Curriculum Vitae - Université Paris-Est Marne-la

Transcription

Curriculum Vitae - Université Paris-Est Marne-la
Curriculum Vitae
Anas Batou
Assistant professor, HDR
Laboratoire Modélisation et Simulation Multi Echelle
Université Paris-Est Marne-la-Vallée
5, Bd Descartes
77 454 Marne-la-Vallée Cedex 2
Tel. : 01 60 95 77 92
Fax : 01 60 95 77 99
E-mail : [email protected]
Born September 10, 1981, in Amiens (France).
Education
2001–2005 : ENS Cachan - Mechanical Engineering (M.S. eq.).
2004–2005 : Master ’Engineering Science’ àt Ecole Centrale de Paris - Structural Dynamics and Coupled Systems (M.S. eq.).
2005–2008 : Ph.D. at Université Paris-Est Marne-la-Vallée, supervised by C.Soize and
entitled ’Identification of stochastic forces applied to a nonlinear dynamical system using an uncertain computational model and experimental
responses’.
June 2014 : ’Habilitation à diriger des recherches’ entitled ’Structural dynamics and
rigid body dynamics - Uncertainty quantification and reduced-order modeling’.
Work Experience
2008–2010 : ATER (temporary professor) at Université Paris-Est Marne-la-Vallée.
2010–
: Assistant professor at Université Paris-Est Marne-la-Vallée.
Research interests
— Uncertainty quantification in structrural dynamics.
— Uncertainty quantification in multibody dynamical systems.
— Model reduction in LF/MF dynamics.
— Generation of seismic accelerogramms.
Publications
Book chapters :
[1] A. Batou, C. Soize, Random dynamical response of a multibody system with uncertain rigid bodies, in Computational Methods in Stochastic Dynamics - Vol. 2,
Springer, Chapter 1, Pages : 1-14, 2012. doi :10.1007/978-94-007-5134-7_1
Publications in peer-reviewed international journals :
[1] C.K. Choi, A. Batou, H.H. Yoo, Reliability design of multibody systems using samplebased extreme value theory, Multibody System Dynamics, online, 1-28, 2015.
doi : 10.1007/s11044-015-9482-7.
[2] O. Ezvan, A. Batou, C. Soize, Multilevel reduced-order computational model in structural dynamics for the low- and medium-frequency ranges, Computers and Structures,
160, 111-125, 2015. doi : 10.1016/j.compstruc.2015.08.007
[3] A. Batou, A global/local probabilistic approach for reduced-order robust modeling
adapted to the low- and mid-frequency structural dynamics, Computer Methods in
Applied Mechanics and Engineering, 294, 123-140, 2015. doi :10.1016/j.cma.2015.06.007
[4] A. Batou, Model updating in structural dynamics - Uncertainties in the position and
orientation of sensors and actuators, Journal of Sound and Vibration, in press, 2015.
doi :10.1016/j.jsv.2015.06.017
[5] A. Batou, C. Soize, S. Audebert, Identification of a stochastic computational model
using experimental modal data, Mechanical systems and Signal Processing, 50-51 (-),
307-322 (2015). doi :10.1016/j.ymssp.2014.05.010
[6] A. Batou, T.G. Ritto, R. Sampaio, Entropy propagation analysis in stochastic structural dynamics : Application to a beam with uncertain cross sectional area, Computational Mechanics, 54(3), 591-601 (2014), 2014. doi :10.1007/s00466-014-1008-2
[7] A. Batou, C. Soize, Generation of accelerograms compatible with design specifications
using information theory, Bulletin of Earthquake Engineering, 12(2), 769-794, 2014.
doi :10.1007/s10518-013-9547-z.
[8] A. Batou, C. Soize, Calculation of Lagrange multipliers in the construction of maximum entropy distributions in high stochastic dimension, SIAM/ASA Journal on Uncertainty Quantification, 1(1), 431-451, 2013. doi :10.1137/120901386.
[9] A. Arnoux, C. Soize, A. Batou, L. Gagliardini, Reduced-order computational model
for low-frequency dynamics of automobiles, Advances in Mechanical Engineering,
(Article ID 310362), 1-12, 2013. doi :10.1155/2013/310362.
[10] A. Batou, C. Soize, Stochastic modeling and identification of an uncertain computational dynamical model with random fields properties and model uncertainties,
Archive of Applied Mechanics, 83(6), 831-848,2013. doi :10.1007/s00419-012-0720-7
[11] A. Arnoux, A. Batou, C. Soize, L. Gagliardini, Stochastic reduced order computational model of structures having numerous local elastic modes in low frequency
dynamics, Journal of Sound and Vibration, 332, 3667-3680, 2013.
doi :10.1016/j.jsv.2013.02.019
[12] A. Batou, C. Soize, Uncertainty quantification in low-frequency dynamics of complex
beam-like structures having a high-modal density, International Journal for Uncertainty Quantification, 1(1), 431-451, 2013.
doi :10.1615/Int.J.UncertaintyQuantification.2012005286
[13] V.E.D.Sacramento, R.Sampaio, T.G.Ritto, A.Batou, Integrity of an offshore structure
subjected to waves : A stochastic analysis, Mecànica Computacional 12, 747-761
(2013).
[14] A. Batou, C. Soize, N. Brie, Reduced-order computational model in nonlinear structural dynamics for structures having numerous local elastic modes in the low-frequency
range. Application to fuel assemblies, Nuclear Engineering and Design, 262, 276-284,
2013.
[15] A. Batou, C. Soize, Rigid multibody system dynamics with uncertain rigid bodies,
Multibody System Dynamics,27(3), 285-319, 2012. doi :10.1007/s11044-011-9279-2
[16] C. Soize, A. Batou, Stochastic reduced-order model in low-frequency dynamics in presence of numerous local elastic modes, Journal of Applied Mechanics - Transactions
of the ASME, 78(6), 061003, 2011. doi :10.1115/1.4002593
[17] A. Batou, C. Soize, M. Corus, Experimental identification of an uncertain computational dynamical model representing a family of structures, Computer and Structures,
89(13-14), 1440-1448, 2011. doi :10.1016/j.compstruc.2011.03.004
[18] A. Batou, C. Soize, Experimental identification of turbulent fluid forces applied to
fuel assemblies using an uncertain model and fretting-wear estimation, Mechanical
systems and Signal Processing, 23, 2141-2153, 2009. doi :10.1016/j.ymssp.2009.03.018
[19] A. Batou, C. Soize, Identification of stochastic loads applied to a non-linear dynamical system using an uncertain computational model and experimental responses,
Computational Mechanics, 43, 559-571, 2009. doi :10.1007/s00466-008-0330-y
[20] A. Batou, C. Soize, Experimental identification of stochastic processes using an uncertain computational non-linear dynamical model, Journal of Physics : Conference
Series 135, (1) 012014. doi :10.1088/1742-6596/135/1/012014
[21] C. Soize, A. Batou, Identification of stochastic loads applied to a non-linear dynamical system using an uncertain computational model, Mathematical Problems in
Engineering, (Article number 181548), 1-16, 2008. doi :10.1155/2008/181548
Research projects
2009–2012 : Participation in the project "Réduction modale basée sur une séparation
des modes structuraux globaux et locaux imbriqués en vibroacoustique
numérique pour la réponse statistique basse et moyenne fréquence de systèmes complexes incertains. Application à l’Avance de Phase en synthèse
automobile", funded par PSA Peugeot-Citroën.
2009–2010 : Coordinator of the project "Construction of a probabilistic computational model representing a family of ISS motors". Partnership Project
between EDF R&D and Université Paris-Est Marne-la-Vallée.
2010
: Coordinator of the project "Construction of a reduced-order model of
fuel assemblies", funded by EDF R&D.
2011–2013 : Participation in the project TYCHE - Advanced methods using stochastic modeling in high dimension for uncertainty modeling, quantification
and propagation in computational mechanics of solids and fluids, funded
by "Agence Nationale de la Recherche" (programme blanc). Lead by C.
Soize (Université Paris-Est Marne-la-Vallée) and with the additional participation of Institut de Recherche en Génie Civil et Mécanique (Ecole
Centrale Nantes), Laboratoire d’Informatique pour la Mécanique et les
Sciences de l’Ingénieur (CNRS) and Laboratoire de Mécanique des Sols,
Structures et Matériau.
2012–2014 : Scientific responsible MSME in the project SICODYN - pour des SImulations crédibles via la COrrélation calcul-essai etl’estimation d’incertitudes en DYnamique des structures funded by FUI12/FEDER6. Lead
by S. Audebert (EDF R&D) and with the additional participation of
CETIM, LMT, FEMTO-ST, LAMCOS, NECS, Phimeca Engineering,
SAMTECH France, SULZER Pompes France, VIBRATEC.
2013–2016 : Coordinator of the project "HiMoDe - Reduced order model for dynamical structures having a High Modal Density in the low frequency range",
funded by "Agence Nationale de la Recherche" (programme Young Researchers).
2013–2014 : Participation in the Korea/France STAR project entitled "Uncertainty
quantification for multibody dynamical systems" funded par the ministère des affaires étrangères / NRF. With the participation of University
Paris-Est Marne-la-Vallée (A. Batou and Prof. C. Soize) and Hanyang
University, Séoul ( C.K. Choi and Prof. H.H. Yoo).
2013–2016 : Participation in the project TURBODYNA - Robust modeling of the
nonlinear dynamic mistuning of bladed disks, funded by ANR and DGA
(ASTRID). Lead by E. Capiez-Lernout (MSME).
Student supervisions
Ph.D. Students :
2010–2013 : Adrien Arnoux : "Reduced order models for low frequency dynamics of
automotive vehicles". Co-direction (50 %) with C. Soize and L. Gagliardini (PSA).
2013–2016 : Olivier Ezvan : "Reduced order modeling for for large band dynamical
analysis and uncertainty quantification". Co-direction (70 %) with C.
Soize.
Master Students :
2010
2010
2011
2011
2012
2012
2013
2014
: Viet Dung Hoang : "Reduced order model for truss like structures in
presence of numerous local elastic modes".
: Van Hai Nguyen : "On the use of genetic algorithm for the identification
of probabilistic model parameters in structural dynamics".
: Hai Quan DO : "Analysis and comparison of substructuring methods".
: Khanh Ngoc Nguyen : "Identification of the parameters of a probabilistic
model of uncertainties of a rigid body using experimental responses".
: Olivier Ezvan : "Analysis and comparison of dynamical condensation
methods".
: Benjamin Morin : "Interpolation of reduced order model in structural
dynamics".
: Oliver Ezvan : "Separation of small/medium/large-wavelengths elastic
modes".
: Déborah Lavazec (co-encadrement) : "New metamaterials for the attenuation of noise and vibration in civil engineering and transport".
Bachelor Students :
2012
2013
2013
: Mehdi Belarbi : "Implementation of a user interface for the visualization
of multibody system motions".
: Eshan Coowar : "Implementation of a validation procedure for a FE
software".
: Antonin Dubois : "Construction of a multibody dynamical system of an
hanging car motor".

Documents pareils