Fiche technique
Transcription
Fiche technique
Fiche technique Den Braven Silicone 8038 Neutral silicone sealant for sanitary, glazing and façade joints Mise en œuvre A joint with the correct dimensions is able to absorb movements between building materials. The joint depth should always be in the correct relationship of the joint width. A general rule is the ratio of joint depth to the width of the joint with a joint width till 10 mm is 1:1, with a minimum of 5 mm in width and depth. For joints wider than 10 mm, the depth is the width devided by 3 plus 6mm. For more information see the Technical Bulletin Joint Dimensions in the Knowledge Base on our website www.denbraven.com. Spécifications techniques Module à 100% N/mm2 0,35 MPa Taux d'extrusion @3 mm & 6,3 bar 200 g/min Description du produit Zwaluw Silicone-NO is a versatile neutral silicone sealant for sanitary, building, glazing and façade joints which cures under influence of humidity to form a durable elastic rubber. Temperature d'application +5°C till +40°C Type Oxime Temp de durcissement Avantages • Neutral curing, almost odourless • Perfect bonding without primer on most substrates • Excellent resistance to UV, water and weather • Non corrosive towards metals • Mold resistant • Good adhesion to glass, painted wood, ceramic, enamelled, stainless steel and many plastics @23°C/50% RH <2 mm/day Densité 1,00 g/ml Allongement à la rupture 500% Resistance au gel pendant le transport -15ºC Capacité de mouvement 12,5% Dureté shore-A DIN 53505 15 Shore A Formation de peau @23°C/55% RH 8 min Résistance à la température Reprise élastique -40°C till +120°C N/mm2 1,25 MPa Applications Zwaluw Silicone-NO has been specially developed for durable elastic sealing of connection and expansion joints in concrete, brickwork, curtain wall constructions, glazing systems(1), kitchens, bathrooms and showers and for industrial applications. Restrictions • Not recommended for use in aquariums, PET, PE, PP, PE, PTFE (Teflon), bituminous surfaces and surfaces containing wax or paraffin Remark (1) Compatibility of the edge seals of insulation glass with glazing sealants cannot be guaranteed by the supplier of the sealant, as the composition of the edge seals can be changed by the producer without mentioning. Advices concerning the compatibility of glazing sealants to the edge seals of insulation glass are based on experience and therefore not guaranteed. • Do not apply for insulating glass sealing Préparation des surfaces et finition Application temperature: +5°C to +40°C (applies to environment and substrates). All substrates must be solid, clean, dry, and free from grease and dust. Clean substrates with Zwaluw Cleaner. Zwaluw Silicone-NO adheres perfectly without the use of a primer to most non Den Braven France sarl. Z.I. Le Meux - Rue du buisson du roi - BP 20114 – FR 60881 LE MEUX CEDEX T +33 (0)3 44 91 68 68 | F +33 (0)3 44 91 68 92 | E [email protected] 2017-02-16 09:15:06 UTC Fiche technique Den Braven Silicone 8038 Neutral silicone sealant for sanitary, glazing and façade joints porous substrates. Porous substrates to be pre-treated with Zwaluw Primer B1. Always test adhesion prior to application. Use Zwaluw Finisher to smooth the joint. Mise en peinture Zwaluw Silicone-NO is not paintable. It is recommended to cover the edges of the joint with masking tape in order to prevent that surfaces which remain to be painted will be contaminated with silicone. Nettoyage Uncured material and tools can be cleaned by using Zwaluw Cleaner. Cured material can only be mechanically removed. Hands can be cleaned with Zwaluw Wipes. Couleur(s) standard(s) • White • Transparent • Aluminium grey Conditionnement • Cartridge 300 ml Stockage et conservation In unopened original packaging between +5°C and +25°C, shelflife till 12 months after production date, stored in a dry place. Sécurité Avant l’utilisation du produit, la Fiche de Données de Sécurité (FDS) doit être lue et comprise. FDS disponible sur demande pour les utilisateurs professionnels et sur notre site internet. Garantie Den Braven garantit que son produit est conforme à sa spécification durant sa durée de conversation Disclaimer Les informations dans ce document et aussi dans nos publications imprimées et digitales sont fondées sur nos connaissances et expériences actuelles. Den Braven n’est pas responsable des fautes, inexactitudes ou déficiences rédactionnelles qui sont le résultat de changements ou recherches technologiques entre la date de publication de ce document et la date de l’acquisition du produit. Den Braven se réserve le droit de changer des formulations. Avant d’appliquer le produit l’utilisateur doit se familiariser avec les informations présentées dans ce document et/ou dans tout autre document y afférent. Avant l’application du produit l’utilisateur doit effectuer les tests nécessaires pour assurer que le produit est adapté à l’application. La méthode d’application, les conditions lors du stockage et du transport échappent à notre contrôle et seront en conséquence pas de notre responsabilité. Une responsabilité pour cette fiche d’information produit ne peut pas être acceptée. Les livraisons se font uniquement à nos conditions de livraison et modalités de paiement. Les informations détaillées de la présente fiche technique sont données à titre indicatif et ne sont pas exhaustives. Den Braven France sarl. Z.I. Le Meux - Rue du buisson du roi - BP 20114 – FR 60881 LE MEUX CEDEX T +33 (0)3 44 91 68 68 | F +33 (0)3 44 91 68 92 | E [email protected] 2017-02-16 09:15:06 UTC