Detector base
Transcription
Detector base
FDB221, FDB201 SintesoTM Detector base addressable, collective z Base made from impact-proof and scratch-resistant synthetic material z Screwless terminals for easy connection without any tools z Completely covered by the detector z Recess or surface mounting z Accessories for surface mounting, humid or wet environments, theft preven- tion, dust protection, location inscription and detector heating unit against moisture condensation or frost formation z Version for addressable or collective fire detectors z Ecologic material concept Building Technologies Fire Safety & Security Products Characteristics z Environmental – ecologically processing – recyclable materials z Characteristics – universal base, suited for surface and recess mounting – extra-large mounting slots facilitate a re-use of existing drill holes resulting from other systems – large opening in the detector base for easy cable insertion – screw less terminals (spring clip principle) – detector line can be connected without any tools; the wire can be simply plugged in manually – loop contact – place for auxiliary terminals, for the connection of 2 response indicators, cable screening or the connection of a detector heating unit Detector base z FDB221 – for fire detectors with addressable signal processing – terminals ‘orange’, wire cross-sectional area from 0.2 to 1.6 mm2 z FDB201 – for fire detectors with collective signal processing – terminals 'grey', wire cross-sectional area from 0.2 to 1.6 mm2 z Application – for recess mounting – for surface mounting, cable diameter up to 6mm Detector base height 22mm Height with inserted detector 54mm Mounting slots min. 46mm to max. 79mm Loop contact Screwless connecting terminals ∅ 100 Opening for cable entry Auxiliary terminals / Micro terminals z DBZ1190-AA – for conductors of max. 0.5 mm2 z DBZ1190-AB – for conductors of max. 2.5 mm2 – for the connection of 2 response indicators or cable screening DBZ1190-AB DBZ1190-AA 2 Building Technologies Fire Safety & Security Products FDB201 / FDB221 Detector bases Designation plate z FDBZ291 – to identify the location address Detector heating z FDBH291 – for the operation of the fire detectors in critical environments, danger of frost formation or moisture condensation, e.g. in cold storage houses, attics, loading ramps, cheese storage cellars, etc. – optimum function of the detector heating is only ensured with the auxiliary base FDB291 – the temperature of the detector is increased by approx. 2° in relation to the ambient temperature, so that moisture condensation is prevented – detector heating is fixed to the detector base with a spring-loaded catch 3 Building Technologies Fire Safety & Security Products Detector locking device z FDBZ293 – to protect the detector against theft Threaded pin M3x6 Hexagonal wrench Base attachment z FDB291 – for the supply of surface-mounted lines > ∅6mm – when the detector heating unit is used – detector base FDB201/221 fixed with spring-loaded catch Detector base height 25mm Height with inserted detector 60mm Opening for cable entry Mounting slots min. 46mm, max. 90mm ∅ 120 Base attachment wet z FDB292 – for mounting in humid or wet environments – detector base FDB201/221 fixed with spring-loaded catch Monting holes 153,5mm Detector base height 49mm Height with inserted detector 87mm 135 4 Building Technologies Fire Safety & Security Products Base adapter z FDB281 – adapter for MS8 detector base (existing, addressable MS8 fire detection systems) Detector base MS8 Detector base height 37mm Height with inserted detector 73mm Adapter incl. addressable detector base, connecting terminals ‘orange’ Protective cage z DBZ1194 – for the protection of the detector against damage – can only be used together with the base attachment FDB292 Detecter base height with inserted protective cage = 145mm ∅ 158,5 Detector dust cap z FDZ291 – to cover the detector, for the protection against dust during construction work 5 Building Technologies Fire Safety & Security Products Technical data Detector base FDB201/221 Detector heating FDBH291 Conductor cross section - Connecting terminals in detector base - Auxiliary terminals - Micro terminals Operating temperature Storage temperature Humidity Protection category EN60529 / IEC529 Color Operating voltage (normal operation) Operating current Operating temperature Humidity acc. to DIN 40040 0.2... 1.6 mm2 1.0... 2.5 mm2 0.25... 0.5 mm2 according to data sheet detectors IP44 pure white (RAL9010) 20... 30 VDC 35... 55 mA –30... +40 °C ≤ 95 % rel. Details for ordering Type FDB201 FDB221 FDBZ291 FDBH291 Detector base Accessories Part no A5Q00003814 A5Q00001664 A5Q00002621 A5Q00004439 DBZ1190-AA 4677080001 DBZ1190-AB 4942340001 FDBZ293 A5Q00005035 FDB291 FDB292 FDB281 DBZ1194 FDZ291 A5Q00001603 A5Q00003940 A5Q00004929 4677110001 A5Q00004814 Designation Detector base collective Detector base addressable Designation plate Detector heating incl. micro terminals DBZ1190-AA Micro terminals 0.28... 0.5 mm2 Auxiliary terminals 1.0... 2.5 mm2 Detector locking device (2 hexagonal key, 100 hexagonal socket pins) Base attachment Base attachment wet Base adapter Protective cage Detector dust cap Weight 0.028 kg 0.028 kg 0.002 kg 0.032kg 0.001 kg 0.007 kg 0.038 kg 0.040 kg 0.328 kg 0.090 kg 0.133 kg 0.005 kg Detector see data sheet 007005 Siemens Switzerland Ltd Building Technologies Group International Headquarters Alte Landstr. 411 CH-8708 Männedorf Tel. +41 1 - 922 6111 Fax +41 1 - 922 6450 www.sbt.siemens.com Document no. 007775_b_en_-- Edition 12.2004 © 2004 Copyright by Siemens Switzerland Ltd Data and design subject to change without notice. Supply subject to availability. Manual FD20 Section 7