Flight Control Systems www.enac.fr

TECHNIQUES AÉRONAUTIQUES
Avionique et ATM
ACTUALISÉ
réf. AVI10
Code OACI 074
ENAC - TA/SYS
FORMATION EN ANGLAIS
Flight Control Systems
This module is common with the equivalent module from AATM Master - AATM 09 : Flight
Control Systems
DURÉE
5 jours
PLACES OFFERTES
20
Objectifs
DATES ET LIEUX
After completing this course you will be able to :
present handling qualities through stability and manoeuvrability notions,
describe the general architecture and the main components of flight control systems of
various technologies, mechanical, hydro mechanical, fly by wire, power by wire,
define flight control systems and describe Airbus system architecture evolutions, main
design goals and constraints,
describe the architecture of automatic flight control systems,
describe the main principles of helicopter flight control.
ENAC Toulouse :
9 mars 2015 au 13 mars 2015
ENAC Toulouse :
23 novembre 2015 au 27
novembre 2015
NO SESSION IN 2016, RECAST
IN PROGRESS.
CONDITIONS DE
PARTICIPATION
Participants concernés
Frais pédagogiques :
Catégorie MS
2015 : 1833 €
2016 : 1890 €
Engineers and executives.
Informations pratiques :
voir en fin de catalogue
CONTACT ADMINISTRATIF
ENAC
[email protected]
Bulletin d'inscription obligatoire :
voir en fin de catalogue
Contenu
Global view of Flight Control Channels :
Generals
Mechanical control system architecture and components (ATR).
Hydromechanical control system architecture and components.
Fly by wire system architecture and components (A320/A330/A340).
New generation, hybrid power source system architecture and components (A380 / A400M
/ A350).
Flight parameters displays.
Handling qualities :
From the pilot to the control surface.
Longitudinal movement : equations, static stability, dynamic stability.
Transverse movement : equations, static stability, dynamic stability.
Pilot Flight controls.
Flight Control Laws : from stability augmentation to full authority protections.
Automatic Flight Control Systems :
Architectures and main certification rules.
Selected modes, mode based autopilot control logic.
Flight Director.
Automatic Landing Systems.
Roll out and taxiing systems.
Case studies : A320 to A380.
Trajectory based Guidance Systems :
RESPONSABLE(S) DU STAGE
Thierry MIQUEL [Air Transport
Department]
www.enac.fr
Guidance modes architecture.
Need for trajectory based guidance.
Current architectures and interfaces.
Managed lateral guidance.
Managed vertical guidance.
New guidance concepts: automatic separation/spacing, 4D trajectory performance based
guidance.
Simulation session :
Flight envelope protections.
Numerical simulation of flight control systems.
Automatic landing sequence.
ENAC : [email protected]
1/2
TECHNIQUES AÉRONAUTIQUES
Avionique et ATM
ACTUALISÉ
réf. AVI10
Code OACI 074
ENAC - TA/SYS
FORMATION EN ANGLAIS
DURÉE
5 jours
Flight Control Systems
Methods
Courses and hands-on.
For information only : 27 hours
PLACES OFFERTES
20
DATES ET LIEUX
ENAC Toulouse :
9 mars 2015 au 13 mars 2015
ENAC Toulouse :
23 novembre 2015 au 27
novembre 2015
NO SESSION IN 2016, RECAST
IN PROGRESS.
CONDITIONS DE
PARTICIPATION
Frais pédagogiques :
Catégorie MS
2015 : 1833 €
2016 : 1890 €
Informations pratiques :
voir en fin de catalogue
CONTACT ADMINISTRATIF
ENAC
[email protected]
Bulletin d'inscription obligatoire :
voir en fin de catalogue
RESPONSABLE(S) DU STAGE
Thierry MIQUEL [Air Transport
Department]
www.enac.fr
ENAC : [email protected]
2/2