1 and 2 vertical augers mixer feeder
Transcription
1 and 2 vertical augers mixer feeder
1 and 2 vertical augers KARTHALA mixer feeder Manufacturer of cost-saving solutions for livestock farming Head office : CARTEL • ZA du Cormélia • F-85500 Chambretaud Factory : ZA La Geneste • F-19460 Naves Tél : +33 (0)2.51.61.50.50 - Fax : +33 (0)2.51.91.50.00 Tél : +33 (0)5.55.20.12.12 - Fax : +33 (0)5.55.20.13.00 Mail : [email protected] - Website : www.silofarmer.fr Important : ce document présente les machines avec leurs caractéristiques à la date d’édition du document. Ces dernières sont données à titre indicatif et ne peuvent être contractuelles du fait de l’évolution permanente des produits. Avant toutes commandes, il est recommandé de demander à nos services les évolutions appliquées sur le matériel et les caractéristiques techniques de vos besoins. Ce matériel est destiné aux professionnels qui reconnaissent avoir évalué les capacités de l’outil par rapport aux travaux qu’ils doivent effectuer. Ils sont proposés sur la base des conditions générales de vente de la société CARTEL stipulées sur les bons de commande. L’ensemble des photos composant ce document, sont non-contractuelles. Single vertical auger KARTHALA mixer feeder from 8 to 16 m 3 A full range of mixers feeders fab Tungsten coated sabre-like knives. 15 mm thick auger in standard. Option 20 mm thick auger. High quality steel auger with wings insuring a homogeneous mix ration and a propelled discharge Tubular welded straw overflow ring with steel plating in standard Galvanized rear lighting bar in standard Hydraulic trap-door with unloading chute and rubber flap in standard at front RHS (additional trap-door at rear LHS in option) Rerversible towing bar in standard Option: Rubber discharge conveyor in vertical position. Discharge conveyor in horizontal position Double vertical augers KARTHALA mixer feeder from 15 to 24 m 3 bricated from high quality steel Double high quality steel augers with wings insuring a homogenous mix ration and a propelled discharge «Temp- O-Coup management system» Option: extra strong magnet Electrical control box with automatic time management of the counterblades (Standard on models KVE) Hydraulic control by levers fitted onto a bracket (optional on models KV) Heavy duty transmission of a double augers mixer feeder. Two-speed gearbox 3 (1 auger) or 4 (2 augers) large diameter weighing cells bolted on the chassis Worm gear reducer with double conical rollers protected in oil bath Oil tank of the auger driving gearbox Simple or programmable weighing device Hydraulic support leg with manual pump Specification : Model Tank capacity m3 (useful) Tareweight (kg) Number of knives / auger Wheels Overall height DIRECT controls with manual counter-knives KV8 8 5 100 8 single 400/60 15.5 2,55 m KV10 10 5 200 8 single 400/60 15.5 2,65 m KV12 12 5 300 10 single 400/60 15.5 2,94 m KV14 14 5 400 11 twin 215/75R17.5 3,15 m KV16 16 5 530 11 twin 215/75R17.5 3,35 m KVD15 15 7520 8 single 445/45 R19.5 2.55 m KVD17 17 7640 8 single 445/45 R19.5 2.66 m KVD20 20 7840 8 single 445/45 R19.5 2.81 m KVD22 22* 8060 10 single 445/45 R19.5 2.98 m KVD24 24* 8 280 11 single 445/45 R19.5 3,11 m ELECTRIC control with hydraulic counter-knives + «Temp-O-Coupe» as standard KVE10 10 5 220 8 single 400/60 15.5 2,65 m KVE12 12 5 320 10 single 400/60 15.5 2,94 m KVE14 14 5 420 11 twin 215/75R17.5 3,15 m KVE16 16 5 550 11 twin 215/75R17.5 3,35 m KVDE15 15 7520 8 single 445/45 R19.5 2.55 m KVDE17 17 7640 8 single 445/45 R19.5 2.66 m KVDE20 20 7840 8 single 445/45 R19.5 2.81 m KVDE22 22* 8060 10 single 445/45 R19.5 2.98 m KVDE24 24* 8 280 11 single 445/45 R19.5 3,11 m Head office : CARTEL • ZA du Cormélia • F-85500 Chambretaud Factory : ZA La Geneste • F-19460 Naves Tél : +33 (0)2.51.61.50.50 - Fax : +33 (0)2.51.91.50.00 Tél : +33 (0)5.55.20.12.12 - Fax : +33 (0)5.55.20.13.00 Mail : [email protected] - website : www.silofarmer.fr