Data Sheet Title

TASKI Jontec Eternum
High gloss floor emulsion
Description
High-gloss, slip-resistant floor emulsion for most types of smooth and
water resistant, hard floors.
Its technology gives superior traffic resistance against scuffs and dirt.
It ensures reduced maintenance costs to improve productivity. Easy
to apply, it will be ideal in all prestige and heavy traffic areas where
ordinary emulsions require a high level of maintenance.
Key properties
• High-gloss, protective layer.
• Hard, durable and wear resistant protection.
• Easy to apply, short drying time.
• Slip resistant according to international standards (ASTM D2047).
• Easy to repair.
Benefits
• Enhances the natural appearance of the floor by providing a long
lasting high gloss finish.
• Superior resistance to scuff marks and dirt, even under heavy
traffic.
• Excellent adhesion on most floor types such as vinyl, synthetic,
linoleum, stone, sealed wood and cork floors. Can be applied
with a mop or an applicator. Spreads evenly for perfect leveling.
• Guaranteed safety for your employees and customers.
• Responds to most common maintenance methods.
Instructions for use
Dosage:
This product is ready to use. Apply undiluted.
Application:
Treat only stripped and thoroughly rinsed and completely dry floors.
Treat porous and damaged floors with one of the JohnsonDiversey
floor sealers prior to application.
Sparingly pour the product onto the floor and evenly spread it while
still wet with a polish applicator in overlapping lanes of 1-1.5m.
F2e
TASKI Jontec Eternum
Allow to dry completely (20-30 minutes) before applying additional coats in similar manner. Apply two
coats to non-porous, smooth floors. Three coats are usually sufficient for porous floors.
Linoleum: After the first coat has dried, smooth the linoleum floor with a single disc machine equipped
with a blue pad, then damp mop and allow to dry completely before applying additional coats.
Top stripping and recoating:
Use a JohnsonDiversey floor stripper to remove one coat of polish and pick up soiled solution with a
scrubber drier or wet vacuum cleaner. Allow to dry completely and apply additional coat(s).
Important:
Do not dilute or mix with other substances. Do not use on structured plastic (cushioned vinyl) and
unsealed wood or cork. Seek advice for use on profiled/studded rubber floors. Do not use outdoors or in
wet zones.
Properties
Appearance
pH (neat)
Relative Density @ 20°C
Coverage
Milky white liquid
8.2 – 8.7 typical
1.04 typical
20-40 ml/m2.
The data above is typical of normal production and should not be taken as specification.
Available pack sizes
25L
Drums
2x5L Bottles
Safety Precautions
Essentially non hazardous.
In case of contact with eyes flush immediately with water, seek medical attention if irritation persists. In
case of inhalation remove to fresh air and monitor. In case of ingestion rinse out mouth and then drink
one or two glasses of water (or milk). In case of persistent symptoms obtain medical attention.
Full guidance on the handling and disposal of this product is given in a separate Material Safety Data
Sheet.
For more information
Please consult your local JohnsonDiversey representative.
JohnsonDiversey South Africa (Pty) Ltd
Reg. No. 1993/006222/07
Head Office
Cnr Nagington & Rossouw Rds
Wadeville
Durban
West End House
No. 30 The Boulevard
West End Office Park
Westville
Cape Town
2nd Floor
Old Warehouse Building
Black River Park
Fir Street
Observatory
Port Elizabeth
89A Pickering Str
Newton Park
Port Elizabeth
P/Bag X037
Wadeville
1422
P O Box 529
New Germany
3620
P O Box 409
Eppindust
7475
P O Box 222
Port Elizabeth
6000
Tel.: (011) 871 9000
Fax: (011) 827 9795
(031) 265 2030
(031) 265 2035
(021) 448 1424
(021) 448 1987
(041) 365 7011
(041) 365 7045