWXXXXD-FHCFHC General tolerance ±0.2 A4 Scale 1:1 Page 2/2