Foam Putty - Stanbridges
Transcription
Foam Putty - Stanbridges
Foam Putty Foam Putty’s special formula makes it ideal to use with foam. Instructions: Stir Foam Putty. If too dry, mix 1 teaspoon water with 8 ounces Putty. Smooth on foam using fingers or putty knife. Sand, carve and paint when completely dry. Carve shapes and add final detailing with Foam Knife (ST1433) or Hot Wire Foam Cutter (ST1435). INSTRUCTIONS: Agiter mousse putty. Si trop sec, mélanger 5 mL l’eau de 236 mL de putty. Bon de mousse utilisant les doigts ou couteau à mastic. Le sable, se tailler et de peinture lorsque complètement sec. Tailler formes et ajouter final détaillant avec mousse couteau (ST1433) ou fil chaud mousse coupeur (ST1435). CAUTION: May irritate eyes. Avoid eye contact. Avoid prolonged inhalation of dust, should sanding be necessary. First aid: In case of eye contact, flush eyes with plenty of water for at least 10 minutes. Consult a physician immediately. Cutting tools recommended. Use with care. MISE EN GARDE: Peut irriter les yeux. Éviter tout contact avec les yeux. Eviter l'inhalation prolongée de poussières, sablage devrait être nécessaire. Premiers soins: En cas de contact avec les yeux, rincer les yeux avec de l'eau pendant au moins 10 minutes. Consultez immédiatement un médecin. Outils de coupe recommandés. Utilisation avec soin. Made in USA Woodland Scenics ® Conforms to Health Requirements of ASTM D4236 This item is not a Children’s Product and is not intended for use by Children. E6 ©1998 O CO PO Box 98, Linn Creek, MO 65052 • woodlandscenic.com