SPN0311 MOLD RELEASE AGENT

Commentaires

Transcription

SPN0311 MOLD RELEASE AGENT
Tél : (450) 974-1001
Watts : 1 800 363-2660
Fax : (450) 974-0162
1001 boul. Industriel
Saint-Eustache (Québec)
Canada, J7R 6C3
Courriel : [email protected]
FICHE TECHNIQUE
TECHNICAL DATA
SPN0311
MOLD RELEASE AGENT
PRODUCT TYPE:
FIRST AID TREATMENT:
Solvent-silicon based
If splashed in eyes or on skin, flush with water. If
swallowed, do not induce vomiting; give 3 or 4glass of
milk or water. Call a physician immediately. If spilled on
clothing remove quickly.
SUGGESTED USES:
SPN0311 is a solvent based, silicon releasing agent
for epoxy molds.
TECHNICAL PROPERTIES:
Colour:
Odour:
Consistency:
% Solids by weight:
Specific Gravity:
Clear transparent
Naphthanic
Liquid
7-9 %
0.68-0.69 kg/l
Shelf Life: 6 months in sealed containers at room
temperature (NB: Keep from freezing).
SAFETY INSTRUCTIONS:
Extremely flammable, poison.
For industrial use only.
Keep away from heat, open flame, spark and pilot lights.
Use only under well ventilated conditions.
Harmful or fatal if swallowed.
Vapour harmful. Avoid splashing in eyes.
The data and suggestions contained herein are offered in good faith and based on information which is reliable. He however, no warranty is expressed or implied regarding the accuracy of
this data or use of the product since the conditions and methods of use are beyond our control. Nothing contained herein shall be constructed to imply the non-existence of any relevant
patents nor to constitute a permission, inducement or recommendation to practice any invention covered by us or others, without authority from the owner of the patent
Les renseignements ci-dessus sont vrais et précis au meilleur de notre connaissance. Toutes les recommandations ou suggestions sont faites sans aucune garantie étant donné que le
vendeur ne peut contrôler l’emploi de ce produit, l’usager prend les risques d’emploi, de manipulation, qu’ils soient ou non en accord avec nos directives et le vendeur n’assume aucune
responsabilité.
Page 1 sur 1